Study Online MB-330 Exam Dumps to Pass

1. An organization has two legal entities One of the companies is going to sell» new product to the other company The company that will receive the pcoduct must get a discount on items for the first three months of initial sales. You need to configure the system to apply the discount for the specified penod.

What should you do?

2. HOTSPOT

A company uses Dynamics 365 Supply Chain Management. The company is introducing a new line of products that require multiple pieces of new shop floor equipment.

The accounting manager requires the following:

• The new equipment must be tightly controlled throughout the acquisition cycle with vendors.

• All assets must have expected receipts.

• The asset must be automatically created when it is received by the warehouse.

3. DRAG DROP

A company implements warehouse locations in Dynamics 365 Supply Chain Management.

You need to configure location directives for inventory movement.

Which configurations should you use? To answer, drag the appropriate strategies to the correct requirements. Each strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

4. You use Dynamics 365 Supply Chain Management to manage inventory.

You need to adjust inventory and override the current item posting setup.

Which journal type should you use?

5. HOTSPOT

A company plans to stock new items and value those items by using FIFO principle. The company has multiple sites set up. There are multiple warehouses for each site.

You must be able to view the value and quantity of these items at each warehouse.

You need to apply FIFO costing per warehouse.

How should you complete the costing setup? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

6. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company is implementing inventory management in Dynamics 365 Supply Chain Management.

The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.

You need to select the appropriate option to block the inventory in the system.

Solution: Configure a blocking cause in the inventory setup configuration.

Does the solution meet the goal?

7. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company uses Dynamics 365 Supply Chain Management to manage inventory.

Backorders exist on customer sales orders because incorrect data was given on product quantities.

Users need to look up what quantity can be sold and when more product will arrive.

Solution: Ordered shows what quantities are on inbound orders to the warehouse.

Does the solution meet the goal?

8. You need to set up the procurement category hierarchy in accordance with company policy.

What should you do?

9. Note: This question is part of a series of questions that present the same scenario- Each question in the series contains a unique solution that might meet the stated goals.

A company uses Dynamics 365 Supply Chain Management to item returns.

You need to ensure that the original quantity and price from a sales order is used for return orders.

Solution: Use the Find sales order function to the link the return order to the original sales order.

Does the solution meet the goal?

10. A company manufactures and sells custom bicycles. Customers can customize some components to create a custom bicycle. You need to configure sales orders to support the customization allowed for custom bicycle orders.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

11. A company uses Dynamics 365 Supply Chain Management for wave processing.

The system must automatically create a wave when a sales order is released to the warehouse.

You need to configure the system to meet this requirement.

Which configuration should you enable?

12. A company uses Dynamics 365 Supply Chain Management

Three assets at a single location all need the same tune-up. A single worker can complete all three tune-ups. The worker's hours must be allocated to each asset

You need to configure the system for the worker.

Which configuration should you use?

13. A company requires that a percentage of the building overhead costs as well as a percentage of overall labor must be added to a costing sheet for each item.

The company also requires that the labor and overhead costs be calculated independently and then rolled up to a total amount.

Which three actions should you perform to meet the requirements? Select all answers that apply.

14. HOTSPOT

Employee3 needs to schedule deliveries.

How should Employee3 plan for a carrier to deliver goods to Store2? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

15. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company is implementing inventory management in Dynamics 365 for Finance and Operations.

The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.

You need to select the appropriate option to block the inventory in the system.

Solution: Select the full blocking option in the item sampling page.

Does the solution meet the goal?

16. DRAG DROP

A company plans to use warehouse management and dock appointment scheduling in Dynamics 365 for Finance and Operations.

You need to configure the system.

Which configuration options should you use? To answer, drag the appropriate configuration options to the correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

17. You need to set up financial components for the new items.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

18. A company has several warehouse locations. The company acquires a new warehouse.

You must design a new warehouse process workflow for the new warehouse.

You need to configure the workflow.

Which three features should you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

19. A company is implementing Dynamics 365 Supply Chain Management in one legal entity that contains Sitel1 and Site2.

ItemA is a configured item with configurations ConfigA and ConfigB. The business decides to stop buying ItemA ConfigB into Site2 but will still it at Site'.

You must configure ItemA to ensure the buying rules are implemented

What should you configure?

20. DRAG DROP

A bottle manufacturing company uses Dynamics 365 Supply Chain Management to manage operations.

The company plans to install machines that accept empty bottles for a cash refund or donation at several recycling locations.

You need to complete the setup for installation of the assets.

What should you configure for each requirement? To answer, drag the appropriate features to the correct requirements. Each feature may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE; Each correct selection is worth one point.

21. DRAG DROP

A company uses Dynamics 365 Supply Chain Management.

The company needs to maintain item bar codes.

You need to set up bar codes for the items.

Which option should you use for each requirement? To answer, drag the appropriate options to the correct requirements. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

22. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company is implementing inventory management in Dynamics 365 Supply Chain Management.

The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.

You need to select the appropriate option to block the inventory in the system.

Solution: Create a quality order on the quality orders page for the quantity to be blocked.

Does the solution meet the goal?

23. HOTSPOT

An inventory control clerk manages adjustments in inventory.

Some adjustments have a cost impact. Other adjustments must be posted to a specific ledger account or must be registered in inventory.

You need to configure the system.

Which journal types should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

24. HOTSPOT

You need to configure settlement reports for the finance team.

Which processes should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

25. DRAG DROP

You are implementing Dynamics 365 Supply Chain Management.

A user reports that some of the quarantine statuses appear to mean the same thing.

You need to explain the status of quarantine orders by the location of the item.

What is the status of the orders based on the location of the item? To answer, drag the appropriate statuses to the correct steps. Each status may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

26. A company uses Dynamics 365 Supply Chain Management to manage inventory.

The company realizes that there is an incorrect inventory amount for Item 33442 in Warehouse 1.

You need to correct the inventory amount by using the posting setup configured on the item group.

Which two journal types achieve the goal? Each correct selection provides a complete solution. NOTE: Each correct selection is worth one point.

27. HOTSPOT

You need to configure a product attribute to indicate whether a product is a limited edition.

Which configuration should you use for each attribute. To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

28. A manufacturing company uses 365 Supply Chain Management.

The procurement manager updates the minimum stock levels by using tie safety stock journal The manager encounters a setup error while calculating the proposal tr the minimum inventory level by using the service level option

You need to identify the cause of the error.

What is cause of the error?

29. You need to make changes based on the internal audit findings.

Which feature should you enable?

30. DRAG DROP

You need to configure the kosher pickle requirements for VendorA.

What should you configure? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

31. You use Dynamics 365 Supply Chain Management to manage inventory.

Multiple forms are currently required to make insights against inventory supply metrics for an item actionable.

You need to use the supply schedule form to streamline operations.

Which three objects can you use to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

32. A company uses Dynamics 365 Supply Chain Management in one legal entity that contains one site, which contains Warehouse1 and Warehouse2. A customer routinely orders an item that the company usually stocks in Warehouse1.

The customer requires the company to ship orders from Warehouse2 due to shipping cost agreements.

You need to configure the system to meet the request.

Which configuration should you set up?

33. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a $5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.

You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the month.

Solution: On the rebate agreement, set the calculation date type field to created.

Does the solution meet the goal?

34. HOTSPOT

You need to configure the requirements for the operations coordinator and the inbound load for Vendor!

What should you configure for each requirement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

35. A company plans to implement Dynamics 365 for Finance and Operations shipping manifests.

The company wants to use a multiple-level manifest process. You need to ensure that the system is configured for multiple-level manifest processing.

What should you validate?

36. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company is implementing inventory management in Dynamics 365 Supply Chain Management.

The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.

You need to select the appropriate option to block the inventory in the system.

Solution: Manually create a transaction on the inventory blocking page.

Does the solution meet the goal?

37. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a $5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.

You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the month.

Solution: On the rebate agreement, specify each item group assigned to wine. Add a rebate line break of quantity 10-100 and a second rebate line break of quantity 101-200.

Does the solution meet the goal?

38. You are implementing Dynamics 365 Supply Chain Management for a company that uses bill of materials (BOM) templates to expedite setup in the system.

A line must be removed from the BOM, but the system does not allow this.

You need to determine why you are unable to perform this deletion.

Why are you unable to delete the line?

39. You need to configure the system to support the pottery product line.

What should you do first?

40. DRAG DROP

You are the sales manager at a distribution company.

You have a drop-ship order for a batch of chemicals that will go directly from your vendor to your customer.

You need to create and process this direct delivery within Dynamics 365 Finance and Operations.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

41. A manufacturing company is implementing Dynamics 365 Supply Chain Management for asset maintenance. The temperature control system requires calibration every six months by a certified metrologist.

You need to configure the six-month cadence requirement.

What should you configure?

42. A manufacturing company has implemented Dynamics 365 Supply Chain Management. The company relies on machinery and equipment for its operations. It has a diverse range of assets, including manufacturing equipment, vehicles, and tools.

The company wants to optimize its asset maintenance processes to minimize downtime and improve overall productivity.

The company wants to implement both preventive and reactive maintenance strategies on the following scenarios:

• Changing the tires and oil on the maintenance vehicle fleet.

• Replacing a faulty component on a box maker.

You need to determine the functionality to use for each maintenance requirement.

Solution: Create a maintenance round for the vehicle fleet and a maintenance plan for the box maker.

Does the solution meet the goal?

43. A company uses the nonconformance functionality in Dynamics 365 Supply Chain Management.

When a manufactured part fails a quality test, a quality clerk creates a nonconformance. You determine that additional items are needed to correct the issue.

You must record the additional items for the nonconformance.

What should you do?

44. A company is implementing the Warehouse management module in Dynamics 365 Supply Chain Management.

The company will receive an item in three units of measure (UOM): each, case, and pallet. The item must be counted from a mobile device in each UOM or case UOM only by the warehouse worker.

You must configure the item.

What should you configure?

45. SIMULATION

You are a functional consultant for a company named Contoso Entertainment System USA (USMF).

Sales order number 000754 contains a delivery detail of three ruggedized laser projectors. The customer reports that only two projectors were delivered.

You need to update the packing slip for the sales order.

To complete this task, sign in to Dynamics 365 portal.

46. A company is considering using Planning Optimization instead of Master Planning.

What are two architectural benefits when using Planning Optimization? Each correct answer presents a complete solution. Select all answers that apply.

47. SIMULATION

You are a functional consultant for a company named Contoso Entertainment System USA (USMF).

You need to copy the bill of materials (BOM) of item number T0012 to a new BOM.

To complete this task, sign in to Dynamics 365 portal.

48. You need to define the number of quarantine zones.

How many should you define?

49. HOTSPOT

You need to create new location directives.

Which values should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

50. A company uses Dynamics 365 for Finance and Operations.

A customer returns a product that is defective for a replacement.

You need to process the return order.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

51. HOTSPOT

You need to configure the solution to replace the Excel spreadsheet.

Which feature should you use for each requirement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

52. A manufacturing company uses Dynamics 365 Supply Chain Management.

The company replaced its burners to limit carbon dioxide emissions. The new burners require frequent servicing to be compliant with environmental regulations. The new burners ate more complex and take longer to service than the previous burners.

The production controller must track fuel use in liters to schedule timely maintenance. The additional time taken to plan maintenance must be considered.

You must configure the system to meet the requirements.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

53. A warehouse picks and ships product.

The warehouse completes work immediately upon automatic release to the warehouse.

You need to configure waves to allow for automatic work creation.

What should you do?

54. DRAG DROP

An energy sustainability company uses Dynamics 365 Supply Chain Management.

The company sells raw materials to contractors working on a pipeline project by using special pricing. The company plans to sell raw materials to non-pipeline contractors; however, those sales will not be eligible for the special pricing, any discounts, or price breaks. The non-pipeline contractor pricing may change over time. The price history must be retained.

You need to configure the system for the pricing requirements.

What should you configure? To answer, drag the appropriate configurations to the correct pricings. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

55. A company is using advanced warehouse functionality in Dynamics 365 Supply Chain Management.

A batch-tracked item in high-demand caused delays on sales orders. The vendor delivery is expected today.

Sales orders must be held until the items are checked for quality.

You need to set up batch attributes to allow for warehouse processing but hold sales orders.

What should you configure?

56. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A vendor is offering a rebate program on bottles of wine that have purchase orders placed within a month. There is a $5.00 rebate on the purchase of 10-100 bottles and a $6.00 rebate for the purchase of 101-200 bottles. Customers can purchase wine by the bottle or by the case. Discounts apply to all varieties of wine sold by the vendor.

You need to create a vendor rebate agreement to ensure that the correct rebate amount is claimed at the end of the month.

Solution: On the rebate agreement, set the calculation date type field to created.

Does the solution meet the goal?

57. HOTSPOT

A company uses Dynamics 365 Supply Chain Management. Inventory is valued through FIFO costing.

The warehouse manager identifies item discrepancies and increases quantities in a counting journal.

Finance then discovers that the cost on ItemA posted as zero dollars on the journal transaction.

You need to configure the system to ensure that the cost is populated on the transaction.

What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

58. Employee 1 needs to set up the new items for the product line

Which two actions should Employee1 perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

59. DRAG DROP

A client uses Dynamics 365 Supply Chain Management.

You need to configure automatic freight reconciliation.

Which configuration options should you use? To answer, drag the appropriate configuration options to the correct requirements. Each configuration option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

60. Topic 5, Trey Research



Case study

Overview

This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.



To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.



At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.



To start the case study

To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.



Background

Trey Research is a multinational manufacturer of health and dietary supplements based in Seattle, Washington. The company is experiencing a rapid expansion not only in its supplements but as a lifestyle brand that also sells apparel. The supplements and apparel businesses operate independently but manufacture and operate in the same legal entity.



Current environment

Current environment. Technology

Trey Research is migrating from an outdated, on-premises version of Dynamics AX to Dynamics 365 Supply Chain Management. The company wants to retain a lot of its current data structures and processes but adopt new efficiencies when the benefit is obvious. The company uses a third-party e-commerce site that is custom developed by an internal developer.



Current environment. Items

Product numbering

All items are numbered by using a smart numbering format: [Product SKU+Size+Color+Style]. For reporting, items are queried for sales and inventory reports by using the first six digits of the item number or until the first dash is encountered.

• A t-shirt could be 01001-S-Red for item 1001 in a size small with the color red.

• A single energy drink could be 02001-12oz or 02001-20oz for the different sizes that product 02001 is sold in.



Product attributes

• All clothing shares the same set of product attributes.

• Supplements may share the same Product SKU but can have different attributes for the different size, color, or style variations of the product.

• Product attributes that are unnecessary for an item should be excluded from the item.



Pricing

• All items always have a default price. This price will not expire.

• An item will have four different prices created for it every month, one for each customer tier, as detailed later in this section. The pricing expires at the end of the month. If no special pricing is created, the default item price will be used.

• The monthly sales price in which the additional price breaks are determined is based on the estimated cost of the manufactured items.

• Customers are categorized into four pricing tiers (A, B, C, and D) based on sales volume over the past 12 months.

• Customers can negotiate special pricing for items in 30-day, 60-day, and 90-day increments. Quantity restrictions may be placed, depending on the item discount and promotion.

• Promotional pricing is not used today. Pricing is restricted to monthly prices and customer-specific contract pricing.



Cost

Items use a FIFO costing model today in their current Dynamics AX 2009 environment; however, using the FIFO costing method has created problems.



Current environment. Warehouse and inventory

• Warehouse requirements are simplistic. There is only one site. The site has two warehouses.

• Trey Research needs to make sure that any energy drinks and nutritional supplements are manufactured and packaged with the highest standards. Trey Research automatically inspects products when all products are reported as finished. All products are inspected again when the items are picked.

• Energy drinks require independent tests to check for dents in packaging, carbonation levels, and fill level.

• Nutritional supplements require separate tests for packaging, expiration date, product seal, and product labeling.

• Government compliancy and consistency testing are handled outside of the Enterprise Resource Planning (ERP) system.

• Resalable products are placed on one of two racks in the warehouse.



Requirements

Requirements. Technology

• Trey Research will integrate all pricing and discount capabilities to its e-commerce website.



Requirements. Items

• Reporting on products should be streamlined as much as possible.

• The item numbering does not have to equate to the actual item number.

• The future costing methods adopted must be commonly accepted for manufacturers.

• Inventory costing should be done after a full inventory valuation is complete. It should take into consideration the direct materials, direct labor, and overhead that goes into an item.

• Any costing method used needs the ability to track cost records about an item, cost categories, and calculation formulas for indirect costs.

• The profitability for nutritional supplements manufacturing processes needs to be expressed in terms of the cost categories for routing operations and the calculation formulas for manufacturing overheads.

• If a vendor can no longer deliver the raw materials for the energy drinks due to supply chain issues, the costs for using an alternative vendor to source the raw materials should be used to determine the impact on profits.

• Apparel items will not be upgraded to the new costing method until after the go-live date due to resourcing and implementation limitations from the apparel team.



Requirements. Pricing

• Trey Research plans to do promotional pricing. Certain products will receive special pricing during the hours of extreme sporting events that Trey Research sponsors. Before or after the event, normal pricing will resume.



Requirements. White labeling

• Trey Research wants to start white labeling its products under the brands of major nutritional retail store brands. These products would only be sold to specific customers.

• Trey Research will provide and maintain a 'Compare to' price for customers to use to compare the white-labeled products. This Compare to price will also be the default item price for the customer if the customer accidentally lets a contract price expire.

• The configuration of these restrictions must be applied automatically when creating new products for those customers.



Requirements. Warehouse and inventory

• If products in the warehouse must be blocked from transactions for a specific reason, such as a health and safety review, warehouse users should be able to block the products quickly from the ERP system.

• All product quality tests should be processed in a uniform and consistent manner.

• Creation of any quality processes for products inbound to the warehouse, from the production line, or outbound from the warehouse to consumers should be automatically created to facilitate execution.

• Testing requirements:

◦ Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.

◦ Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.

◦ Damaged products must be placed in one of four bins (based on product type) during the inspection process.

◦ You must define quarantine zones to optimize product visibility throughout the testing process.



DRAG DROP

You need to determine the costing versions for the requirements.

Which costing versions should you use? To answer, drag the appropriate costing versions to the correct requirements. Each costing version may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

61. A company classifies items as A, B, C, and D for planning purposes.

You run Planning Optimization for the C items with the following setup:

• a plan filter for the A, B, and D items

• a runtime filter for the C items

The Planning Optimization output does not create any planned orders.

You need to produce results in Planning Optimization for the C items without affecting the A, B, and D items.

What should you do? Select only one answer.

62. You need to include the items from the purchase order in the Intrastat journal.

What should you do?

63. DRAG DROP

A company uses procurement in Dynamics 365 Supply Chain Management.

You need to select the correct system functionalities to meet the company's requirements.

Which system functionalities should you select? To answer, drag the appropriate system functionalities to the correct business requirements. Each system functionality may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

64. A company uses planning optimization in Dynamics 365 Supply Chain Management.

A planning optimization job is triggered by mistake from the user interface. The planning optimization job is running with incorrect runtime filters.

You need to resolve the issue.

What should you do?

65. DRAG DROP

You are the purchasing manager for a company. You enter into a consignment agreement with a vendor.

Raw material R0001 is managed under the consignment agreement with the vendor.

You need to replenish raw material R0001 for consumption and update ownership.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

66. HOTSPOT

A distribution company uses Dynamics 365 Supply Chain Management.

A customer contacts the company to identify a defect in an ordered part. Additional quantities of the defective item are in stock. The defective items require a task that will trigger an action for the items and a label printed.

You need to configure the system.

Which features should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

67. You need to process the expedited photocopier replacement.

What should you do?

68. SIMULATION

You are a functional consultant for a company named Contoso Entertainment System USA (USMF).

You perform a manual inventory count and discover that item number T0003 has an inventory count of 230 units.

You need to adjust the inventory to reflect the manual count.

To complete this task, sign in to Dynamics 365 portal.

69. DRAG DROP

A company uses Dynamics 365 Supply Chain Management.

You need to implement inventory cycle counting.

Which counting methods should you use? To answer, drag the appropriate counting methods to the correct requirements. Each counting method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

70. HOTSPOT

You must configure the acrylic paint requirements.

What should you configure? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

71. A company plans to use the Planning Optimization add-in.

How is data communicated to Planning Optimization? Select only one answer.

72. A company is considering using Planning Optimization instead of the built-in master planning engine.

What are three benefits of Planning Optimization? Each correct answer presents a complete solution.

73. DRAG DROP

You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.

Chemical product, C0001 can be sold in all parts of the United States except for the state of California.

You need to set up these compliance requirements for C0001.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

74. SIMULATION

You are a functional consultant for a company named Contoso Entertainment System USA (USMF).

You need to generate a requisition for the supply of 50 units of a product named Lifecam HD 5000, and then submit the requisition for approval.

To complete this task, sign in to Dynamics 365 portal.

75. HOTSPOT

You need to configure the extreme sports discounts.

Which component should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

76. You need to configure inventory levels for the retail stores.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

77. A manufacturing company uses standard costs for raw materials.

The company opens a new manufacturing location that will have different standard costs for the raw materials. The differences in costs must be reflected on the finished goods.

You need to configure the site setup for the different costs.

Which two configurations can be set up? Select all answers that apply.

78. You are the warehouse manager at a large distribution company and are responsible for all outbound processing. You decide to implement cluster picking functionality to more efficiently aid in picking.

When warehouse workers log in to the mobile device to process a cluster pick, the work items are not assigned to positions as expected.

You need to validate the cluster picking setup.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

79. DRAG DROP

You need to configure the system to meet the metric requirement for sales representatives.

How should you configure the system? To answer, drag the appropriate entities to the correct requirements. Each entity may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

80. You need to resolve the issue for UserC.

What should you do?

81. A manufacturing company has implemented Dynamics 365 Supply Chain Management. The company relies on machinery and equipment for its operations. It has a diverse range of assets, including manufacturing equipment, vehicles, and tools.

The company wants to optimize its asset maintenance processes to minimize downtime and improve overall productivity.

The company wants to implement both preventive and reactive maintenance strategies on the following scenarios:

• Changing the tires and oil on the maintenance vehicle fleet.

• Replacing a faulty component on a box maker.

You need to determine the functionality to use for each maintenance requirement.

Solution: Create maintenance rounds for both the vehicle fleet and the box maker.

Does the solution meet the goal?

82. HOTSPOT

A company implements Dynamics 365 Sales to manage sales prospects.

A salesperson must create a customer record for a new client in Dynamics 365 Supply Chain Management.

You need to create a sales order from an existing quote.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

83. A customer service agent creates a sales order for a custom bill of materials (BOM). You need to calculate the cost of the order-specific BOM.

Where can you find the cost?

84. DRAG DROP

A company is designing a new bicycle by using a dimension-based Bill of materials (BOM). The configuration groups have been defined and created.

You need to set up a BOM for the new bicycle.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

85. A company employee is in charge of warehouse operations and controlling inventory adjustments through journals.

The employee needs to add inventory for samples at a specific cost. The samples were shipped by a vendor without a purchase order. The employee needs to be sure that the inventory value goes to a ledger account so that the value of the samples is not mixed in with another inventory value.

You need to ensure that the employee is able to correctly add the inventory.

What should you do?

86. A distribution company is implementing Dynamics 365 Supply Chain Management.

The company plans to expand into providing trucking services for its primary distribution center. The company may expand into other locations later.

All vehicle maintenance will be performed at standardized intervals to meet trucking regulations.

The vehicles must be established on the maintenance schedule at the distribution center. The fleet manager requires all vehicles to be grouped together by location for the distribution center and by sublocations for any hubs.

The company requires the following implementation:

• Sublocations must inherit the maintenance schedule.

• Non-vehicle assets must not inherit the maintenance schedule.

You need to configure the system to meet the requirements.

What should you configure?

87. DRAG DROP

A company uses Dynamics 365 Supply Chain Management tor asset management.

A specific piece of equipment has a high volume of work orders.

You need to identify the costs associated with machine repairs.

What should you use to identify the costs? To answer, move the appropriate locations to the correct requirements. You may use each location once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

88. A buyer reviews the orders generated by Planning Optimization. The buyer observes that the output for some orders appears incorrect.

The buyer reviews the history and planning logs.

Which two types of information are in the history and planning logs? Each correct answer presents part of the solution. Select all answers that apply.

89. You need to configure automated testing for the following tasks:

• inbound processes from manufacturing

• outbound processed from the warehouse picking process

How many processes should you configure?

90. Topic 8, Munson's Pickles and Preserves Farm



Background

Current Environment

Munson's Pickles and Preserves Farm is a distribution company that supplies pickles, preserves, pickling supplies, and accessory products to local farmers’ markets as well as grocers. Munson's Pickles and Preserves Farm does not produce or provide canning services for any items.



Munson's Pickles and Preserves Farm has an accounting system that is disconnected from the warehousing system. This has caused issues with controlling and valuing inventory. With these core drivers, Munson's Pickles and Preserves Farm decides to implement Dynamics 365 Finance and Dynamics 365 Supply Chain Management.



Warehousing

• Munson's Pickles and Preserves Farm has a single warehouse that serves as the distribution center for all products.

• The warehouse has bulk locations as well as racking, but location names and numbers do not exist.

• Bulk locations are for storage of extra inventory that will not fit into the picking locations.

• The warehouse is temperature-controlled, with locations grouped into two zones: refrigerated and non-perishable.

• Inventory adjustments are made regularly due to lack of inventory controls.



Inventory Data

• Item numbers are inconsistent and were set up as "smart-numbering," such as 1-23-PKL and 44-24-PlCK.

• Cucumbers are not grown by Munson's Pickles and Preserves Farm and may be sourced from local farmers.

• Pickles come in bottle sizes of 8 oz. 16 oz. 32 oz. The bottles are packed in cases.

• Pickles may be spear, chip, or whole shapes within the bottles. This does not impact the cost of the pickles when they are the same flavor.

• Pickle flavors are sweet spicy, and dill. The flavors vary in price.

• Preserves come in multiple flavors, such as mango, strawberry, and grape. These are seasonal items only. Due to the varying flavors and quantities, the preserves are owned by the vendor until they are sold. The mango preserves require refrigeration. The other preserves do not require refrigeration.

• Many items are sold as accessories or supplies for pickling.

• Some items within inventory have an expiration date, such as vinegar.

• Fast-moving items are identified by inventory turns per quarter. Sweet and spicy pickles are the most popular.



Purchasing and Sales

• Munson's Pickles and Preserves Farm has an online store that can be found at munsonspicklesandpreservesfarm.com.

• The online store is limited to a subset of products that are accessories only, such as bottles and jars.

• A new product line of kosher pickles is going to be distributed by Munson's Pickles and Preserves Farm.

• VendorA is the largest vendor that Munson's Pickles and Preserves Farm buys products from. Munson's Pickles and Preserves Farm's second largest vendor is VendorB.



Requirements

Warehousing

• The warehouse manager requires fast-moving items to be easily accessible to the order pickers in AisleA, with no more than one item per bin location in Aisle

A. Both sweet and spicy pickles have more inventory than will fit in AisleA, resulting in bulk location storage.

o Spicy pickles must have no less than half of a pallet in AisleA at any time.

o Sweet pickles must have enough inventory in AisleA prior to creating waves for warehouse work.

• Strawberry preserves are selling slowly this season. They are put away in higher bin locations because they are not considered fast-moving items.



Inventory & Data

• Item numbers must be set up to create a streamlined numbering system. Munson's Pickles and Preserves Farm requires that the old item number be stored in Dynamics 365 for cross reference purposes. Munson's Pickles and Preserves Farm has settled on 0000001 as the item format for pickles instead of 1-23-PKL PKL will be stored as an attribute.

• Item numbers for pickles must be consolidated where possible into a single item number, regardless of bottle size.

• Cucumbers must be sold at actual cost because they are a special order.

• Kosher pickles must be set up in the item master. The kosher pickles are the same size jars and flavors as the other pickles, except that they have a kosher designation and will be slightly more expensive.

• Vinegar and other perishable items must have date tracking for the manufacturer s batch number and expiration date of the product.

• A batch of mango preserves had to be thrown away because the warehouse workers put away the product into the non-perishable zone.



purchasing & Sales

• Cucumbers must be soutced from local vendors for special orders only.

• Munson's Pickles and Preserves Farm recently signed an exclusivity agreement with VendorA, and buyers must now only purchase from VendorA.

• VendorA recently purchased a competitor company, VendorB. VendorA wants to ensure that all agreements with VendorA also apply to VendorB while they work on merging the two companies into one.

• VendorC sells preserves to Munson's Pickles and Preserves Farm and requires the following:

o Shipment requirement: VendorC owns the product after shipment to Munson's Pickles and Preserves Farm until the time of sale.

o On-hand requirement: VendorC has access to view on-hand preserve inventory at Munson's Pickles and Preserves

Farm warehouse.



Issues

• CustomerD reports that the vinegar they ordered had a week left before it expired when they received it. This did not give CustomerD enough time to use the vinegar before they had to dispose of it CustomerD now requires that all vinegar has more than 30 days left before the expiration date.

• A customer calls and states that they ordered kosher pickles and received regular pickles. Inventory Control Clerk 2 reports that kosher and non-kosher pickles of the same variety are in the same warehouse location, contributing to the picking errors.

• A salesperson reports that the margin is incorrect on a customer's special order because the cucumber cost was for the most recent receipt of cucumbers, not the cucumbers received for the specific customer order.

• An internal audit revealed that large quantities of pickles were missing and written off as damaged on multiple occasions over the past year. No documentation or explanation of the write offs exist. There is no documentation of disposal, and no approval from management to substantiate that the pickles were not stolen.

• Jars of pickles are received as eaches. Case counts of pickle jars vary by size:

o 8 oz jars are 12 per case

o 16 oz jars are 6 per case

o The varied counts in each case create overhead in the warehouse.

• The receiving cletk in the warehouse wants to ensure that broken bottles of vinegar are moved to a damage location named locationA. Expired vinegar should be moved to a return-to-vendor location named LocationB. All other vinegar should be put away and sold according to normal location directives.

• Operator 1 is picking a pallet of strawberry preserves from a location to the shipping dock. While picking up the pallet. Operator1 drops the pallet. Operator! must make sure that the strawberry preserves are not available for shipment until the damage is evaluated.

• Operator2 tries to print wave labels that contain item 0000001. The labels start to print and then jam. At the same time, the printer battery needs to be recharged and the labels need to be reprinted.



You need to resolve the mango preserve issue and minimize the number of location directives.

What should you configure?

A. Customer product filter

B. Item group setup product filter

C. Released product setup product filter

D. Warehouse management setup product filter

91. HOTSPOT

You need to resolve Operator's label issue.

Which solutions will achieve the resolution of the labels? To answer, select the appropriate options in the answer area. NOTE; Each correct selection is worth one point.

92. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen

A company uses Dynamics 365 Supply Chain Management to manage item returns.

You need to ensure that the original quantity and price from a sales order is used for return orders.

Solution: Use the Find sales order function to link the return order to the original sales order.

Does the solution meet the goal?

93. You are the planner for a distribution company.

You observe an increase in planned orders for item C0001. You must track the source for these planned orders and break them out based on their demand. You are not concerned with safety stock maximums for this item.

You need to ensure that the master planning batch job will create a unique planned purchase order for every new demand requirement for C0001.

Which coverage code should you use?

94. HOTSPOT

A primary vendor tells you that their purchase order (PO) items will be delivered seven days later than expected. You find another vendor that carries the product and can deliver it the next day.

You need the purchases from both vendors, but only one PO exists in the system.

You need to ensure that the system correctly reflects the inbound products from both vendors.

How should you complete the setup? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

95. SIMULATION

You are a functional consultant for a company named Contoso Entertainment System USA (USMF).

You need to configure a new quality process for item number M0017.

The process must meet the following requirements:

✑ Perform an impedance test on 100 percent of the units purchased.

✑ Initiate the test after the product receipt is posted.

To complete this task, sign in to Dynamics 365 portal.

96. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A process manufacturer is implementing Dynamics 365 Supply Chain Management to produce sports energy bars, beverages, and nutritional supplements.

The company must run a series of quality control tests for all its beverage items for each production run after the items are completed from a production job.

The testing process for all beverages must follow the same process. The energy bars and nutritional supplements have their own testing requirements.

The specific tests are not yet defined.

You need to configure the quality associations in preparation for the requirements.

Solution: Create a quality association for each item with Reference type as Inventory, using Item code as Table and specifying each item on the quality associations. Set Event type to Registered. Set Execution to Before.

Does the solution meet the goal?

97. A company uses Dynamics 365 for Finance and Operations and implements procurement categories.

Purchase requisitions are required for the purchase of procurement category goods.

You need to ensure that the company purchases office supplies only from one specific vendor.

Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

98. You are the customer relations manager at a wholesale company.

You perform promotion planning and must track fund usage.

You need to set up a trade allowance agreement to register and track promotion contracts.

Which two items should you set up prior to creating the agreement? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

99. A company discovers that planned costs are being calculated incorrectly due to missing configurations.

You need to configure the system to prevent calculation of the planned cost for items that are missing the following:

• a valid bill of materials (BOM) version

• a valid cost price

In which two locations can you configure the validation? Select all answers that apply.

100. A company uses Dynamics 365 Supply Chain Management. The company provides warehouse workers with handheld devices to perform inventory operations.

Periodic inventory audits are required due to the frequent theft of some inventory items from a warehouse. Some inventory has been fully depleted. On-hand inventory quantities of other items are consistently incorrect.

You need to configure the system to automatically create cycle-counting work.

Which two methods can you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

101. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company uses Dynamics 365 Supply Chain Management to manage inventory.

Backorders exist on customer sales orders because incorrect data was given on product quantities.

Users need to look up what quantity can be sold and when more product will arrive.

Solution: On Order shows what quantities are on inbound orders to the warehouse.

Does the solution meet the goal?

102. You need to set up and year for the desks.

What should you configure first?

103. DRAG DROP

During a company’s busy season, the sales team experiences multiple backorders.

The company wants to use forecasting to determine seasonal buying trends.

You need to define the setup and data set required for forecasting.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

104. HOTSPOT

All items that a company purchases from a specific vendor arrive with defects.

You need to automatically generate quality orders for all items when the products are physically received from the vendor, and product receipts are issued.

How should you configure the quality association? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

105. A company sells jars of sliced or whole pickles. The company produces jars of various sizes.

You need to set up the item to ensure that pickles have a single item number for all container sizes.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

106. A company has multiple legal entities. The company is implementing Dynamics 365 Supply Chain

Management Purchase orders are generated from multiple legal entities. To reduce shipping costs, the purchase orders must be consolidated into multiple shipping containers of the same type and placed onto a single vessel for inbound receipt into the country/region.

You need to configure the path of the shipping containers.

What should you configure?

107. HOTSPOT

A company uses Dynamics 365 Supply Chain Management to sell consumer electronics to retailers across North America.

An inventory manager needs to view purchase orders by different periods of time for all warehouses.

If there are insufficient orders for expected demand, the manager must create new purchase or transfer orders to meet the demand versus the current on-hand inventory that is already allocated for future demand.

The company also needs to keep a surplus of 5 percent of inventory for unexpected demand.

You need to identify a solution to meet these requirements.

Which feature should you use for each requirement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

108. DRAG DROP

A company is implementing Dynamics 365 Supply Chain Management.

The company requires that historical transactional data from the current system be used to determine future inventory needs. Transactions that fall outside of a standard deviation must be excluded.

You need to configure the system to meet the requirements.

What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

109. A company uses Planning Optimization. The company sets up working day calendars to exclude weekends from calculations.

You configure lead times and safety margins. The system does not use the safety margins in calculations.

You need to ensure that Planning Optimization uses safety margins.

What should you do? Select only one answer.

110. HOTSPOT

A company implements Dynamics 365 Supply Chain Management.

You complete the prerequisites to implement the master planning optimization.

You need to configure the planning optimization feature.

What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

111. DRAG DROP

You manage a Dynamics 365 for Finance and Operations system for a company.

You need to configure agreements in the system.

Which agreement types should you use? To answer, drag the appropriate agreement types to the appropriate scenarios. Each agreement type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

112. Note: This question is part of a series of questions that present the same scenario- Each question in the series contains a unique solution that might meet the stated goals.

A company uses Dynamics 365 Supply Chain Management to item returns.

You need to ensure that the original quantity and price from a sales order is used for return orders.

Solution: Create a margin alert

Does the solution meet the goal?

113. DRAG DROP

A company uses Dynamics 365 Supply Chain Management for purchasing and sales operations across three different sites.

The default order settings for products are configured as shown in the following table.





You need to determine which scenarios allow transactions.

Which transactions are allowed? To answer, drag the appropriate allowed options to the correct scenarios Each allowed option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

114. DRAG DROP

New order items arrive from vendors and come into a company’s main warehouse.

You must set up internal transportation processes in Dynamics 365 for Finance and Operations to distribute goods to other locations.

You need to set up inbound orders through transportation management.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.