Online MB-335 Exam Dumps Help You Build Confidence

1. A company produces pipe at certain fixed lengths.

The company must be able to schedule cutting machines. You set up the cutting machines as resources. AH cutting resources can produce many of the products. There are some products that require cutting machines that can produce longer lengths of product. Only some of the machines can do this.

You need to configure the resources to account for these different products.

What should you do?

2. HOTSPOT

A customer produces light projection toys for holiday decorations throughout the year.

You must implement Bills of material (BOMs) for the product lifecycle.

The solution must meet the following requirements:





You need to create a BOM for each phase.

Which BOM types should you use? To answer, select the appropriate configuration options in the answer area. NOTE: Each correct selection is worth one point.

3. HOTSPOT

A candy manufacturer uses Dynamics 365 Supply Chain Management.

A master planning run needs to prioritize the production jobs for fruit snacks by flavor and color every 16 days.

You need to configure the appropriate parameters in the coverage group.

What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

4. HOTSPOT

A company plans to implement routing and route postings.

You must direct positing of route cards based upon the route group at Report as finished. You set the start default order for route posting to Never and the Report as finished to Route Group Dependent. You set up the route group as shown below.





Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection it worth one point.

5. You need to enable the features and configuration keys for the firepits.

Which two features should you enable? Each answer presents part of the solution. NOTE: Each correct selection is worth one point

6. HOTSPOT

You need to configure scheduling for each production area.

Which scheduling options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

7. You need to configure the system for plastic operations.

Which two parts should be manually reported as finished? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

8. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to It. As a result, these questions will not appear in the review screen.

A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service. You need to create a subcontracting activity for the painting service.

Solution:

• Create a purchase agreement for the subcontracting vendor and add SP-01 as the painting service.

• Create a vendor resource then create a work cell for outsourced painting and add the resource to the work cell.

• Create a production flow process activity for the painting work cell and add the component to be painted as a picking activity.

• Create a server term to tie the purchase agreement to the activity.

Does the solution meet the goal?

9. You need to meet the requirements for User2.

What should you configure?

10. You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.

You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.

You need to set up this item as a full visibility catch weight item.

Which two steps must you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

11. You are building the Bill of materials (BOM) for a new production item. The new item has a subcomponent.

Subproduction orders for the subcomponent must be created when estimating production orders.

You need to configure the BOM line to generate sub production orders.

Which BOM line type should you use?

12. Topic 6, Adatum Corporation



Overview

Adatum Corporation is a multi-entity corporation located in Seattle, Washington in the United States. The company is a leading producer of specialty cakes and cookies. The company also manufactures specialty chocolates that use ethically sourced ingredients from around the world. The company plans to launch a new product line of organic chocolates later this year.



Adatum plans to implement Dynamics 365 Finance and Dynamics 365 Supply Chain Management to

manage financials, inventory, and manufacturing capabilities across the entire organization.

• Manufactured products are stored at the distribution warehouses until they are shipped to customers.

• Individually branded pre-packaged cake and cookie mixes are supplied to specialty cafes and restaurants. The mixes are shipped directly to the cafes and restaurants from the production factories.

• The company maintains a fleet of trucks and also subcontracts shipments between the factories and warehouses to outside vendors.

• The mixes and specialty chocolates are based on standard recipes that use precise ingredient ratios. There are strict rules around ingredient substitutions.

• All mixes use one of three base recipes as their foundation: BaseA, BaseB. and BaseC. Additional ingredients, spices, and flavorings are then added to make the final product.

• BaseA and BaseB are made in large batches and stored until they are used in the other mixes.

• Mixes with BaseA have a shelf life of six months due to the type of flour it uses.

• Specialty chocolates are manufactured only during the holiday season.

• Specialty desserts are offered during the holiday season. This year, customers may specify additional icing colors and cake layers when placing orders. Depending on the popularity of two of the new colors, they may be offered the next year.

• Cocoa oil that is extracted during the production of some of the specialty chocolates is used in the BaseB foundation mix.

• Cleaning and setup of machinery between products has been causing delays in production.

• Prices of raw ingredients such as sugar can fluctuate greatly depending on seasonal and worldwide demand.

• To properly record profitability, ail raw materials use the first in, first out (FIFO) costing method, while finished products are recorded at standard costs.

• Large fluctuations have been occurring at month end in costs reported due to the inability to track production runs that span from month-to-month.

• Leftover flour and sugar from production runs are collected, packaged, and donated to local food banks if the amount is too small to use in other runs.

• To maintain Adatum's certification as a manufacturer of ethically sourced ingredients, the

traceability of every ingredient in all products to their source must be tracked.

• All products must be randomly tested for adherence to quality standards for ingredient makeup and weight.

• Similar recipes must be able to be produced in succession to limit machinery cleaning and setup times.

• All costs must be tracked for each production run and be able to be reconciled at the end of the monthly accounting cycle, including any work in process (WIP) costs and donations.

• The organic chocolate line must be set up. The ingredients cannot be mixed with non-organic ingredients in inventory.

• Mixes are generally stored and sold in 16-ounce bags. Some quantities are sold and distributed in 5. 10. and 20-gallon containers to large restaurants.

• Each mix has a single unique item number and is tracked per batch produced.

• Specialty chocolate products must be stored in climate-controlled areas of the warehouse.

• QA TesterA discovers during a random test that the batch of a mix does not contain the necessary amount of IngredientB.

• VendorZ, who transports finished goods from PlantA to Warehouses, is consistently late picking up product.

• OperatorA must consolidate partial mix batch group runs into saleable package quantities.

• UserB must set up the mix items.

• UserC learns that mixes containing BaseA have been stamped with a batch date from the flour vendor and is not being calculated from the mix manufacturing date. The mixes from the past month that might be impacted need to be identified and the calculation needs to be corrected.

• UserD must update the costs of finished goods. Accounting wants labor calculated in WIP based on how much time an individual spends performing the operation, as well as the finished goods to post to a specific different ledger account.

• UserE must set up and maintain the cost of sugar.

• UserF must decrease downtime for the machinery.

• UserG must plan the specialty desserts for the current holiday season.



HOTSPOT

You need to resolve the issue for UserF.

What should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

13. A company uses Dynamics 365 Supply Chain Management for Process manufacturing.

You are reviewing the planned production orders for the next two weeks. There are several production orders for the same product. One order is scheduled to run the week after another order. You need to optimize the planned production orders.

What should you do?

14. You need to resolve the ModelA charging issue.

Which two configurations should you set on the work order finite capacity? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

15. DRAG DROP

A company makes lubricants and greases used in the automotive industry. The company plans to implement Dynamics 365 Supply Chain Management.

The system must meet the following requirements:

• Schedule the batch production of products.

• Plan for inventory fluctuations of ingredients that are used across different products.

• Schedule delivery of amounts of proprietary compounds used during production from vendors to keep production runs on schedule and eliminating excess stock on hand or delayed production.

You need to perform the initial setup of the company's Dynamics 365 environment.

At which level should you set up the items? To answer, drag the appropriate setup levels to the correct setup options. Each setup level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

16. DRAG DROP

You need to configure the production requirements of the controller.

What should you configure? To answer, move the appropriate configurations to the correct requirements. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

17. You need to configure lot number control for inventory.

Which option should you use?

18. A company produces generic and name-brand paper plates in the same factory using standard costing and unrig the same Bill of materials and routes to produce both product.

The finance and production teams want a way to new individual raw material consumption costs in the ledger.

You need to add a production group to tie finished good to control postings to the ledger.

What should you do?

19. DRAG DROP

A company uses Dynamics 365 Supply Cham Management.

Several production orders are in the started status.

An issue with equipment causes a rollback in the production status tor some of the orders. Some orders must be reset once the equipment is repaired, based on which products were being manufactured.

You need to reset the production orders based on the requirements

Which status should you use for each requirement? To answer, drag the appropriate statuses to the correct requirements. Each status may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

20. A company produces rubber hose. Discrete orders accounts for raw material scrap. The scrap is reported through inventory movement journals.

The company has noticed that most of the scrap that is recorded is due to start up that feeds the hose to the finishing process. In addition, the amount of scrap that is recorded is consistent regardless of the amount of hose being produced. You need to account for material lost during startup.

What should you do?

21. DRAG DROP

A company overstates on-hand raw materials due to the time it takes to post raw materials as consumed when production orders are processed.

All items used to manufacture finished goods must be consumed when a finished good is reported as finished. You must not change all bill of materials lines to use the option of flushing principal. You need to ensure that all production orders consume raw materials at Report as finished.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

22. DRAG DROP

You need to configure the solution for the two issues the production manager reported.

How should you complete the configurations? To answer, move the appropriate configurations to the correct issues. You may use each configuration once, more than once, or not at all. You may need to move the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

23. DRAG DROP

You are the product manager at an orange juice manufacturing company.

For every 1.000 pounds of orange juke, 20 pounds of orange pulp is created which can be sold or reused profitably. The cost is calculated as a weighted average between the quantity of orange juice that is reported as finished and the orange pulp based on the standard cost of each item.

You need to create the formula for orange juice that will produce orange pulp as a result of finishing a batch order.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

24. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen.

A manufacturing company produces electronic components and devices.

The company has scheduling issues related to using working time calendars in manufacturing.

You need to ensure that the working time calendar is used when manufacturing jobs are scheduled.

Solution: Enable route groups for a capacity job type.

Does the solution meet the goal?

25. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service. You need to create a subcontracting activity for the painting service.

Solution:

• Create a purchase agreement for the subcontracting vendor that contains the pricing information for SP-01.

• Create a vendor resource and a work cell for outsourced painting, then add the resource to the work cell.

• Create a production flow process activity using the painting work cell and the service item as the picking activity.

• Create a service term on the activity to tie the purchase agreement to the activity.

Does the solution meet the goal?

26. You need to configure the controller's ModelB asset requirements for the off-season.

What should you do?

27. A company configures master planning to order large and expensive aluminum sheets that are only available at certain times of the year.

The warehouse manager reports that replenishment levels are too high, causing inventory value to be over budget. In addition, the aluminum sheets take up too much space on the shop floor. You need to configure the appropriate replenishment method.

Which coverage dimension should you use?

28. A manufacturing company is implementing production in Dynamics 365 Supply Chain Management. The production scheduler requires that machines not be scheduled to run concurrently when planning production. The scheduler also must be able to see the scheduling in a graphical view. You need to configure the system to meet the requirements.

Which three options should you configure? Each answer presents a partial solution. NOTE: Each correct selection is worth one point.

29. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient in the lotion. Ingredient B is used as a compensating ingredient

You need to ensure that the system is set up to support the manufacturing process.

Solution: Create a formula version for each concentration level.

Does the solution meet the goal?

30. HOTSPOT

You need to resolve the shop supervisor’s issue.

Which options should you use? To answer, select the appropriate option in the answer area. NOTE: Each correct selection is worth one point.

31. HOTSPOT

A company implements Dynamics 365 Supply Cham Management.

You need to ensure that cost roll-ups and sales price calculations are configured for the scenario.

Which options should you use? To answer select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

32. DRAG DROP

A company produces custom-made bicycles that offer many different configurations.

Your standard bicycle, B-0001, is made with many common components such as a frame and wheels. Customers can choose between two frames: F-0001 or F-0009. Wheel W-0001 is only compatible with frame F-0001.

You create the following configuration groups: Frames, Wheels

You need to ensure that users can only select valid combinations of frames and wheels.

In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

33. HOTSPOT

A company uses a make-to-stock strategy for their key production components. The number of active Kanban’s for these components must be constant.

You need to configure a new Kanban rule.

How should you set up the Kanban type and replenishment strategy? To answer select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

34. DRAG DROP

A pharmaceutical manufacturer uses Process manufacturing.

You are consolidating planned batch orders for a specific medication. The order must cover two weeks of demand. No other items need to be consolidated. You need to change the coverage group of the items.

Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

35. DRAG DROP

A company uses Discrete manufacturing concepts to produce cables. The company's production scheduler uses internal documents to track issues on in-process production orders.

The production scheduler must group all in-process production orders according to issues. The scheduler must be able to easily determine issues with production orders.

You need to implement a method to easily identify production orders with issues.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

36. DRAG DROP

You need to meet the substitution requirements for User4 and User5.

What must you configure? To answer, drag the appropriate configurations to the correct substitution requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

37. DRAG DROP

A company uses multiple Dynamics 365 applications to track and repair equipment.

The company wants to improve its repair order process. Repair technicians frequently encounter unexpected issues daily.

The technicians must be empowered to address the issues and create new work orders by doing the following:

• Provide step-by-step, just-in-time training for work order completion in the field by using videos and text.

• Document work order creation in a single, printable document.

• Report on the use of hands-on training.

You need to implement a solution forth requirements.

Which solution should you implement for each requirement? To answer, drag the appropriate solutions to the correct requirements. Each solution may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

38. Topic 2, CASE STUDY 1 Manufacturing Company



General information

A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.



Customization options

The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:







Customization restrictions

The following restrictions on customizations are in place:

* Green color can only be sold with the Legend Trim.

* Orange color can be sold with the Sport or Legend Trim.

* The ML seat must be included in the Legend package.

* The MS seat must be included in the Sport package.



Manufacturing facilities

The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.



Motorcycle manufacturing

The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.



Plastic manufacturing

Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.



Metal Parts

Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.



Facility

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.



Requirements

The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.

Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.



Sales Order

The company has the following requirements for sales orders:

* During the configuration of a sales order, invalid combinations must be prevented.

* Each configuration must create a unique bill of material (BOM) and Route based on options selected.

* Sales pricing for the sales order must be based upon options selected.

* Due to emissions regulations, the motorcycles cannot be sold to the state of California.



Motorcycle manufacturing

The company has the following requirements for motorcycle manufacturing:

* Schedule labor only at the labor pool level without machines by day

* Produce motorcycles within a scheduled day in any order.

* Record actual production labor with start/stop times.

* Record manager approval of labor entered prior to posting.

* Post actual material consumption after production is finished.



Plastic manufacture

The company has the following requirements for motorcycle manufacturing:

* Schedule both labor and machines.

* Adjust schedules by using a Gantt chart.

* Backflush standard labor by operation.

* Post actual material consumption at the start of production.

* Track and allocate costs to the excess plastic.

* Report multiple molded part numbers during the same production run.

* Determine the correct mold to use on a production order.

* Generate a batch number for each production order.



Metal Parts

The company has the following requirements for metal parts manufacturing:

* Schedule shipments to the vendor for painting.

* Receive painted parts into inventory from the vendor.

* Track vendor inventory levels.



Default

You must configure defaults for manufacturing execution production orders to meet the following requirements:

* Ensure accuracy for production order pick list posting.

* Ensure correct pick list creation.



Issues

A. In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.

B. The company is manually calculating an 8% overhead on materials and posting a journal manually.



You need to create the constraint for the ML seat selection.

Which expression constraint should you use?

A. Implies[Trim==Legend,Seat==ML]

B. Seat!=ML

C. [Trim==Legend|Seat==ML]

D. Implies[Seat==ML,Trim==Legend]

39. HOTSPOT

You need to configure the requirements for metal fabrication equipment maintenance.

What must you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

40. Note. This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient in the lotion. Ingredient B is used as a compensating ingredient

You need to ensure that the system is set up to support the manufacturing process.

Solution: Configure the catch weight of Ingredient A to allow for the variances of the concentrations received from the different vendors.

Does the solution meet the goal?

41. HOTSPOT

You are the production scheduler for a manufacturing company.

You have run the Resource Group Capacity report as shown in the Resource Group 21 Capacity exhibit. (Click the Resource Group 21 Capacity tab).





After reviewing that report, you run Resource Capacity reports as shown in the Resource 2101 and 2102 Capacity exhibits. (Click the 2101 Capacity and 2102 Capacity tabs.)





You run the Gantt chart report as shown in the Gantt exhibit to determine the production orders scheduled on the resources. (Click the Gantt tab.)





You need to determine the method to schedule the production lines.





For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

42. DRAG DROP

A recreational vehicle (RV) manufacturing company is implement Dynamics 365 Supply Chain Management. All RVs are configured to order.

Quality checks show that there is an issue with the sealant used with the windows in some of the RVs.

You need to identify which RV models use the sealant and change the sealant item.

Which function should you use for each requirement? To answer, drag the appropriate functions to the correct requirements. Each function may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.

43. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen

A client subcontracts production work to a vendor for production operations. You need to model subcontracting of route operations in production orders.

Solution: Ensure that the service product is stocked and is part of the Bill of Materials.

Does the solution meet the goal?

44. You need to configure production control parameters for liquid cleaning solution manufacturing.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

45. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen.

A manufacturing company produces electronic components and devices.

The company has scheduling issues related to using working time calendars in manufacturing.

You need to ensure that the working time calendar is used when manufacturing jobs are scheduled.

Solution: Disable route groups for a process job type.

Does the solution meet the goal?

46. HOTSPOT

A company that assembles packaging material uses Dynamics 36S Supply Cham Management.

The glue that is used in assembly has run out of stock and will not be back in stock as expected. Another adhesive must be substituted for the glue. This will affect orders in planning as well as production orders that have started.

You need to ensure that the substitute adhesive is used in production until the glue is back in stock.

Which configuration should you use for each requirement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection Is worth one point.