2024 SAP C_TS422_2023 Exam Dumps Questions

SAP certification is a highly valuable and sought-after certification for IT professionals seeking to enhance their knowledge and expertise. C_TS422_2023 exam is specifically designed to validate the skills required to configure and maintain the SAP Certified Associate platform, which is widely used by businesses around the world. These C_TS422_2023 exam dumps questions are specifically designed to help you prepare for the exam by testing your knowledge and providing you with valuable insights into the types of questions that you will encounter. Test free SAP C_TS422_2023 exam questions below.

Page 1 of 3

1. Which materials have a negative quantity in a bill of material or in a recipe? Note: There are 3 correct answers to this question

Continuous flow materials

Bulk materials

By-products

Co-products

Waste products

 Loading...

2. What could be the reason for multiple commitments, where several operations have the same scheduled dates on a work center after dispatching? Note: There are 2 correct answers to this question.

The Finite Scheduling indicator is NOT set in the strategy profile.

The work center has several individual capacities

The Change Planning Direction indicator is set in the strategy profile

Alternative work centers are fully occupied.

 Loading...

3. You want to set up a make-to-order planning scenario for a finished material. The bill of material contains two components: one should be procured for each sales order individually, and the other should be procured jointly for all independent requirements Forecasting for the finished product is NOT possible.

Which settings do you make to achieve this?

Choose planning strategy 50 (Planning without final assembly) and select the ― corresponding Individual/Collective indicator.

Choose planning strategy 50 (Planning without final assembly) and select the corresponding Mixed MRP indicator.

Choose planning strategy 20 (Make-to-Order) and select the corresponding Mixed MRP indicator.

Choose planning strategy 20 (Make-to-Order) and select the corresponding ndividual/Collective indicator.

 Loading...

4. where does the system check master data selection settings during the creation of planned orders and production orders? Note: There are 3 Correct answers to this question.

in the bill of material (BOM)

in the work centers

in the MRP controller

In the routing

in the production version

 Loading...

5. Which time elements does MRP consider in backward scheduling to determine the order dates for components from dependent requirements? Note: There are 2 correct answers to this question

Total replenishment lead time

Operation duration

Planned delivery time

In-house production time

 Loading...

6. For production orders, cost object controlling (COC) can be carried out on an order-related or product- related basis.

Which of the following do you have to consider? Note: There are 2 correct answers to this question.

In pro duct-related COC, all costs are debited and credited to a product cost collector.

Order-related COC is beneficial in a flexible production environment

Product-related COC is used in manufacturing for co-products

In order-related COC, individual production orders do NOT have cost segments.

 Loading...

7. which SAP application can be used for forecasting in Supply Chain Planning? Note: there are 2 correct answers to this question.

Integration Business Planning (IBP)

Capacity Requirement Planning (CRP)

Supply Chain Management (SCM)

Material Requirement Planning (MRP)

 Loading...

8. Which of the following processes lead to an entry in the MRP planning file? Note: There are 3 correct answers to this question.

Changing the storage bin in warehouse management

Changing the procurement type in the product master

Changing the operation times in the production data structure

Changing the stock in inventory management

Changing the purchasing contract in materials management

 Loading...

9. For a production version to be valid and consistent, what requirements must be fulfilled? Note: There are 3 correct answers to this question.

The deletion flag must NOT be set for the bill of material (BOM) or the routing

The lot size range must be within the lot size range of the assigned routing.

The assigned routing and bill of material (BOM) must be valid in the entire validity period.

The assigned routing must be a rate routing.

The assigned routing must NOT have alternative sequences

 Loading...

10. Under what circumstances can you change the material type for a material if stocks, reservations, or purchasing documents exist? Note: There are 2 correct answers to this question.

The same batch management level is used

The same base unit of measure is used.

The quantity and value updates are the same

The same account category is used

 Loading...

Page 2 of 3

11. You can you use capacity availability checks for production orders, which settings have to be made for this? Note: There are 2 Correct answers to this question?

The relevant for finite scheduling indicator must be set.

A checking rule must be assigned to the work centers

An overall profile must be assigned in the checking control

The scope of check must be defined in customizing.

 Loading...

12. You have maintained the parameters for simple discontinuation in the material master of a component.

Which business process will be affected if the available stock is zero and the discontinuation date is in the past?

Kanban

Material requirements planning

Backflushing

Production order release

 Loading...

13. Which options do you have to plan both quantities and capacities during line loading in repetitive manufacturing? Note: There are 2 Correct answers to this question?

Run MRP with quota arrangement

Run PP/DS heuristic for repetitive manufacturing

Assign planned orders manually in the planning table

Assign planned orders manually in the planning table

 Loading...

14. What are the possible results of a production planning run in Advanced Planning (PP/DS)? Note: There are 2 correct answers to this question.

Scheduling agreement schedule line

Purchase Order

Planned Order

Production Order

 Loading...

15. Your company manufactures materials whose specifications differ for each manufacturing process.

Which application do you have to use in SAP S/4HANA to be able to track and use this information in all areas of logistics?

Engineering change management

Quality management

Process order management

Batch management

 Loading...

16. How can you support a GMP (Good Manufacturing Practice)-compliant production process? Note: There are 3 correct answers to this question.

Approved resources

Digital signature

Batch record

GMP-compliant flag

Recipe approval

 Loading...

17. Mode selection is one of the scheduling options available with Advanced Planning in SAP S/4HAN

A. When can you use mode selection?

A. When multiple production versions are maintained for one product

B. When multiple operations are maintained for one product

C. When alternative resources are used within one operation

D. When multiple planned orders exist on one resource

 Loading...

18. What is the work center hierarchy in capacity planning?

A group of work center in a parallel sequence that is used to split production quantities and work on them in parallel

A group of alternative work centers providing a cumulative available capacity for production

A group of work centers in a production line being used in sequence for production

A group of alternative work centers for production, structured in hierarchy levels by priorities

 Loading...

19. which actions does the system perform by default when you save a confirmation for a finished product in repetitive manufacturing? Note: There are 3 Correct answers to this question.

Posting of production costs to the production cost collector

posting of goods receipt for the product

Reduction of associated capacity requirements

Archiving of document for assembly scrap

Material staging for next order in sequence

 Loading...

20. Which time elements are part of a routing operation? Note: There are 3 correct answers to this question.

Move Time

Pick/pack time

Setup time

Float before production

Queue time

 Loading...

Page 3 of 3

21. Why would you use phantom assemblies? Note: There are 3 correct answers to this question.

To increase the number of planning levels

To simplify the structure of bills of material

To reduce the number of material masters

To make the assignment of components easier

To reduce the number of changes required in bills of material

 Loading...

22. Which master data object governs the relationship between supply source and demand source in the Kanban process?

Replenishment strategy

Production supply area

Control cycle

Rate routing

 Loading...

23. You are trying to create a production order and NO valid production version can be selected.

What could be the reasons? Note: There are 2 correct answers to this question.

NO bills of material (BOMs) are assigned to the production versions.

All production versions for the material are locked.

The order lot size is NOT within the validity range of a production version.

NO production lines are assigned to the production versions..

 Loading...

24. Your production planners must execute planning only for specific resources.

How can you achieve this in Advanced Planning (PP/DS)?

Use a propagation range.

Use a resource group

Use a planning area.

Use a planning group.

 Loading...

 Loading...