300-435 Online Dumps Boost Your Career

Category:

Comments:

0 Comments

Post Date:

March 14, 2023

The 300-435 Automating and Programming Cisco Enterprise Solutions (ENAUTO) certification exam is challenging, and it's natural to feel anxious and nervous before taking the exam. Practicing with 300-435 dumps questions can help alleviate this anxiety by boosting your confidence. As you practice and become more familiar with the exam format and content, you'll feel more confident in your abilities, which can help you perform better on the actual 300-435 exam. Practicing with 300-435 questions can increase your chances of success in the certification exam. Practice free Cisco 300-435 exam dumps below.

Page 1 of 4

1. Refer to the exhibit.

The lab group consists of four Cisco IOS XE routers named pod-11, pod-12, and pod-22.

What is the result of running the Ansible playbook to reset the lab?

The IPv4 and IPv6 addresses for the Loopback1 interface are removed from pod-11 and pod-12.

The IPv4 and IPv6 addresses for the Loopback2 interface are removed from all routers.

The Loopback1 interface is removed from the pod-11 and pod-12 routers.

The changes will occur on pod-21 and pod-22 If the loopback2 Interface is absent.

2. In which direction does the Cisco DNA Center Intent API communicate?

westbound

eastbound

northbound

southbound

3. A configuration has been made to add to every switch port a new port description. The script worked initially, but after a few seconds, an HTTP 429 status code was received.

What causes this error message from the Meraki cloud?

The wrong API key is used to query the data.

The rate limit of the Cisco Meraki API is exceeded.

The API key has expired.

The device goes offline while you poll the API dashboard.

4. What is a benefit of developing an application in a Python virtual environment?

The application operates in multiple target systems simultaneously.

The application supports concurrency or multithreading.

The application operates across systems that have different operating systems.

The development environment is isolated from Python projects that already exist.

5. Which tag is required when establishing a YANG-push subscription with a Cisco IOS XE device?

6. DRAG DROP

Drag and drop the characteristics from the left onto the network types on the right.

7. Refer to the exhibit.

Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)

timezone

disableMyMerakiCom

type

tags

organizationId

8. Which curl command is used to update the SNMP community of network ID “1234567” to read-only?

A)

Option A

Option B

Option C

Option D

9. Webhook that are generated by Cisco DNA Center are REST calls with which properties?

JSON payload delivered via PUT

XML payload delivered via POST

JSON payload delivered via POST

XML payload delivered via PUT

10. What is a capability of MV sense MQTT API?

Request and subscribe to historical, current, or real-time data

Automate the configuration of networking device.

Monitor the network and auto adjust for optimal performance

Create email alerts for users that violate the security configuration

Page 2 of 4

11. Refer to the exhibit:

A RESTCONF GET request is sent to a Cisco IOS XE device. A portion of the response is shown in the exhibit.

Which module name corresponds to the YANG model referenced in the request?

left-intergaces:ieft-ipv4

lana-if-type:enthernetCsmacd

left-interface:interfaces

left-interfaces

12. Refer to the exhibit.

Which XML tag completes this NETCONF telemetry subscription with a Cisco IOS XE device?

crontab

cadence

frequency

period

13. Refer to the exhibit.

The configuration commands are entered in CLI config mode to configure a static telemetry subscription on a Cisco IOS XE device. The commands are accepted by the device, but the consumer receives no telemetry data.

Which change must be made to ensure that the consumer receives the telemetry data?

The IP address of the receiver must be set.

The stream type must be set to YAN

The update policy period must be shortened.

The sender IP address must be set.

14. DRAG DROP

Refer to the exhibit.

A GET request is issued to the Cisco DNA Center REST API. Drag and drop the GET request URL subpaths from the left onto the objectives on the right. Not all options are used.

15. Which setting is used for the dampening period when configuring an on-change publication for YANG-push versus Openconfig?

Null

-1

1000

16. Which two Cisco DNA center features are needs to add legancy on the platform? (Choose two.)

Multivendor SDK support

Trusted device profile update

Device package creation

Device package download

Device profile replication

17. DRAG DROP

A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch.

Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.

18. DRAG DROP

Drag and drop the code from the bottom onto the box where the code is missing to perform the login operation and security check on the vManage web server at the specified IP address. Not all code options are used.

19. 1.Which two API calls are used to trigger a device configuration sync in Cisco DNA Center? (Choose two.)

PUT /dna/intent/api/v1/network-device

PUT /dna/intent/api/v1/network-device/sync-all

PUT /dna/intent/api/v1/network-device/{networkDeviceId}/sync

PUT /dna/intent/api/v1/network-device/sync

POST /dna/intent/api/v1/network-device/{networkDeviceId}/sync

20. An engineer stored source code in a Git repository and is ready to develop a new feature. The production release is stored in the "master" branch.

Which command create the new feature in a separate branch called "feature" and check out the new version?

Option A

Option B

Option C

Option D

Page 3 of 4

21. Which Python snippet receives a Meraki webhook request?

A)

Option A

Option B

Option C

Option D

22. What does the command boot ipxe forever switch 1 perform when executed on a Cisco IOS XE device?

It continuously sends DHCP requests for iPXE until the device boots with an image.

It continuously sends DNS requests for iPXE until the device restarts.

It continuously sends DNS requests for iPXE until the device boots with an image.

It continuously sends DHCP requests for iPXE until the device restarts.

23. Refer to the exhibit.

Which device type is functioning in a degraded state?

access point

distribution switch

access switch

wireless LAN controller

24. What is a capability of Cisco SD-WAN vManage Certificate Management API?

deletes existing installed certificates

distributes the root certificate to client devices

generates SSL certificates

creates certificate signing requests

25. With the MV Sense API, which REST endpoint provides LUX level?

/merakimv/XXXX-XXXX-XXXX/light

/merakimv/XXXX-XXXX-XXXX/raw_detections

/merakimv/XXXX-XXXX-XXXX/0

/merakimv/XXXX-XXXX-XXXX/zones

26. CORRECT TEXT

Fill in the blank to complete the URL for the Cisco SD-WAN API that retrieves a list of users that are logged into a device.

27. A new project called “device_status” must be stored in a central Git repository called “device_status” with the first file named “device_status.py”. The Git repository is created using the account python_programmer.

Which set of commands inserts the project into Git?

A)

Option A

Option B

Option C

Option D

28. DRAG DROP

Drag and drop the code from the bottom onto the box where the code is missing to construct a Python script to automate the process of updating the site-to-site VPN settings of the network. Not all options are used.

29. Refer to the exhibit.

Which ncclient method is used to collect the running configuration of a Cisco IOS XE device that uses NETCONF?

config=m.copy_config(source=’running’)

config=m.get(source=’running’)

config=m.collect_config(source=’running’)

config=m.get_config(source=’running’)

30. Which script binds a network to a template?

A)

Option A

Option B

Option C

Option D

Page 4 of 4

31. What are two benefits of leveraging Ansible for automation of Cisco IOS XE Software? (Choose two.)

Ansible playbooks are packaged and installed on IOS XE devices for automatic execution when an IOS device reboots.

All IOS XE operating systems include Ansible playbooks for basic system administration tasks.

It is a device-independent method for automation and can be used with any type of device or operating system.

Ansible playbooks can be written from the IOS XE EXEC command line to configure the device itself.

It does not require any modules of software except SSH to be loaded on the network device.

32. When a Grafana dashboard is built to receive network events from Cisco DNA Center, which integration bundle is enabled to send notifications?

Basic ITSM CMDB Synchronization

DNA Center Rest API

Network Events for REST API Endpoint

Network Issue Monitor and Enrichment for ITSM

33. DRAG DROP

Drag and drop the code snippets from the bottom onto the blanks in the code to create a network for a new Cisco Meraki organization. Not all option are used?

34. Refer to the exhibit.

Interfaces named Loopback0, Loopback1, and Loopback2 must be created and enabled on a Cisco IOS XE target device in the lab group.

Which loop must be added to the end of the Ansible “create int” task?

with_items: “{{intlist}}”

with_parent: “{{intlist}}”

with_list: “{{intlist}}”

with_groups: “{{intlist}}”

35. What is the purpose of using the Cisco SD-WAN vManage Certificate Management API?

To securely deploy vManage

To contact Enterprise certificate Authority

To install signed certificates

To report an issue to cisco TAC

36. Which path do call begin with to implement Cisco DNA Center Intent APIs?

/intent

/dna/v1

/dna/api/intent/v1

/dna/system/api/v1/

37. Refer to the exhibit.

The task is to create a Python script to display an alert message when a Meraki MX Security Appliance goes down. The exhibit shows sample data that is received.

Which Python snippet displays the device name and the time at which the switch went down?

A)

Option A

Option B

Option C

Option D

38. Refer to the exhibit.

End users cannot connect to the circular network, and the signal strength is poor. A missing or unknown APN status message is present and the modern status remains in low-power mode.

Which addresses the issue?

Use the device/celluiar/status vManage resource URI to ensure sufficient radio signal strength.

Use the systen/device/controllers vManage resource URI to set the platform temperature.

Use the device/app-route/statistics vManage resource URI to allow packets reachability to hosts.

Use the device/tools'ping vManage resource URI to allow network device reachability.

TAGS:

300-435, 300-435 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get 300-435 Dumps Full Version

Q&As: 124
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

300-435 Online Dumps Boost Your Career

Related

Posts

100-160 Dumps Guarantee You Pass 100-160 Exam Easily

Pass 300-815 Exam to Get Cisco Certification

Test Online 300-445 Dumps Questions to Be Certified

Improve Your Knowledge with 300-540 Exam Dumps

About Us

EMAIL

Services

Opening Hours