Valid D-PST-DY-23 Exam Dumps are Your best Choice to Pass

Category:

Comments:

0 Comments

Post Date:

December 18, 2023

If you are looking to take your career in Dell Storage to the next level, the D-PST-DY-23 certification is an excellent option. To prepare for the D-PST-DY-23 exam, you need to have a deep understanding of DELL EMC products and how to configure them. The best way to prepare for the exam is by using D-PST-DY-23 exam dumps questions, which give you a better understanding of the format of the exam. This will help you become familiar with the types of questions you can expect on the actual D-PST-DY-23 exam, and it will give you a chance to practice your test-taking skills. Test free online D-PST-DY-23 exam dumps questions below.

Page 1 of 9

1. Which component is responsible for managing software-defined storage features in PowerStore?

Network interface cards

Storage media

PowerStore Manager

Fiber Channel switches

2. What parameter is commonly defined in a protection policy for virtual machines created on vVols?

CPU utilization limits

Storage tiering configuration

Network bandwidth allocation

Backup frequency and retention

3. What are the IP requirements for the management network during initial Configuration wizard for a PowerStore cluster?

PowerStore T requires four IP addresses, and PowerStore X requires six IP addresses

PowerStore T requires three IP addresses, and PowerStore X requires five IP addresses

PowerStore T requires four IP addresses, and PowerStore X requires five IP addresses

PowerStore T requires three IP addresses, and PowerStore X requires six IP addresses

4. Order the steps for creating an SMB file share on a PowerStore.

Configure the NAS server. Provision the file system. Configure the server type. Create an SMB share.

Provision the file system. Configure the server type. Configure the NAS server. Create an SMB share.

Configure the server type. Configure the NAS server. Create an SMB share. Provision the file system.

Create an SMB share. Configure the server type. Configure the NAS server. Provision the file system.

5. What role does a NAS server play in PowerStore file provisioning?

Allocating LUNs

Managing object storage

Hosting shared file systems

Creating virtual machines

6. What is a key capability of PowerStore Migration?

Translating foreign languages

Analyzing network security

Migrating data without downtime

Managing virtual machine snapshots

7. Export Activation file and go to Dell Software Licensing Central.

8. What are some common sources from which PowerStore Migration can import data?

Video streaming services

Social media platforms

Third-party weather apps

Legacy storage arrays

9. What administrative tasks are needed to increase the capacity of the vVols datastore without the use of the VSI plugin?

Change the storage container quota in PowerStore Manager and refresh the datastore capacity in vSphere

Change the storage container quota in PowerStore Manager and restart the VASA service in vSphere

Change the datastore capacity in vSphere and restart the VAAI service in PowerStore Manager

Change the datastore capacity in vSphere and refresh the storage container quota in PowerStore Manager

10. An administrator is asked to protect a virtual machine using a protection policy.

Which statement is correct?

The policy protects the underlying file systems and replication is not supported.

The policy protects the underlying vVols and replication is supported.

The policy protects the underlying file systems and replication is supported.

The policy protects the underlying vVols and replication is not supported.

Page 2 of 9

11. A VM administrator uses their PowerStore user account and noticed they are unable to change their password.

Why?

Extended schema for Unix users in Active Directory not set

VM Administrator role cannot set password

In settings > users: enable allow user to change password not set

Validate user in Active Directory not set

12. Which command is used to enable a Linux host to discover the PowerStore iSCSI targets?

iscsiadm -m node -T targetname -p ipaddress -u

iscsiadm -m discovery -t sendtargets -p ip:port

iscsiadm -m discovery -t receivetargets -p ip:port

iscsiadm -m node -T targetname -p ipaddress

13. What are the Infrastructure details required in Infrastructure Services page during Initial Configuration Wizard of a PowerStore 3000X system?

vCenter and NTP

DNS and vCenter

DNS and NTP

NTP and Management subnet

14. A PowerStore T administrator discovers that only one port on each node is active and passing traffic.

The other port is healthy and online, but total bandwidth is only half of what the customer expects.

Which two actions could resolve the issue? (Choose two.)

Configure Dynamic LAG

Configure VLT

Configure RSTP

Configure LACP

15. A PowerStore cluster generated a major alert regarding an appliance running out of space.

What does this alert indicate?

Used capacity is above 80%

Used capacity is above 90%

Forecast time to full is 14 days or less

Forecast time to full is 28 days or less

16. Which data protection parameter defines how often data is backed up in PowerStore?

Recovery Time Objective (RTO)

Recovery Point Objective (RPO)

Data Retention Period (DRP)

Backup Frequency Interval (BFI)

17. Which protocol is commonly used for Ethernet-based storage communication in PowerStore?

SMTP

HTTP

NFS

iSCSI

18. A storage administrator has configured the addition of a VNX2 as a remote system for migration.

What is the result of this configuration?

PowerStore iSCSI initiators are registered on the VNX2 system

PowerStore Fibre Channel initiators are register on the VNX2 system

Import sessions from the VNX2 are started for all Windows host accessed LUNs

Import sessions from the VNX2 are scheduled for automatic cutover

19. A storage administrator removed an appliance from the cluster.

What is the status of the licenses removed from the appliance?

Licenses become void.

No licensing impact.

Licenses are erased.

20. Which three statements are accurate when describing the NAS Server configuration in PowerStore? (Select 3)

Antivirus Scan can be disabled without any disruption.

Enable the protection policy with only snapshot rules.

Access can be provided to UNIX or Linux and Windows clients simultaneously.

Kerberos authentication can be enabled post NAS server creation.

NAS server network interface creation only support IPv6 addressing.

Page 3 of 9

21. In a PowerStore T source cluster create a 100GB volume with name “Prod_vol” with a category of “Other”. Set its protection policy to replicate the volume with an RPO of 30 minutes to Cluster1. The destination cluster is already configured.

When you have finished, continue to the next question.

22. What is required for metro connectivity in a vSphere environment?

VMware SRM is enabled.

Stretched vSphere cluster

Host is located in local site

Host is located in remote site

23. A company has purchased a PowerStore T single appliance with an expansion enclosure along with 2 data switches and 1 management out-of-band switch.

What is the total number of rack units (Us) required for racking the hardware?

24. When planning rack layout, why should base enclosures be grouped together?

Power distribution requirements

Rack weight balance

Ease of cable management

Hot aisle requirement

25. What does the Cancel operation do to an Import External Storage session?

Terminates the data import session

Removes host access to the source

Invalidates source https certificates

Uninstalls the ImportKit from the host

26. What technology does PowerStore leverage to pool and manage storage resources efficiently?

Fiber Channel

Network Attached Storage (NAS)

PowerScale

Storage Class Memory (SCM)

27. To prevent connectivity alerts how should the 4 front end ports be connected?

All ports from Node A to the one switch, all ports from Node B to the other switch

Connecting ports 2 and 3 from Node A to ports 2 and 3 of Node B

Alternating connections to 2 data switches from each node

All ports from both Nodes to one data switch

28. A customer wants to add capacity to their PowerStore 5000T. The system is populated with 6 NVMe SCM 750 GB drives.

What is the maximum number and type of drives that can be added to the base enclosure?

15 NVMe SCM

15 NVMe SSD

17 NVMe SCM

17 NVMe SSD

29. Which drive Expansion Enclosure configuration is available for the PowerStore 5200?

NVMe SCM (all slots)

NVMe SSD (all slots)

SAS SSD (all slots)

NVMe NVRAM (all slots)

30. Which component is responsible for managing the access of hosts to storage resources in PowerStore?

Storage processor

Data node

Network switch

Host initiator

Page 4 of 9

31. What is the primary purpose of PowerStore administration tasks?

Enhancing hardware performance

Managing user authentication

Monitoring network traffic

Efficiently managing storage resources and operations

32. What role does the migration target play in the PowerStore migration process?

It manages data deduplication.

It initiates the migration process.

It analyzes migration logs.

It receives and stores the migrated data.

33. What information does a host initiator typically provide to access PowerStore block storage?

Encryption keys

IP addresses of backup servers

World Wide Names (WWNs) or IQNs

SNMP community strings

34. In PowerStore, what is the function of a host group?

To group storage nodes together

To organize user accounts

To categorize different storage pools

To manage access to storage resources for specific hosts

35. What is the primary benefit of remote replication for disaster recovery in PowerStore?

Reducing CPU usage

Minimizing network traffic

Ensuring data availability and business continuity

Optimizing file storage allocation

36. How many cables are required for minimum support for PowerStore T Front-End storage connectivity?

37. What is the primary goal of the PowerStore Migration feature?

Increasing CPU performance

Automating backup processes

Enabling cloud storage integration

Facilitating the movement of data between storage systems

38. What is the purpose of applying a protection policy to a block storage resource in PowerStore?

To define the amount of storage space allocated

To ensure data security through encryption

To automate backup and recovery processes

To optimize network bandwidth usage

39. What is the final step in the PowerStore migration process?

Cleaning the source servers

Decommissioning the source storage

Sending migration logs to support

Allocating more CPU resources

40. Match the CLI command to the appropriate configuration.

Page 5 of 9

41. DRAG DROP Place the steps in order for configuring source and destination vCenters when setting up a vVol replication with SRM.

42. What does the remote replication Planned Failover operation do?

Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy

Fully synchronizes the source and destination data states and reverses the replication direction

Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state

Fully synchronizes the destination to the data state of the source and promotes the destination to production

43. Which is the supported Path Selection Policy for an ESXi host to a PowerStore volume?

VMW_PSP_MRU

VMW_PSP_FIXED

VMW_PSP_RR

44. Which two methods would a customer use to migrate their legacy block thick and thin clones to PowerStore? (Choose two.)

Mirrorview

VM Import

Non-disruptive Import

SAN Copy

Agentless Import

45. In PowerStore, how are hosts typically identified within a host group?

By their physical location

By their brand and model

By their IP addresses or WWNs

By their operating system version

46. What does a Storage Administrator need to consider about Resource Balance when assigning volumes?

Whether the Cluster is offline Node failure status I/O utilization

Whether the appliance is online Appliance failure status Cluster utilization

Whether the Node is offline Appliance failure status Node utilization

Whether the appliance is offline Appliance failure status Capacity utilization

47. Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?

Two 10 GigE

Two 25 GbE

Two 100 GigE

Four 1 GbE

48. What is the primary purpose of remote protection in PowerStore?

Increasing local storage capacity

Enhancing CPU performance

Replicating data to a remote site for disaster recovery

Improving network connectivity

49. Which file sharing protocols are available for the UNIX and Linux clients during NAS Server creation?

NFSv3 and Secure NFS

NFSv3 and SFTP

NFSv4 and Secure NFS

NFSv3 and NFSv4

50. Which SMB Version is disabled by default in a PowerStore T?

SMB 3.1.1

SMB 2

SMB 3

SMB 1

Page 6 of 9

51. An administrator removes a volume from an existing volume group which is part of replication. The system generates an error stating that it cannot create a replication session for the volume.

Why does removing the volume generate an error message?

The volume is not mapped to the volume group host

The volume group configuration must be synchronized

The volume group alerts must be acknowledged

The volume already has a protection policy

52. What does the remote replication Failover operation do?

Fully synchronizes the source and destination data states and reverses the replication direction

Fully synchronizes the source and destination data states and stops the current replication session

Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state

Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy

53. What is the first step in the PowerStore migration process?

Generating performance reports

Creating LUNs for destination storage

Selecting migration sources and targets

Configuring network switches

54. A storage administrator is unable to delete a volume.

What is the cause?

Volume has a protection policy.

Volume has snapshots.

Volume has been replicated.

Volume has active data.

55. An administrator receives an alert on a PowerStore Cluster with three appliances:

The appliance A1 is projected to run out of space in 8 days Capacity utilization is above 90 percent

Which tools are available to assist the Administrator with a potential resolution?

Thin provision conversion wizard

System Optimization

Space reclamation wizard

Assisted Migration

56. Which configuration step is required for the installation of the ImportKit?

Select the network interface for the management control path

Select the RSA key that the HTTPS certificate uses on the host data path

Configure the MPIO active path and failover policy

Configure the host iSCSI initiator connectivity to PowerStore

57. What is the purpose of a data protection policy in PowerStore?

To prevent unauthorized access

To allocate storage space efficiently

To define backup and recovery strategies

To manage network bandwidth

58. In PowerStore, what is the first step in the process of provisioning block storage to a host?

Creating a LUN (Logical Unit Number)

Defining a backup schedule

Allocating CPU resources

Installing network drivers

59. Which of the following is a primary use case for Dell EMC PowerStore?

Running virtualized servers

Playing video games

3D rendering

Consolidated storage and data management

60. What is the logical block size when creating and formatting volumes on PowerStore for Windows hosts?

512 bytes

520 bytes

4096 bytes

64 kilobytes

Page 7 of 9

61. What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?

Examine Fibre Channel zoning

Verify host initiators on PowerStore Manager

Review Server Manager MPIO properties

Use the VNX2 SP ping operation

62. A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:

Taken M-F every 2 hours

Retention of 2 days

The snapshots must be accessible through the Previous Versions menu in Windows

Using the PowerStore Simulator, make the appropriate configuration change.

When you have finished, continue to the next question.

63. How many volumes can be created at a time using the PowerStore Manager?

100

123

200

64. A customer wants to add capacity to their PowerStore 7000X. The system is populated with 6 NVMe 15.36 TB SSDs.

What is the maximum number and type of drives that can be added to the base enclosure?

15 SAS SSD

15 NVMe SSD

17 NVMe SCM

17 SAS SSD

65. Refer to the Exhibit.

What is the base resource for Thin Clone 3?

Snapshot 2

Thin Clone 2

Snapshot 3

Volume 1

66. What describes the process used in the Import External Storage migration architecture?

Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage

Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage

Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage

Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage

67. What is the role of a file server in the context of PowerStore file provisioning?

Allocating storage volumes

Managing data deduplication

Providing access to shared files

Managing RAID configurations

68. What is the role of licenses in the context of PowerStore?

Enabling virtual reality applications

Managing physical hardware components

Unlocking software features and capabilities

Configuring RAID levels

69. What is the purpose of configuring Ethernet switching for a PowerStore system?

To enable Wi-Fi connectivity

To optimize storage capacity

To manage power distribution

To establish network connectivity between storage nodes

70. When does a Protection Pokey have to be removed from PowerStore storage resource? (Choose two.)

Before expanding volume capacity

Before moving the volume to a protected volume group

Before refreshing a Storage Resources from a Clone

Before deleting a volume

Page 8 of 9

71. A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects.

Which action could resolve the issue?

Configure VLT and Link Aggregation Control Protocol

Implement VLT and Dynamic Link Aggregation Group

Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group

Implement Dynamic Link Aggregation Group

72. What is a potential challenge of remote replication in PowerStore?

Higher storage costs

Reduced network latency

Simplified management

Increased CPU usage

73. Refer to the Exhibit.

Note the yellow arrow. A Data Center Engineer notices that the LED is blinking blue and amber alternating at one second intervals.

What does this indicate?

Node is Degraded

System is booting

Node in Service Mode

System not initialized

74. An administrator is trying to connect to PowerStore using SSH with PuTTY and log in as the service user.

Which port do they need to SSH to?

443

8443

75. Which requirement of a source storage system is invalid when participating in PowerStore Native Import migration?

With iSCSI connectivity between source and PowerStore, Global storage IP address is not required

Administrator privileges are required on the source and associated hosts to import to a PowerStore cluster

For EqualLogic, the front-end connectivity must be iSCSI

For PowerMax or VMAX, the front-end connectivity must be FC

76. Refer to the exhibit.

Which SMB path is used to access the share from client side?

\SMB-FS07SalesHmarine_Sales

as-smb07.hmarine testSMB-FS07 Hmarine_Sales

\SMB-FS07Hmarine_Sales

as-smb07.hmarine.test Hmarine_Sales

77. Select migrate now

78. Which host identifier can be associated with hosts and host groups?

iSCSI MAC Address

iSCSI IQN

FCID

Fibre Channel Arbitrated Loop Address

79. In PowerStore, what is the primary goal of provisioning storage for VMware virtual machines using vVols?

Improving CPU performance

Simplifying networking configurations

Enhancing data encryption

Aligning storage with VM needs

80. When configuring Ethernet switching for PowerStore, what is a VLAN?

A storage protocol

A network security feature

A type of RAID configuration

A logically segmented network

Page 9 of 9

81. Refer to the exhibit.

An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:

Volume Details

Name: nvme-ds-01

Category: Virtualization

Application: Containers/Kubernetes

Volume Performance Policy: High

Size: 2 TB

Host Details

Name: ESXi-01

Initiator Type: NVMe Host Mappings: NVMe

Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.

When you have finished, continue to the next question.

TAGS:

D-PST-DY-23, D-PST-DY-23 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-PST-DY-23 Dumps Full Version

Q&As: 253
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Valid D-PST-DY-23 Exam Dumps are Your best Choice to Pass

Related

Posts

D-NWR-DY-01 Exam Dumps – Reliable Way to Pass and Get Certified

DELL EMC D-VXR-OE-23 Exam Questions Simulate Actual D-VXR-OE-23 Exam

Prepare D-SNC-DY-00 Exam with Using D-SNC-DY-00 Dump Questions

Good D-PEXE-IN-A-00 Exam Dumps Save Your Preparation Time

About Us

EMAIL

Services

Opening Hours