2V0-41.24 Dumps Help You Study Objectives

By practicing with 2V0-41.24 exam-like questions, you can identify areas where you may need to focus your studies. VMware 2V0-41.24 dumps can help you create a more targeted study plan and avoid wasting time studying topics you already know well. Taking 2V0-41.24 dumps can help you get used to the format and structure of the real exam. 2V0-41.24 dumps can help you feel more comfortable and confident on exam day, which can improve your chances of success. Practice VMware 2V0-41.24 exam free dumps below.

Page 1 of 4

1. Which of the two following characteristics about NAT64 are true? (Choose two.)

NAT64 requires the Tier-1 gateway to be configured in active-active mode.

NAT64 is stateless and requires gateways to be deployed in active-standby mode.

NAT64 is supported on Tier-0 and Tier-1 gateways.

NAT64 is supported on Tier-1 gateways only.

NAT64 requires the Tier-1 gateway to be configured in active-standby mode.

 Loading...

2. Which two statements are true about IDS Signatures? (Choose two.)

Users can upload their own IDS signature definitions.

An IDS signature contains data used to identify known exploits and vulnerabilities.

An IDS signature contains data used to identify the creator of known exploits and vulnerabilities.

IDS signatures can be High Risk, Suspicious, Low Risk and Trustworthy.

An IDS signature contains a set of instructions that determine which traffic is analyzed.

 Loading...

3. A customer is preparing to deploy a VMware Kubernetes solution in an NSX environment.

What is the minimum MTU size for the UPLINK profile?

1700

1500

1550

1650

 Loading...

4. What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?

MTU should be set to 1700 or greater across the data center network including inter-data center connections.

MTU should be set to 1500 or less only on inter-data center connections.

Configure Path MTU Discovery and rely on fragmentation.

MTU should be set to 1550 or less across the data center network including inter-data center connections.

 Loading...

5. Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

Route Aggregation

Route Distribution

BGP Neighbors

Graceful Restart

Local AS

 Loading...

6. Which two statements are true for IPSec VPN? (Choose two.)

IPSec VPN services can be configured at Tier-0 and Tier-1 gateways.

Dynamic routing is supported for any IPSec mode in NS

IPSec VPNs use the DPDK accelerated performance library.

VPNs can be configured on the command line interface on the NSX manager.

 Loading...

7. 1.What is the VMware recommended way to deploy a virtual NSX Edge Node?

Through the NSX Ul

Through automated or interactive mode using an ISO

Through the vSphere Web Client

Through the OVF command line tool

 Loading...

8. A customer has a network where BGP has been enabled and the BGP neighbor is configured on the

Tier-0 Gateway. An NSX administrator used the get gateways command to retrieve this information:





Which two commands must be executed to check BGP neighbor status? (Choose two.)

vrf 3

sa-nsxedge-01(tier0_dr)> get bgp neighbor

vrf 1

sa-nsxedge-01(tier1_sr)> get bgp neighbor

sa-nsxedge-01(tier0_sr)> get bgp neighbor

vrf 4

 Loading...

9. Which two built-in VMware tools will help identify the cause of packet loss on VLAN Segments? (Choose two.)

Flow Monitoring

Traceflow

Live Flow

Packet Capture

Activity Monitoring

 Loading...

10. An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.

What two are the prerequisites for this configuration? (Choose two.)

The cluster configuration must be completed using AP

All nodes must be in the same subnet.

All nodes must be in separate subnets.

A compute manager must be configured.

NSX Manager must reside on a Windows Server.

 Loading...

Page 2 of 4

11. What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?

VLAN Uplink

Downlink interface

Loopback Router Port

Service interface

 Loading...

12. Which two tools are used for centralized logging in VMware NSX? (Choose two.)

Sysloq Server

VMware Aria Automation

VMware Aria Operations for Logs

VMware Aria Operations for Networks

VMware Aria Operations

 Loading...

13. Which is an advantage of an L2 VPN in an NSX 4.x environment?

Achieve better performance

Use the same broadcast domain

Enables Multi-Cloud solutions

Enables VM mobility with re-IP

 Loading...

14. An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.

Which message ID (msgid) should be used in the syslog export configuration command as a filter?

FABRIC

SYSTEM

GROUPING

MONITORING

 Loading...

15. Which command on ESXi is used to verify the Local Control Plane connectivity with Central Control Plane?

esxcli network ip connection list | grep netcpa

esxcli network ip connection list | grep ccpd

esxcli network ip connection list | grep 1234

esxcli network ip connection list | grep 1235

 Loading...

16. Which tool could be used to configure BGP on a Tier-0 Gateway?

ESX CLI

NSX CLI

API

iPerf3

 Loading...

17. When running nsxcli on an ESXi host, which command will show the Replication mode?

get logical-switch status

get logical-switch

get logical-switches

get logical-switch status

 Loading...

18. Which of the following statements is true regarding the use of a Dynamic Routing Protocol on a Tier-1 Gateway?

Both BGP and OSPF can be used on a Tier-1 Gateway.

You can only use OSPF on the Tier-1 Gateway

A Dynamic Routing Protocol cannot be used on a Tier-1 Gateway.

You can only use BGP on the Tier-1 Gateway.

 Loading...

19. Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

HTTPS

SSH

TCP

UDP

SSL

TLS

 Loading...

20. Which of the following settings must be configured in an NSX environment before enabling stateful active-active SNAT?

Tier-1 gateway in active-standby mode

A Punting Traffic Group for the NSX Edge uplinks

An Interface Group for the NSX Edge uplinks

Tier-1 gateway in distributed only mode

 Loading...

Page 3 of 4

21. Which two choices are use cases for Distributed Intrusion Detection? (Choose two.)

Use agentless antivirus with Guest Introspection.

Quarantine workloads based on vulnerabilities.

Identify risk and reputation of accessed websites.

Gain Insight about micro-segmentation traffic flows.

Identify security vulnerabilities in the workloads.

 Loading...

22. Which two are requirements for FQDN Analysis? (Choose two.)

The NSX Edge nodes require access to the Internet to download category and reputation definitions.

ESXi control panel requires access to the Internet to download category and reputation definitions.

The NSX Manager requires access to the Internet to download category and reputation definitions.

A layer 7 gateway firewall rule must be configured on the Tier-1 gateway uplink.

A layer 7 gateway firewall rule must be configured on the Tier-0 gateway uplink.

 Loading...

23. An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.

Which is the correct way to implement this change?

Send an API call to https:///api/vl/cluster/api-certificate?action=set_cluster_certificate&certificate_id=

Send an API call to https:///api/vl/node/services/http?action=apply_certificate&certificate_id=

SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate node install

SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate vip install

 Loading...

24. Which TraceFlow traffic type should an NSX administrator use for validating connectivity between App and DB virtual machines that reside on different segments?

Anycast

Multicast

Broadcast

Unicast

 Loading...

25. Which two of the following features are supported for the Standard NSX Application Platform Deployment? (Choose two.)

NSX Intrusion Detection and Prevention

NSX Intelligence

NSX Network Detection and Response

NSX Malware Prevention Metrics

NSX Intrinsic Security

 Loading...

26. An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router.

What sequence of commands could be used to check this status on NSX Edge node?

- enable - get vrf - show bgp neighbor

- get gateways - vrf - get bgp neighbor

- set vrf - show logical-routers - show bgp

- show logical-routers - get vrf - show ip route bgp

 Loading...

27. What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)

DFW

Tier-1 Gateway

Segment

Segment Port

Group

 Loading...

28. An architect receives a request to apply distributed firewall in a customer environment without making changes to the network and vSphere environment. The architect decides to use Distributed Firewall on VDS.

Which two of the following requirements must be met in the environment? (Choose two.)

vCenter 8.0 and later

NSX version must be 3.2 and later

NSX version must be 3.0 and later

VDS version 6.6.0 and later

 Loading...

29. Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

set timezone

set ntp-server

get timezone

get time-server

 Loading...

30. Which NSX CLI command is used to change the authentication policy for local users?

set hardening-policy

get auth-policy minimum-password-length

set cli-timeout

set auth-policy

 Loading...

Page 4 of 4

31. Which CLI command is used for packet capture on the ESXi Node?

tcpdump

set capture

pktcap-uw

debug

 Loading...

32. Where can an administrator see a visual overview of network connections between different VMs and different networks, within the NSX domain?

Network Intelligence

NSX Intelligence

VMware Aria Operations

VMware Aria Operations for Networks

 Loading...

33. Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

Tier-1 SR Router Port

Tier-0 Uplink interface

Downlink Interface for the Tier-0 DR

Downlink Interface for the Tier-1 DR

Inter-Tier interface on the Tier-0 gateway

 Loading...

34. A company security policy requires all users to log into applications using a centralized authentication system.

Which two authentication, authorization, and accounting (AAA) systems are available when integrating NSX with VMware Identity Manager? (Choose two.)

RSA SecureID

SecureDAP

RADII 2.0

LDAP and OpenLDAP based on Active Directory (AD)

Keygen Enterprise

 Loading...

35. Where in the NSX UI would an administrator set the time attribute for a time-based Gateway Firewall rule?

The option to set time-based rule is a clock Icon in the rule.

The option to set time based rule is a field in the rule Itself.

There Is no option in the NSX U

It must be done via command line interface.

The option to set time-based rule is a clock Icon in the policy.

 Loading...

 Loading...