HP HPE7-A07 Exam Questions Simulate Actual HPE7-A07 Exam

HPE7-A07 exam dumps questions are designed to simulate the actual exam. This means that you will get a feel for the types of questions you can expect to see on the exam, as well as the format and difficulty level. In addition, Aruba Certified Professional - Campus Access HPE7-A07 dumps are often accompanied by detailed explanations and answers. This means that if you get a question wrong, you can learn from your mistake and understand why the correct answer is the right one. Test free online HPE7-A07 exam dumps below.

Page 1 of 3

1. An OSPF router has learned a pain 10 an external network by Doth an E1 and an E2 advertisement Both routes have the same path cost.

Which path will the router prefer?

The router will prefer the E1 path.

The router will use Doth paths equally utilizing ECM

The router will prefer the E2 path.

Both routes will be suppressed until the path conflict has been resolved.

 Loading...

2. A client connecting to a tunneled open network is receiving the wrong VLAN Your customer has a gateway and has sent over a packet capture from a switch port mirror taken from the upstream switch with a packet capture from the IPsec tunnel and the GRE tunnel to help Identify the VLAN being sent from the controller to the AP.

Where will you see the VLAN assignment?

The GRE tunnel will include the VLAN lag assignment

VLAN tag assignment win not he captured in any of the packet captures

IPsec tunnel will include the VLAN tag assignment

VLAN tag assignment win be included in the port mirror

 Loading...

3. A customer’s infrastructure is set up to use Doth primary and secondary gateway clusters on the SSID profile

What is a valid reason for the AP to failover to the secondary gateway cluster?

The primary gateway cluster is up. out the AP is unable to reach the primary gateway cluster.

The secondary gateway cluster is up. hut the AP is unable to reach the secondary gateway cluster

The secondary gateway cluster is heterogeneous.

The secondary gateway cluster is homogeneous.

 Loading...

4. A customer has interfering devices that are seen over the air. They contact you and ask you to configure RAPIDS to help identify interfering and rogue APs. HPE Aruba Networking Central identifies a rogue AP and displays the connected switch port.

How can HPE Aruba Networking Central identify which switch port the AP is connected to?

device profiting on the switch

from the AP MAC address table

from the switch LLDP neighbors table

from the switch MAC address table

 Loading...

5. After onboarding three new AOS 10 gateways using the full-setup methodinto the same Central group, a customer cannot log in to one of the gateways using the HPE Aruba Networking Central remote console due to an incorrect password.

The admin password created using full-setup does not match the global Central admin password.

The admin password created during the run-setup process is not configured to allow me remote console access

The admin password created during the full-setup process does not match the Central group admin password

The admin password created at the Central group level has expired

 Loading...

6. Exhibit.





An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the "EXSTART-DR" slate as shown below.





Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR" state?

Change R1 and R2 to a network type of point-to-point.

Remove the layer 3 MTU configuration.

Ensure the OSPF process is not configured with passive-interface default.

Change the IP address and mask applied to interface 1/1/1.

 Loading...

7. Which statement is true given the following CLIoutput from a CX 6300?

The underlay loopback addresses are in the 172 21 11 x range.

There are two anycast addresses m me overlay fabric.

Duplicate MAC addresses were detected in the overlay fabric

There are three active client overlay VLANs in the overlay fabric

 Loading...

8. A campus topology uses VSXwith a collapsed core topology. The customer added redundant SFP+ transceivers and reconfigured their mobility gateways from a single link to an aggregate Link.

You are asked to verify the CLI output for the link aggregation configuration for one of the mobility gateway cluster members below.





What is a valid configuration?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

 Loading...

9. Exhibit.





What is me expected behavior for ARP traffic sent from H1?

A2 will drop the ARP traffic.

A2 will send the ARP traffic out of ports 1/1/1-1/1/4.

A2 willflood the ARP traffic out of all interfaces.

A2 willsend the ARP traffic out of ports 1/1/1 and 1/1/3.

 Loading...

10. Based on best practices if an SSID is configured Tor a primary and secondary gateway cluster with cluster preemption enabled, which will decide if the APs move to the secondary gateway cluster if all of the nodes in the primary gateway cluster are down?

tunnel orchestrator for LAN tunnel service in HPE Aruba Networking Central

every AP individually

cluster leader in the primary gateway cluster

cluster leader in the secondary gateway cluster

 Loading...

Page 2 of 3

11. Refer to the exhibit.





Which statement is true?

The client performed passive scanning

The client is using BSS Fast Transition

The client is failing 802.1X authentication

The client used an incorrect passphrase

 Loading...

12. A customer is planning to add loT devices that connect wirelessly to the existing 802.1X SSlD. The customer will use ClearPass to authenticate the IoT devices by MAC address but other devices will still need to authenticate by only 802 1X

Exhibit.





The customer provided the current configuration and reported their non-loT 802. IX devices are no longer able to connect.

Which configuration change can be made to fix the issue?

Modify opmode wpa3-aes-gcm-256 to opmode wpa2-aes

Add i2-autn-fairtnrougn to the WLAN configuration

Remove mac-authentication from the WLAN configuration

Modify max-authentication failures to 0.

 Loading...

13. You deployed UBT to securely tunnel traffic from user desktop PCs connected behind VOIP phones Ail other non-UBT dents are connected to a different network. After the deployment users reported interruptions lo their phone service

The VLAN on which UBT clients are placed is not configured on the switch uplink and traffic from the VoIP phones is being dropped

You tailed to correctly configure a user-defined VRF to support the UBT clients behind the VoIP phones, causing traffic to drop.

Broadcast/multicast packets are copied to both the tunnel and locally, causing duplicate packets and network instability

The UBT client broadcast/multicast packets returned to the same switch port and corrupted the phones IMC table

 Loading...

14. Your customer asked for help to apply an ACL for wireless guest users with the following criteria:

• Wi-Fi guests are on VLAN 555

• allow internet access

• only allow access to public DNS servers

• deny access to all internal networks except for any DHCP server

These session ACLs are already present in the CLI of the mobility gateway group:





You have access to the CLl.

Which user role meets all the criteria?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

 Loading...

15. A Windows device attempts to connect to an 802.1X network but it is not receiving the correct role. TEAP has been configured asthe only authentication method in ClearPass.

The wireless configuration is correct.

Exhibit.





What is me mostlikelycause?

The Windows device needs 10 De configured tor TEA

ClearPass requires a second authentication method.

802.1X is not compatible with TEAP in windows device

Only machine authentication should be configured on the Windows device

 Loading...

16. A BGP routing table contains multiple routes to the same destination prefix.

Referring to the table below which route would be marked with a ">" symbol?

Option A

Option B

Option C

Option D

Option E

 Loading...

17. You are deploying a new AOS 10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except tor "central arubanetworks.com

How would you onboard these gateways successfully into HPE Aruba Networking Central?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

 Loading...

18. You configured" a bridgedmode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates.

ClearPass shows the following error.





What is needed to resolve this issue?

Enable authorization in your Authentication Method.

Recreate the SSID m tunneled mode.

Modify your ACX-AD authentication source to include the UPN in the search.

Configure ClearPass to trust the client certificate.

 Loading...

19. Which option shows the correct Banawidth Control for 1024 kbpsdown and 2048 Kops up for the SSID?

A)





B)





C)





D)

Option A

Option B

Option C

Option D

 Loading...

20. What is me recommended configuration to ensure link aggregation is consistent in a campus topology using VSX with two aggregation switches and downlinks to access switches?

Use a custom LACP hash algorithm for improved load Balancing.

Keep the MTU values at the default setting for GRE and VXLAN communications

Use the command "vsx-sync mclag-interfaces" under the VSX context.

Use the command "vsx-sync active-gateways" under the VSX context.

 Loading...

Page 3 of 3

21. You are testing the use of the automated port-access role configuration process using RadSec authentication over VXLAN. During your testing you observed that the RadSec connection will fan during the digital certificate exchange

What would be the cause of this Issue?

The RadSec server was defined on the switch using an IPv6 address that was unreachable

Tracking mode was set to "dead-only", and the RadSec server was marked as unreachable.

The switch is configured to establish a TLS connection with a proxy server, not the radius server.

The RADIUS TCP packets are Being dropped and the TLS tunnel is not established.

 Loading...

22. A customer is running out of IP addresses in a network segment.

What will happen If they add an additional IPsubnet to the same VLAN?

Broadcasts for me two subnets win arrive on all ports in the same VLAN

IGMP will not work in both of the subnets in the same VLAN

This would result in a single SVI using two subinterfaces.

Users can reach each other and establish PTP traffic without passing an L3 point in the same VLAN

 Loading...

 Loading...