Test Online MS-500 Dumps Questions to Be Certified

1. You have a Microsoft 365 subscription.

You need to enable auditing for all Microsoft Exchange Online users.

What should you do?

2. You configure several Advanced Threat Protection (ATP) policies in a Microsoft 365

subscription.

You need to allow a user named User1 to view ATP reports in the Threat management dashboard.

Which role provides User1with the required role permissions?

3. HOTSPOT

You have a Microsoft 365 E5 subscription that contains two groups named Group1 and Group2 and the users shown in the following table.





You have the Privileged Access settings configured as shown in the following exhibit.





You have a privileged access policy that has the following settings:

• Policy name: New Transport Rule

• Policy type: Task

• Policy scope Exchange

• Approval Type: Manual

• Approver group: Group 1

User1 requests access to the New Transport Rule policy for a duration of two hours.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

4. HOTSPOT

You have a Microsoft 365 ES subscription linked to an Azure Active Directory (Azure AD) tenant. The tenant contains a user named User1 and multiple Windows 10

devices. The deuces are Azure AD joined and protected by using BitLocker Drive Encryption (BitLocker).

You need to ensure that User1 can perform tip following actions:

✑ View BitLocker recovery keys.

✑ Configure the usage location for the users in tenant. The solution must use the principle of least privilege.

Which two roles should you assign to User' in the Microsoft 365 admin center? To answer, select the appropriate roles in the answer area. Each correct selection is one point.

5. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 subscription that contains 1,000 user mailboxes.

An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.

You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending email messages as User5.

Solution: You modify the permissions of the mailbox of User5, and then create an eDiscovery case.

Does this meet the goal?

6. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: &=Q8v@2qGzYz

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11032396

You need to create a case that prevents the members of a group named Operations from deleting email messages that contain the word IPO.

To complete this task, sign in to the Microsoft Office 365 admin center.

7. You haw a Microsoft 365 subscription that contains the users shown in the following table.





You need to ensure that User1, User2, and User3 can use self-service password reset (SSPR). The solution must not affect User 4.

Solution: You enable SSPR for Group1.

Does this meet the goal?

8. DRAG DROP

You have a Microsoft 365 E5 tenant that contains three users named User1, User2, and User3.

You need to assign roles or role groups to the users as shown in the following table.





What should you use to assign a role or role group to each user? To answer, drag the appropriate tools to the correct roles or role groups. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

9. You have a Microsoft 365 subscription named contofco.com

You need to configure Microsoft OneDrive for Business external sharing to meet the following requirements:

• Enable flic sharing for users that rave a Microsoft account

• Block file sharing for anonymous users.

What should you do?

10. An administrator configures Azure AD Privileged Identity Management as shown in the following exhibit.





What should you do to meet the security requirements?

11. You have a Microsoft 365 E5 subscription that contains a user named User1.

The Azure Active Directory (Azure AD) Identity Protection risky users report identifies User1.

For User1, you select Confirm user compromised.

User1 can still sign in.

You need to prevent User1 from signing in. The solution must minimize the impact on users at a tower risk level.

Solution: From the Access settings, you select Block access for User1.

Does this meet the goal?

12. Your company has a main office and a Microsoft 365 subscription.

You need to enforce Microsoft Azure Multi-Factor Authentication (MFA) by using conditional access for all users who are NOT physically present in the office.

What should you include in the configuration?

13. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an on-premises Active Directory domain named contoso.com.

You install and run Azure AD Connect on a server named Server1 that runs Windows Server.

You need to view Azure AD Connect events.

You use the System event log on Server1.

Does that meet the goal?

14. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 subscription that contains the users shown in the following table.





You discover that all the users in the subscription can access Compliance Manager reports.

The Compliance Manager Reader role is not assigned to any users.

You need to recommend a solution to prevent a user named User5 from accessing the Compliance Manager reports.

Solution: You recommend assigning the Compliance Manager Reader role to User1.

Does this meet the goal?

15. You have a Microsoft 365 subscription.

You need to be notified by email whenever an administrator starts an eDiscovery search.

What should you do from the Microsoft Purview compliance portal?

16. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: #HSP.ug?$p6un

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11122308





































You need to ensure that a user named Allan Deyoung uses multi-factor authentication (MFA) for all authentication requests.

To complete this task, sign in to the Microsoft 365 admin center.

17. You have a Microsoft 365 E5 subscription.

You plan to create a conditional access policy named Policy1.

You need to be able to use the sign-in risk level condition in Policy1.

What should you do first?

18. You have a Microsoft 365 E5 subscription.

You create a sensitivity label named Label 1 and publish Label1 to all users and groups.

You have the following files on a computer:

• File1.doc

• File2.docx

• File3.xlsx

• File4.txt

You need to identify which files can have Label1 applied.

Which files should you identify?

19. You have a Microsoft 365 subscription.

You need to recommend a passwordless authentication solution that uses biometric authentication.

What should you include in the recommendation?

20. Your network contains an on-premises Active Directory domain.

The domain contains the servers shown in the following table.





You plan to implement Microsoft Defender for Identity for the domain. You install a Microsoft Defender for Identity standalone sensor on Server 1. You need to monitor the domain by using Microsoft Defender for Identity.

What should you do?

21. HOTSPOT

You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.





You register devices in contoso.com as shown in the following table.





You create app protection policies in Intune as shown in the following table.





For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

22. You have a Microsoft 365 E5 subscription that has Microsoft 365 Defender enabled.

You plan to deploy a third-party app named App1 that will receive alert data from Microsoft 365 Defender.

Which format will Microsoft 365 Defender use to send the alert data to App1?

23. You have a Microsoft 365 E5 subscription that contains a Microsoft SharePoint Online site named Site1 and the data loss prevention (DIP) policies in following table.





The DLP rules are configured as shown in the following table.





All the policies are assigned to Site1.

You need to ensure that if a user uploads a document to Site1 that matches all the rules, the user will be shown the Tip 2 policy tip.

What should you do?

24. You have a Microsoft 365 subscription.

You create and run a content search from the Security & Compliance admin center.

You need to download the results of the content search.

What should you obtain first?

25. DRAG DROP

You have an on-premises Hyper-V infrastructure that contains the following:

✑ An Active Directory domain

✑ A domain controller named Server1

✑ A member server named Server2

A security policy specifies that Server1 cannot connect to the Internet. Server2 can connect to the Internet.

You need to implement Azure Advanced Threat Protection (ATP) to monitor the security of the domain.

What should you configure on each server? To answer, drag the appropriate components to the correct servers. Each component may only be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.





7

26. HOTSPOT

You have a Microsoft 365 E5 subscription.

Users and device objects are added and removed daily. Users in the sales department frequently change their device.

You need to create three following groups:





The solution must minimize administrative effort.

What is the minimum number of groups you should create for each type of membership? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

27. You have a Microsoft 365 subscription.

Your company uses Jamf Pro to manage macOS devices.

You plan to create device compliance policies for the macOS devices based on the Jamf Pro data.

You need to connect Microsoft Endpoint Manager to Jamf Pro.

What should you do first?

28. You have a Microsoft 365 subscription.

You create an Advanced Threat Protection (ATP) safe attachments policy.

You need to configure the retention duration for the attachments in quarantine.

Which type of threat management policy should you create?

29. CORRECT TEXT

You need to ensure that a user named Grady Archie can monitor the service health of your Microsoft 365 tenant. The solution must use the principle of least privilege.

To complete this task, sign in to the Microsoft 365 portal.

30. You need to enable and configure Microsoft Defender for Endpoint to meet the security requirements.

What should you do?

31. HOTSPOT

You have a Microsoft 365 subscription that uses a default name of litwareinc.com.

You configure the Sharing settings in Microsoft OneDrive as shown in the following exhibit.









Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

32. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 subscription that contains the users shown in the following table.





You discover that all the users in the subscription can access Compliance Manager reports.

The Compliance Manager Reader role is not assigned to any users.

You need to recommend a solution to prevent a user named User5 from accessing the Compliance Manager reports.

Solution: You recommend removing User1 from the Compliance Manager Contributor role.

Does that meet the goal?

33. You have a Microsoft 365 subscription for a company named Contoso, Ltd. All data is in Microsoft 365.

Contoso works with a partner company named Litware, Inc. Litware has a Microsoft 365 subscription.

You need to allow users at Contoso to share files from Microsoft OneDrive to specific users at Litware.

Which two actions should you perform from the OneDrive admin center? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

34. HOTSPOT

You install Azure ATP sensors on domain controllers.

You add a member to the Domain Admins group. You view the timeline in Azure ATP and discover that information regarding the membership change is missing.

You need to meet the security requirements for Azure ATP reporting.

What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

35. DRAG DROP

Your company has two departments named department and department2 and a Microsoft 365 E5 subscription.

You need to prevent communication between the users in department1 and the users in department2.

How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

36. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: #HSP.ug?$p6un

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11122308





































You need to create an eDiscovery case that places a hold on the mailbox of a user named Allan Deyoung. The hold must retain email messages that have a subject containing the word merger or the word Contoso.

To complete this task, sign in to the Microsoft 365 admin center.

37. CORRECT TEXT

Your company plans to merge with another company.

A user named Debra Berger is an executive at your company.

You need to provide Debra Berger with all the email content of a user named Alex Wilber that contains the word merger.

To complete this task, sign in to the Microsoft 365 portal.

38. You have a Microsoft 365 subscription and a Microsoft Defender Advanced Threat Protection (Microsoft Defender ATP) subscription.

You have devices enrolled in Microsoft Endpoint Manager as shown in the following table:





You integrate Microsoft Defender ATP and Endpoint Manager.

You plan to evaluate the Microsoft Defender ATP risk level for the devices.

You need to identify which devices can be evaluated.

Which devices should you identify?

39. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 tenant. You create a label named CompanyConfidential in Microsoft Azure Information Protection.

You add CompanyConfidential to a global policy.

A user protects an email message by using CompanyConfidential and sends the label to several external recipients. The external recipients report that they cannot open the email message.

You need to ensure that the external recipients can open protected email messages sent to them.

Solution: You modify the content expiration settings of the label.

Does this meet the goal?

40. You have a Microsoft 365 subscription that uses a default domain name of fabrikam.com.

You create a safe links policy, as shown in the following exhibit.





Which URL can a user safely access from Microsoft Word Online?

41. You have a Microsoft 365 subscription that contains a user named Use1. You need to ensure that User1 can review Conditional Access policies.

Solution: You assign User1 the Application Administrator role.

Does this meet goal?

42. DRAG DROP

You have an Azure subscription and a Microsoft 365 subscription.

You need to perform the following actions:

✑ Deploy Azure Sentinel.

✑ Collect the Microsoft 365 activity log by using Azure Sentinel.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

43. You have a Microsoft 365 subscription that contains 1,000 user mailboxes.

An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.

You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending User5.

Solution: You start a message trace, and then create a Data Subject request (DSR) case.

Does this meet the goal?

44. CORRECT TEXT

You need to ensure that unmanaged mobile devices are quarantined when the devices attempt to connect to Exchange Online.

To complete this task, sign in to the Microsoft 365 portal.

45. HOTSPOT

You have a Microsoft Sentinel workspace that has an Azure Active Directory (Azure AD) connector and an Office 365 connector.

From the workspace, you plan to create an analytics rule that will be based on a custom query and will run a security play.

You need to ensure that you can add the security playbook and the custom query to the rule.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

46. Your network contains an on-premises Active Directory domain and a Microsoft 365 subscription.

You plan to deploy a hybrid Azure Active Directory (Azure AD) tenant that has Azure AD Identity Protection risk policies enabled.

You need to configure Azure AD Connect to support the planned deployment.

Which Azure AD Connect authentication method should you select?

47. You have a Microsoft 365 subscription.

You create a supervision policy named Policy1, and you designate a user named User1 as the reviewer.

What should User1 use to view supervised communications?

48. You have an Azure Sentinel workspace that has an Azure Active Directory (Azure AD) connector and an Office 365 connector.

From the workspace, you plan to create a scheduled query rule that will use a custom query. The rule will be used to generate alerts when inbound access to Office 365 from specific user accounts is detected.

You need to ensure that when multiple alerts are generated by the rule, the alerts are consolidated as a single incident per user account.

What should you do?

49. You have a Microsoft 365 subscription.

Some users access Microsoft SharePoint Online from unmanaged devices.

You need to prevent the users from downloading, printing, and synching files.

What should you do?

50. You create a data loss prevention (DLP) policy as shown in the following shown:





What is the effect of the policy when a user attempts to send an email messages that contains sensitive information?

51. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: #HSP.ug?$p6un

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11122308





































You need to ensure that all the email messages in the mailbox of a user named Allan Deyoung are retained for a period of 90 days, even if the messages are deleted.

To complete this task, sign in to the Microsoft 365 admin center.

52. You have a Microsoft 365 E5 subscription that uses Microsoft Teams and contains a user named User1.

You configure information barriers.

You need to identify which information barrier policies apply to User1.

Which cmdlet should you use?

53. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 subscription.

You have a user named User1. Several users have full access to the mailbox of User1.

Some email messages sent to User1 appear to have been read and deleted before the user viewed them.

When you search the audit log in Security & Compliance to identify who signed in to the mailbox of User1, the results are blank.

You need to ensure that you can view future sign-ins to the mailbox of User1.

You run the Set-AdminAuditLogConfig -AdminAuditLogEnabled $true

-AdminAuditLogCmdlets *Mailbox* command.

Does that meet the goal?

54. HOTSPOT

You have a Microsoft 365 subscription that contains the users shown in the following table.





You implement Azure Active Directory (Azure AD) Privileged Identity Management (PIM).

From PIM, you review the Application Administrator role and discover the users shown in the following table.





The Application Administrator role is configured to use the following settings in PIM:

✑ Maximum activation duration: 1 hour

✑ Notifications: Disable

✑ Incident/Request ticket: Disable

✑ Multi-Factor Authentication: Disable

✑ Require approval: Enable

✑ Selected approver: No results

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

55. You have a Microsoft 365 subscription that contains a user named User1.

You plan to use Compliance Manager.

You need to ensure that User1 can assign Compliance Manager roles to users. The solution must use the principle of least privilege.

Which role should you assign to User1?

56. HOTSPOT

You have a Microsoft 365 subscription.

You configure Microsoft Defender for Endpoint as shown in the following table.





You onboard devices to Microsoft Defender for Endpoint as shown in the following table.





Microsoft Defender for Endpoint contains the incidents shown in the following table.





For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

57. You have a Microsoft 365 subscription.

All computers run Windows 10 Enterprise and are managed by using Microsoft Intune.

You plan to view only security-related Windows telemetry data.

You need to ensure that only Windows security data is sent to Microsoft.

What should you create from the Intune admin center?

58. You have a Microsoft 365 subscription that contains 1,000 user mailboxes.

An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.

You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending User5.

Solution: You assign the eDiscovery Manager role to Admin1, and then create an eDiscovery case.

Does this meet the goal?

59. You have a Microsoft 365 E5 subscription that has Microsoft Defender for Office 365 enabled.

You need to review the zero-hour auto purge (ZAP) configuration for the subscription.

Which two threat policies should you review? Each correct answer presents part of the solution NOTE: Each correct selection is worth one point,

60. You have a Microsoft 365 E5 subscription.

You implement Advanced Threat Protection (ATP) safe attachments policies for all users.

User reports that email messages containing attachments take longer than expected to be received.

You need to reduce the amount of time it takes to receive email messages that contain attachments. The solution must ensure that all attachments are scanned for malware. Attachments that have malware must be blocked.

What should you do from ATP?

61. HOTSPOT

You have a Microsoft Defender for Endpoint deployment that has custom network indicators turned on.

Microsoft Defender for Endpoint protects two computers that run Windows 10 as shown in the following table.





Microsoft Defender foe Endpoint has the device groups shown in the following table.

62. HOTSPOT

You have a Microsoft 365 E5 subscription that contains a security group named Group1 and the users shown in the following table.





You assign the Compliance Manager roles to the users as shown in the following table.





You add two assessments to Compliance Manager as shown in the following exhibit.





For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

63. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 subscription that contains the users shown in the following table.





You discover that all the users in the subscription can access Compliance Manager reports.

The Compliance Manager Reader role is not assigned to any users.

You need to recommend a solution to prevent a user named User5 from accessing the Compliance Manager reports.

Solution: You recommend assigning the Compliance Manager Reader role to User5.

Does this meet the goal?

64. CORRECT TEXT

You need to ensure that administrators can publish a label that adds a footer to email messages and documents.

To complete this task, sign in to the Microsoft Office 365 portal.

65. You have a Microsoft 365 subscription.

A user reports that changes were made to several files in Microsoft OneDrive.

You need to identify which files were modified by which users in the user’s OneDrive.

What should you do?

66. Note: This question is part of series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 E5 subscription that is associated to a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com.

You use Active Directory Federation Services (AD FS) to federate on-premises Active Directory and the tenant.

Azure AD Connect has the following settings:

✑ Source Anchor: objectGUID

✑ Password Hash Synchronization: Disabled

✑ Password writeback: Disabled

✑ Directory extension attribute sync: Disabled

✑ Azure AD app and attribute filtering: Disabled

✑ Exchange hybrid deployment: Disabled

✑ User writeback: Disabled

You need to ensure that you can use leaked credentials detection in Azure AD Identity Protection.

Solution: You modify the Azure AD app and attribute filtering settings.

Does that meet the goal?

67. DRAG DROP

You have a Microsoft 365 subscription.

You have a site collection named SiteCollection1 that contains a site named Site2. Site2 contains a document library named Customers.

Customers contains a document named Litware.docx. You need to remove Litware.docx permanently.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

68. You have a Microsoft 365 subscription.

You need to ensure that users can manually designate which content will be subject to data loss prevention (DLP) policies.

What should you create first?

69. HOTSPOT

Your network contains an on-premises Active Directory domain that syncs to Azure Active Directory (Azure AD) as shown in the following exhibit.





The synchronization schedule is configured as shown in the following exhibit.





Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.

70. You create an Azure Sentinel workspace.

You configure Azure Sentinel to ingest data from Azure Active Directory (Azure AD).

In the Azure Active Directory admin center, you discover Azure AD Identity Protection alerts.

The Azure Sentinel workspace shows the status as shown in the following exhibit.





In Azure Log Analytics, you can see Azure AD data in the Azure Sentinel workspace.

What should you configure in Azure Sentinel to ensure that incidents are created for detected threats?

71. HOTSPOT

You have a Microsoft 365 E5 subscription that uses Microsoft Endpoint Manager.

The Compliance policy settings are configured as shown in the following exhibit.





On February 25, 2020, you create the device compliance policies shown in the following table.





On March 1. 2020, users enroll Windows 10 devices in Microsoft Endpoint Manager as shown in the following table





For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

72. Topic 3, Contoso, Ltd



Overview

Contoso, Ltd. is a consulting company that has a main office in Montreal and three branch offices in Seattle, and New York.



The company has the offices shown in the following table.







Contoso has IT, human resources (HR), legal, marketing, and finance departments.

Contoso uses Microsoft 365.



Existing Environment

Infrastructure

The network contains an Active Directory domain named contoso.com that is synced to a Microsoft Azure Active Directory (Azure AD) tenant. Password writeback is enabled.

The domain contains servers that run Windows Server 2016. The domain contains laptops and desktop computers that run Windows 10 Enterprise.

Each client computer has a single volume.

Each office connects to the Internet by using a NAT device.

The offices have the IP addresses shown in the following table.





Named locations are defined in Azure AD as shown in the following table.







From the Multi-Factor Authentication page, an address space of 198.35.3.0/24 is defined in the trusted IPs list.

Azure Multi-Factor Authentication (MFA) is enabled for the users in the finance department.

The tenant contains the users shown in the following table.







The tenant contains the groups shown in the following table.







Customer Lockbox is enabled in Microsoft 365.



Microsoft Intune Configuration

The devices enrolled in Intune are configured as shown in the following table.





The device compliance policies in Intune are configured as shown in the following table.





The device compliance policies have the assignments shown in the following table.





The Mark devices with no compliance policy assigned as setting is set to Compliant.



Requirements

Technical Requirements

Contoso identifies the following technical requirements:

✑ Use the principle of least privilege

✑ Enable User1 to assign the Reports reader role to users

✑ Ensure that User6 approves Customer Lockbox requests as quickly aspossible

✑ Ensure that User9 can implement Azure AD Privileged Identity Management



HOTSPOT

Which users are members of ADGroup1 and ADGroup2? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

73. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an on-premises Active Directory domain named contoso.com.

You install and run Azure AD Connect on a server named Server1 that runs Windows Server.

You need to view Azure AD Connect events.

You use the Directory Service event log on Server1.

Does that meet the goal?

74. HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a VPN server named VPN1 that runs Windows Server 2016 and has the Remote Access server role installed.

You have a Microsoft Azure subscription.

You are deploying Azure Advanced Threat Protection (ATP)

You install an Azure ATP standalone sensor on a server named Server1 that runs Windows Server 2016.

You need to integrate the VPN and Azure ATP.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

75. You recently created and published several labels policies in a Microsoft 365 subscription.

You need to view which labels were applied by users manually and which labels were applied automatically.

What should you do from the Security & Compliance admin center?

76. You have a Microsoft 365 subscription.

You create an Advanced Threat Protection (ATP) safe attachments policy to quarantine malware.

You need to configure the retention duration for the attachments in quarantine.

Which type of threat management policy should you create from the Security&Compliance admin center?

77. HOTSPOT

Which policies apply to which devices? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

78. You have a Microsoft 365 E5 subscription that contains the users shown in the following table.





You enable Customer Lockbox.

Which users will be notified when a Microsoft support engineer requests access to the organization?

79. You have an Azure Active Directory (Azure AD) tenant that has a Microsoft 365 subscription You recently configured the tenant to require multi factor authentication (MFA) for risky sign ins You need to review the users who required MFA.

What should you do?

80. You have a hybrid deployment of Azure Active Directory (Azure AD) that contains two users named User1 and User2.

You need to assign Role Based Access Control (RBAC) roles to User1 and User2 to meet the following requirements:

✑ Use the principle of least privilege

✑ Enable User1 to view sync errors by using Azure AD Connect Health

✑ Enable User2 to configure Azure Active Directory Connect Health Settings

Which two roles should you assign?

81. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: #HSP.ug?$p6un

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11122308





































You need to ensure that a user named Allan Deyoung can perform searches and place holds on mailboxes, SharePoint Online sites, and OneDrive for Business locations. The solution must use the principle of least privilege.

To complete this task, sign in to the Microsoft 365 admin center.

82. HOTSPOT

You have a Microsoft 365 tenant.

You need to retain Azure Active Directory (Azure AD) audit logs for two years. Administrators must be able to query the audit log information by using the Azure Active Directory admin center.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

83. DRAG DROP

You have a Microsoft 365 E5 subscription that uses Microsoft Defender for Endpoint and contains a Windows 10 device named Device1.

You have a PowerShell script named script1 that collects forensic data and saves the results as a file on the device from which the script is run.

You receive a Microsoft Defender for Endpoint alert for suspicious activities on Device1.

You need to run script1 on Device1 and retrieve the output file of the script.

Which four actions should you perform in sequence in Microsoft 365 Defender portal? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

84. HOTSPOT

You have a hybrid Microsoft 365 deployment that contains the users shown in the following table.





You need to perform an eDiscovery content search.

Which users data can be included in the content search? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

85. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: &=Q8v@2qGzYz

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11032396

You need to ensure that [email protected] receives an alert when a user establishes a sync relationship to a document library from a computer that is a member of an Active Directory (AD) domain.

To complete this task, sign in to the Microsoft Office 365 admin center.

86. Which user passwords will User2 be prevented from resetting?

87. HOTSPOT

You have a Microsoft 365 subscription.

You identify the following data loss prevention (DLP) requirements:

✑ Send notifications to users if they attempt to send attachments that contain EU social security numbers

✑ Prevent any email messages that contain credit card numbers from being sent outside your organization

✑ Block the external sharing of Microsoft OneDrive content that contains EU passport numbers

✑ Send administrators email alerts if any rule matches occur.

What is the minimum number of DLP policies and rules you must create to meet the requirements? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

88. CORRECT TEXT

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.

When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.

Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.

Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.

Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.



Username and password





Use the following login credentials as needed:

To enter your username, place your cursor in the Sign in box and click on the username below.

To enter your password, place your cursor in the Enter password box and click on the password below.

Microsoft 365 Username:

admin@[email protected]

Microsoft 365 Password: #HSP.ug?$p6un

If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.

The following information is for technical support only:

Lab instance: 11122308





































You plan to create a script to automate user mailbox searches. The script will search the mailbox of a user named Allan Deyoung for messages that contain the word injunction.

You need to create the search that will be included in the script.

To complete this task, sign in to the Microsoft 365 admin center.

89. You have a Microsoft 365 Enterprise E5 subscription.

You use Microsoft Defender for Endpoint.

You need to integrate Microsoft Defender for Office 365 and Microsoft Defender for Endpoint

Where should you configure the integration?

90. Your network contains an on-premises Active Directory domain. The domain contains servers that run Windows Server and have advanced auditing enabled.

The security logs of the servers are collected by using a third-party SIEM solution.

You purchase a Microsoft 365 subscription and plan to deploy Azure Advanced Threat Protection (ATP) by using standalone sensors.

You need to ensure that you can detect when sensitive groups are modified and when malicious services are created.

What should you do?

91. You have an Azure Active Directory (Azure AD) tenant that contains the users shown in the following table.





You configure the Security Operator role in Azure AD Privileged Identity Management (PIM) as shown in the following exhibit.





You add assignments to the Security Operator role as shown in the following table.





Which users can activate the Security Operator role?

92. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 subscription.

You have a user named User1. Several users have full access to the mailbox of User1.

Some email messages sent to User1 appear to have been read and deleted before the user viewed them.

When you search the audit log in Security & Compliance to identify who signed in to the mailbox of User1, the results are blank.

You need to ensure that you can view future sign-ins to the mailbox of User1.

You run the Set-Maibox -Identity "User1" -AuditEnabled $true command.

Does that meet the goal?

93. You have a Microsoft 365 E5 subscription that contains the users shown1 in the following table.





Azure AD Identity Protection detects that the account of User1 is at risk and generates an alert.

How many users will receive the alert?

94. DRAG DROP

You have a Microsoft 365 subscription.

A customer requests that you provide her with all documents that reference her by name.

You need to provide the customer with a copy of the content.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

95. HOTSPOT

You have a Microsoft 365 E5 subscription that contains two users named Admil and User1. a Microsoft SharePoint Online site named Site1, and a retention label named Retention1.

The role assignments for Site1 are shown in the following table.





Site1 includes a file named File1.

Rentention1 has the following settings:

• Retain items for a specific period: Retention period: 7 years

• During the retention period: Mark Items as a record

• At the end of the retention period: Delete items automatically Rententon1 is published to Site1.

User1 applies Retention1 to File1.

For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

96. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an on-premises Active Directory domain named contoso.com.

You install and run Azure AD Connect on a server named Server1 that runs Windows Server.

You need to view Azure AD Connect events.

You use the Security event log on Server1.

Does that meet the goal?

97. HOTSPOT

You have a Microsoft 365 subscription that uses a default domain name of litwareinc.com.

You configure the Sharing settings in Microsoft OneDrive as shown in the following exhibit.





Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point.