MB-320 Dumps Questions – Effective Way to Get Certified

1. ) Activate the production flow

Does the solution meet the goal?

2. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.

You need to create a subcontracting activity for the painting service.

Solution:

• Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service.

• Create a vendor resource then create a work cell fcr outsourced painting and add the resource to the work cell.

• Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity.

• Create a service term to tie the purchase agreement to the activity.

Does the solution meet the goal?

3. HOTSPOT

You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.

You need to set up a new item for the car audio system.

How should you create the new product? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

4. A company uses Dynamics 365 for Finance and Operations for Process manufacturing.

You are reviewing the planned production orders for the next two weeks. There are several production orders for the same product One order is scheduled to run the week after another order.

You need to optimize the planned production orders.

What should you do?

5. You are responsible for product and formula maintenance for a paint manufacturer.

You create a formula for white paint and add its lines. When the formula size increases or an ingredient

changes, the quantity of the pigment ingredient must be adjusted proportionately.

You need to set up the formula line for the pigment.

Which formula feature should you use?

6. HOTSPOT

A manufacturing company uses Dynamics 365 Supply Cham Management.

The company identifies a bill of materials (BOM) item that needs to be recalled for a product

The engineering department needs to link customer support incidents and knowledgebase articles related to the product change.

Other items affected by this change must reference the same support incidents and knowledgebase articles.

You need to recommend features to facilitate this business process.

Which features should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

7. A company produces multiple products that require an installation kit that includes 50 components.

The company does not want to include these 50 components in every Bill of materials (BOM). You have a BOM kit that includes all 50 components, but you do not want it to produce a separate production order.

You need to set up the product BOM for the finished good.

What should you do?

8. DRAG DROP

A manufacturer sends wiring harnesses to a vendor to be soldered to a connector. You have created the subcontracting process in the bill of materials (BOM) and route to account for the items sent to the vendor.

You create separate subcontracting purchase orders to account for the service. You attempt to add the service item to the BOM. The system generates an error.

You need to set up a new item model group for the service item.

Which three actions should you perform? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

9. HOTSPOT

A company implements Dynamics 365 for Finance and Operations.

Production orders are generated for products directly from projects. You create the following production order:





Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

10. A customer produces light projection toys for holiday decorations throughout the year. The production process creates the projections toy at the following work cells stands, main assembly, electric, visuals, and packaging.

Vendors must create visual templates for the company for each season. They must manage the transfer of visual templates to the warehouse. Each transfer for each vendor must use the same purchase agreement.

You need to configure the subcontracted transfer activity.

What should you do?

11. DRAG DROP

A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the sample sub assembly item and resource sanding process.

You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce.

You must make a permanent change to the number of units the resource can produce for

all future orders.

You need to adjust the process quantity on the route operation.

Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions to the answer area and arrange them in the correct order.

12. DRAG DROP

A company implements Dynamic 365 for Finance and Operations. You run the latest master plan. You observe invalid results.

You need to set up tracing for the master plan.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

13. A company that makes artisan chocolate is implementing Dynamics 365 Supply Chain Management.

To safeguard the quality of its ingredients, the company limits recipe substitutions of its chocolates.

its top-selling chocolate bar must contain 20 percent sugar. The sugar can be Obtained from either cane or beet sugar depending on supply at the time of production.

The system must be able to automatically substitute the appropriate sugar items when generating production orders to meet the quality level of sugar even when the preferred concentration of cane sugar is out of stock.

You need to configure the system.

Which three components must you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

14. A manufacturing company uses time and attendance in Dynamics 365 Supply Chain Management.

The company requires that employees register time against each machine on the shop floor.

You need to configure the system so that employees can register time.

Which two configurations must be set up? Each answer represents a partial solution. NOTE: Each correct selection is worth one point.

15. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

Product is sold by the box and priced by the pound.

You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer.

Solution: Set up the product with a sales unit measure of pounds and inventory unit measure of box. Set a standard unit conversation for the product from box to pounds.

Does the solution meet the goal?

16. A company produces homeopathic lotions for pain relief. The lotions use a combination of ProductA and ProductB. ProductA is the primary ingredient. You use ProductB to adjust the concentration of active ingredients in the lotion.

You need to ensure that the lotion final product has a consistent concentration of anti-inflammatory agents.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

17. HOTSPOT

You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.

You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.

You need to schedule the order.

Which scheduling parameters should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

18. DRAG DROP

You are the product design manager for a computer manufacturer.

Your new laptop model is configurable. There are restrictions on which hardware components can be selected depending on the model. You create configuration groups for hardware and software.

You need to create a new laptop item number and configurations.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

19. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company uses Dynamics 365 Supply Chain Management to manage production configuration.

A product designer creates a remote control toy that can be purchased with different tire sizes.

Sales representatives need to perform product configuration for the custom tire variants when they create a new order.

Solution: Select the custom tire size when filling out the item requirement line.

Does the solution meet the goal?

20. HOTSPOT

A manufacturing company uses license plates for inventory tracking of all materials. Part M92020 is stored with 30 units for each license plate. You create a production order that indicates one unit of part M9202 and release the order for picking. There is no inventory currently available in the production input location.

The warehouse fast-tab setup for part M92020 is shown below.





Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

21. A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient In the lotion. Ingredients is used as a compensating ingredient.

You need to ensure that the system is set up to support the manufacturing process.

Solution: Set up the batch attributes for a minimum value, a maximum value, and a target level for the filler ingredients.

Does the solution meet the goal?

22. HOTSPOT

You are a production supervisor for a process manufacturing company. Item F0001 is the primary source of consumption for item C0001.

Item C0001 has a non-linear consumption pattern. Consumption changes based on varying batch sizes:





You need to update the formula for F0001 to reflect the step consumption of C0001.

How should you configure the formula? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

23. You have a product that can be manufactured on two different production lines in the same warehouse. You create resources and then create individual input locations for the resources. You create two routes. Each route uses different resources.

Materials are staged for consumption in different locations based on the resources being utilized for production.

You need to set up the formula to consume the goods from the correct line-side location.

What should you do?

24. HOTSPOT

A company plans to implement routing and route postings.

You must direct postings of route cards based upon the route groups at Report as finished.

You set the start default order setting for route posting to Never and the Report as finished setting to Route Group Dependent.

You set up the route group as shown below.





Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

25. ) Edit the existing Kanban rule. Set the expiration date to the end of the month. Specify the new Kanban rules as the replacement rule

Does the solution meet the goal?

26. A customer produces light projection toys for holiday decorations throughout the year. Vendors have

negotiated rebate agreements as a condition of their contact. The contract also contains the visual templates required for the customer to use in a season.

Vendor rebate agreements must only be applied if the following requirements are met:

Units of measure for deliverables are the same unit of measure as on the agreement

The agreement is valid as of the date a purchase order is generated

You need to configure the vendor rebate agreements.

What should you do?

27. DRAG DROP

A pharmaceutical manufacturer uses Process manufacturing.

You are consolidating planned batch orders for a specific medication. The order must cover two weeks of demand. No other items need to be consolidated.

You need to change the coverage group of the items.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

28. HOTSPOT

A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations.

You have been provided the following information for a new relieving lotion.









Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

29. You are the production supervisor at a chemical processing plant. You must track attributes for each batch of chemicals. Automated quality orders must be generated when a batch order for these chemicals is reported as finished.

You need to ensure that the values of attributes are updated and tracked.

What three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

30. A chemical manufacturing company uses Dynamics 365 for Finance and Operations. A batch of material has a quality issue and must be reworked.

You need to create the rework order the production.

Which three options must be set? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

31. A manufacturing company is implementing Dynamics 365 for Finance and Operations. The company uses a standard costing model to value inventory.

During the setup of the system, all areas that impact the standard cost of the item must be configured correctly to calculate a complete standard cost by using routing, Bill of materials (BOM) and overhead burden.

You need to verify that all areas of the system are correctly configured.

Which object does NOT impact the standard cost of manufactured items?

32. DRAG DROP

A company plans to account for indirect costs related to materials used to manufacture products.

The items used to manufacture products have surcharge rates that depend on the type of product being used.

You need to set up the costing sheet to include surcharges for specific items.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

33. A company produces and distributes seafood to supermarkets. During the manufacturing process, raw seafood is purchased, cleaned, and packaged into various-sized boxes. Each box may have a different weight.

Product is sold by the box and priced by the pound.

You need to ensure that you can perform transactions at the box level and record the net weight of goods shipped to a customer.

Solution: Set up a unit sequence group on the item for both pounds and boxes, then set a standard unit conversion for the product from box to pounds.

Does the solution meet the goal?

34. CORRECT TEXT

You are a functional consultant for Contoso Entertainment System USA (USMF).

You need to create a calendar for USMF that uses factory shifts of 06:00 to 14:00 from Monday to Friday.

To complete this task, sign in to Dynamics 365 portal. You must complete Task 1 before completing this task. Task 1 is the creation of the working time template.

35. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing company has a new speaker that is available with standard and premium carbon fiber options.

For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices.

You need to create and configure the product and pricing for the new speaker.

Solution: Create a constraint-based product master with variants. Use the trade agreements to specify the different pricing.

Does the solution meet the goal?

36. A company sells large batches of chemicals. Item specifications vary from batch to batch.

You must fulfill multiple orders from the same batch of chemicals. If a single batch cannot be reserved, manual reservation must be used. The system must also make reservations based on the earliest batch receipt date.

You need to set up a new chemical item that automatically uses the new batch reservation logic.

Which three settings should you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

37. DRAG DROP

You are the production supervisor at a manufacturing company. You are in the process of configuring the production control module and its parameters.

A company plans to use manufacturing execution. Bill of materials (BOM) item consumption must be generated when items are reported at the operation level.

You need to configure the Manufacturing execution production order defaults form to allow for back flushing on operations.

How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

38. DRAG DROP

A company that uses Lean manufacturing concepts to produce paper plates has redesigned the layout of the warehouse and production floor.

The company’s production flow activities no longer match the tasks of the workers.

Employees use paper and manual communication to complete the tasks.

You need to update the production flows to match their current processes by deactivating the obsolete production flows and creating new ones.

Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

39. HOTSPOT

A company implements Dynamics 365 for Finance and Operations. You must use functionality in the system for group production runs to prevent downtime and excessive cleaning of the machines on the production line.

You need to set up the system.

Which behaviors should you expect? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.