D-NWR-DY-01 Exam Dumps - Reliable Way to Pass and Get Certified

D-NWR-DY-01 Exam Dumps – Reliable Way to Pass and Get Certified

Category:

Comments:

0 Comments

Post Date:

October 6, 2024

If you are looking for a reliable and comprehensive way to prepare for your D-NWR-DY-01 certification exam, look no further than D-NWR-DY-01 exam questions. These D-NWR-DY-01 exam dumps questions are designed to help you assess your knowledge, identify your strengths and weaknesses, and improve your chances of passing the exam on the first try. These D-NWR-DY-01 dumps questions cover all the topics and concepts that are essential for the D-NWR-DY-01 exam, so you can be sure that you are fully prepared. Test DELL EMC D-NWR-DY-01 free dumps below.

Page 1 of 22

1. In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups.

What should be considered to avoid backing up the same data twice?

Exclude database or application data from file system backups

Schedule backups during low performance demands on the application server

Ensure file system and database backups for the same client run at the same time

Configure one workflow for both database and application data

2. An EMC NetWorker server has been configured to back up to an AFTD. The volume reaches full capacity.

What is the result of this condition?

Volume is not marked as full; a message is displayed stating that the file system requires more space

Volume is marked as full and continues to back up to either a disk or tape volume

Volume is not marked as full, a save set being written to the AFTD continues to another volume

Volume is marked as full and NetWorker suspends all saves directed to the device

3. In an EMC NetWorker environment with a single datazone, which EMC NetWorker software component would you install on hosts that manage backup devices?

storage node

client

server

Management Console

4. What is one of the features available with VADP (vStorage APIs for Data Protection) in EMC NetWorker?

Option to leverage change block tracking (CBT) feature.

File level recovery is available from Linux image level .vmdk backups.

Single Step VM Recovery to the original machine only.

EMC NetWorker VADP proxy can be a physical server only.

5. What is a characteristic of EMC NetWorker Snapshot Management?

Supports file system clients, NMDA for Oracle, and NMM for Exchange

Licensed separately from the capacity licensing model

Supports a maximum of two snapshots per 24-hour period

Leverages storage system-based snapshot technology

6. In an EMC NetWorker environment, Auto Media Management is currently enabled on the autochanger. The customer requires unlabeled volumes in the autochanger to be used before recyclable volumes are reused.

In addition, the unlabeled volumes need to be automatically labeled before they are used.

How can this be achieved?

Disable Auto Media Management and set all labeled volumes to a mode of Manual Recycle.

Set all labeled volumes to a mode of Manual Recycle.

Set all labeled volumes to a mode of Automatic Recycle.

Disable Auto Media Management.

7. After installing EMC NetWorker server software, which resource needs to be created, at a minimum, before performing a backup?

Device

Schedule

Group

Policy

8. A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.

What is the fastest way to resolve this issue?

Install the NetWorker Extended Client package.

Use an nsrinfo utility instead

Open a case with Dell Support

Use a Windows Explorer to find the mminfo.exe file

9. What is used by a VMware end-user to restore the image-level protected virtual machine with the Data Protection Extension plug-in for Dell EMC NetWorker?

Data Protection Restore Client

NetWorker Management Console

VMware vCenter

vRealize Automation Portal

10. An EMC NetWorker backup environment consists of a large database server to be backed up. Backups are performed nightly.

Which schedule would you use starting on Sunday to minimize the number of save sets required for recovery on Friday morning?

A)

Exhibit A

Exhibit B

Exhibit C

Exhibit D

Page 2 of 22

11. What is the benefit of using the EMC NetWorker Client Direct feature?

Reduced bandwidth usage

Reduced CPU utilization on the client

Reduced number of full backups

Reduced client disk access

12. NetWorker Management Web UI was installed on Backup Server. Backup Server name is "backup-server1.education.com"NetWorker Management Console server name "console-server1.education.com"

What is the URL address to launch the NetWorker Management Web UI?

https://console-server1.education.com:9090/nwui

https://console-server1.education.com:9000/nwui

https://backup-server1.education.com:9000/nwui

https://backup-server1.education.com:9090/nwui

13. A backup administrator is configuring a clustered EMC NetWorker storage node.

How are the devices within the cluster defined?

Remote

Local

Virtual

Dedicated

14. Which process is responsible for authenticating and processing the NetWorker Server remote execution requests?

nsrd

nsrdispd

nsrexecd

nsrmmd

15. You have an EMC NetWorker backup group containing 10 clients. Each client will be backed up at either a Level Full, Incremental, or Differential every day. The backup level for each is controlled by one of five different schedules applied at the client level. The group is used only to control the start time.

What is the most efficient method to force an immediate Full backup of all clients?

Set the Level Override on the group to Full

Modify each of the five schedules to perform only Full backups

Create a new group, add each client to it, set the Level Override to Full

Perform a client-initiated Full backup of each client individually

16. Which Dell EMC NetWorker module applications require the use of block based backups?

Exchange and Hyper-V

Active Directory and SharePoint server

Active Directory and Hyper-V

Exchange and SharePoint server

17. In a Dell EMC NetWorker environment, what is a characteristic of Open Tape Format?

Supported on DD Boost devices

Allows multiplexed, heterogeneous data on the same volume

Only one save stream is written to a tape device at a time

Backs up only changed blocks

18. Which applications are supported by the EMC NetWorker Module for Microsoft (NMM) federated backup?

Exchange Database Availability Group and SQL Always On Availability Group

SharePoint distributed farm and Windows Hyper-V CSV

Both full and incremental backups of Sybase and Exchange Database Availability Group

SharePoint distributed farm and SQL Always On Availability Group

19. What types of IDS logical log backups are supported with NMDA for Informix?

Level 1 & Level 2 backup only

Automatic (continuous) logical log and manual logical log

Level 0 & Level 1 backup only

Automatic (continuous) logical log only

20. An EMC NetWorker backup administrator wants to monitor a data protection environment consisting of Avamar, Data Domain, and NetWorker through a single interface. In addition, the administrator wants the ability to configure Avamar replication through the same interface.

Which EMC tool is recommended?

Backup and Recovery Manager

Data Protection Advisor

NetWorker Management Console

Avamar Administrator Console

Page 3 of 22

21. Which is the main authentication server log file for troubleshooting and verification purposes?

srauthc-servertomcatlogsauthc-server.log

srauthc-servertomcatlogsauthc-server-audit.log

srauthc-serverlogsauthc-cli.log

srauthc-servertomcatlogscommons-daemon.date.log

22. An administrator is backing up a Windows 2008 R2 system using save set ALL with EMC NetWorker version 7.6.2. The administrator notices that no VSS save sets are backed up.

What can be done to back up the VSS save sets?

Specify VSS:DISASTER_RECOVERY=off

Reinstall the client software

Check the VSS service on the client

Recreate the client resource

23. Which policy in EMC NetWorker determines the length of time that records are retained within the Client File Index (CFI)?

Browse

Retention

Snapshot

Staging

24. EMC NetWorker customer has an autochanger with four LTO-3 tape drives, and one advanced file type device. All devices are configured on a single EMC NetWorker server.

Two drives are dynamically shared with an EMC NetWorker storage node. One of the shared drives suffers a mechanical failure and is disabled.

How many nsrmmd processes are now running on the EMC NetWorker server?

25. What happens when an EMC NetWorker AFTD becomes full while backups are running?

Backups are paused; aborted and expired save sets are deleted.

Backups are paused; the oldest save sets are staged.

Backups fail; simultaneous restore jobs continue.

Backups span to another volume.

26. How many types of disk devices are supported by Networker?

27. Which devices support Block Based Backup?

AFTD and PowerProtect DD

PowerProtect DD and Cloud Tier

Tape and AFTD

CloudBoost and ProtectPoint

28. An incremental backup is performed and combined with the most recent full backup and subsequent incremental backups to make a new full backup. A non-PowerProtect DD series appliance is used.

Which backup level is described?

Synthetic Full

Incremental

Virtual Synthetic Full

Cumulative Incremental

29. Which EMC NetWorker process coordinates all scheduled backups?

nsrjobd

nsrd

nsrindexd

nsrmmdbd

30. NMDA for Oracle supports which levels of incremental backups?

1 and 9 only

0, 1, and 9

1 only

0 and 1 only

Page 4 of 22

31. An administrator is trying to perform a browsable recovery of files for a cluster virtual client but fails with a 'Permission Denied' error.

What is the cause of the error?

The Remote Access attribute of the virtual client resource does not contain an entry for all physical cluster nodes.

Browsable recovery is not possible for cluster virtual clients; save set recovery must be used.

Browsable recovery is not possible for cluster virtual clients; Active node must be used.

Not all cluster nodes are online at the time of recovery.

32. An administrator is configuring backups on a client that requires the use of a directive.

Which application-specific module should be specified to ensure specific files are saved regardless of the backup level?

always

swapasm

AES

rawasm

33. When is it recommended that CloudBoost site cache be configured with Dell EMC NetWorker and a public cloud provider?

Streaming workloads or continuous backups are running

Backing up to the cloud and backing up from within the cloud

Connectivity to the cloud provider has low latency

Cloud object store is inaccessible from the LAN

34. A Dell EMC NetWorker backup administrator configured Microsoft Exchange DAG federated backups using NMM with block based backups (BBB). However, the backup failed when attempting to write to AFTDs.

What is the possible reason for the backup failure?

Federated backups are not supported with BBB

nsrnmmsv backup command was used

Client Direct is not enabled

AFTD is not supported with BBB

35. On what type of device is a virtual synthetic full backup performed?

Multiple PowerProtect DD using DD Boost

Cloud Tier using PowerProtect DD

ProtectPoint device on PowerProtect DD

Single PowerProtect DD using DD Boost

36. What is a requirement for performing a synthetic full backup?

A full backup must be run after every 28 incremental operations

A full backup or a synthetic full backup must exist

Synthetic full backups must be directed to Data Domain devices

All devices used in synthetic full operations must be the same device type

37. What is a consideration for using the Dell EMC NetWorker block based backup feature?

No more than 25 consecutive incremental backups can be created.

Backup storage must be deduplication device.

Base client package provides recovery support for all clients.

Full and incremental backups must be on the same device.

38. What is the default timeout value of token expiration defined in the AuthC local database?

60 minutes

72 minutes

480 minutes

520 minutes

39. Which daemons are present on an EMC NetWorker storage node to which a tape library is configured?

nsrexecd, nsrsnmd, nsrlcpd, nsrmmd

nsrexecd, nsrsnmd, nsrindexd, nsrlcpd

nsrjobd, nsrmmd, nsrlcpd, nsrindexd

nsrjobd, nsrmmdbd, nsrd, nsrsnmd

40. Which NetWorker command is used to repopulate the client file index and media database for a specific save set?

scanner -m -S ssid device_name

scanner -m device_name

scanner -i -S ssid device_name

scanner -i device_name

Page 5 of 22

41. A backup administrator is looking for recent notifications from workflows and actions in a policy. Where can they find this information?

policy_notifications.log

policy_log.log

workflow_notifications.log

42. What is a requirement for a media pool used by CloudBoost devices?

not part of a workflow for direct backups

only one CloudBoost media pool is supported for clones

must contain only CloudBoost devices

type must be backup clone pool

43. Which EMC NetWorker command lists save sets stored on each volume?

mminfo

nsrinfo

nsrmm

nsrretrieve

44. A backup administrator has configured three clients for backup on a newly installed EMC NetWorker server. The administrator has configured a workflow to back up the clients at 6 P.M. each day.

The schedule specifies a synthetic full backup on Sunday and incremental backups the rest of the week. After two days, they notice that the client file indexes for these clients are not being backed up.

What is the reason for this issue?

A device needs to be configured and mounted for the 'Server db backup' action

NetWorker server has not been fully licensed yet

The CFI and bootstrap are only backed up for full backups

The override on the 'Server backup' workflow is set to level 'Incremental'

45. In an EMC NetWorker environment, you have been asked to create a custom command using "save" for the testing of new clients from the command line. Where must this custom command reside on the server?

Program FilesLegato
srbin

Program FilesLegato
srres
srdb

Program FilesLegato
sr

Program FilesLegato
srres

46. A backup administrator has been asked to license a backup environment which consists of three NetWorker Datazones.

Using a single License Server, how many license files are required?

47. What is a benefit of using vendor-specific API during a Dell EMC NetWorker Module backup?

Online backups can be used

Save set recovery is supported

Offline backups can be used

Persistent snapshots are supported

48. By default, which port is used for communication between the EMC NetWorker server and the license server?

7938

9000

27000

29000

49. An administrator is performing a directed recover to a Microsoft Windows cluster environment.

What is the role of the client that initiated the recovery?

Destination client

Administering client

NMC client

Source client

50. A backup administrator was asked to configure a Microsoft Exchange server To which two types of devices can this backup be directed?

Dell EMC Cloud Tier and Tape

PowerProtect DD and AFTD

Tape and PowerProtect DD

CloudBoost and PowerProtect DD

Page 6 of 22

51. An EMC NetWorker administrator wants to start all NetWorker processes on a Linux server.

Which command should be run?

/etc/init.d/networker start

/etc/rc2.d/gst start

/sbin/int.d/networker start

/sbin/init.d/gst start

52. What is the primary function of the EMC NetWorker job daemon?

Coordinates scheduled backups, and manages the resulting information and statistics

Generates requests for volume mounting and unmounting when required

Identifies NetWorker hosts and their file systems

Identifies application modules and assigns the correct job to the backup API

53. What is the purpose of the Change Browse Time window when performing a file or directory recovery in EMC NetWorker User?

View the client’s directory structure as it was at a specific point in time

Display all recoveries of all directories from that client

Determine the time and date for the volume used for the backup

Show the date and time of the last recovery for that client

54. What happens when an EMC NetWorker file type device becomes full while backups are running?

Backups are paused; the oldest save sets are staged.

Backups span to another volume.

Backups fail; simultaneous restore jobs continue.

Backups are paused; aborted and expired save sets are deleted.

55. A new NetWorker installation is being integrated with Active Directory for user authentication.

Which command is used to create the relationship between NetWorker Authentication and Active Directory?

authc_config

nsradmin

authc_mgmt

nsrauthtrust

56. What are two best practices when selecting a location for the NetWorker database?

(Select 2)

Is placed on NAS storage.

Is placed on the same drive as the O

Is placed on a SAN volume.

Should be located on a different disk volume from the O

57. A Dell EMC NetWorker administrator has a requirement for a CloudBoost solution that provides the following:

- No on-premises infrastructure is required

- Low-cost cloud object storage for all backup copies

- Deduplication, encryption, and compression at the source

Which CloudBoost use case meets these requirements?

Replication to the cloud

Backup to the Cloud Tier

Backup to the cloud

Backup within the cloud

58. Which type of device is referred to as a BOOST device?

Data Domain

File Type

Advance File Type

Cloud

59. In Dell EMC NetWorker, what is a purpose for the NetWorker save and recover daemon, nsrd?

Manage the NetWorker media database

Start other NetWorker server and storage node daemons

Coordinate all scheduled backups

Provide the read and write service for NetWorker CFI databases

60. By default, what is the username for the NMC server database in Dell EMC NetWorker?

admin

administrator

postgres

networker

Page 7 of 22

61. An EMC NetWorker administrator needs to use a Data Domain system with DD Boost for backup storage. They are using the traditional NetWorker licensing method.

Which licenses must beadded on the NetWorker server?

Data Domain Storage System and Data Domain Capacity Entitlement

Data Domain Disk Backup Option and Storage Node

DD Boost and OPENSTORAGE

OPENSTORAGE and REPLICATOR

62. What action must be taken before NetWorker can support a bootstrap backup from a Cloud Tier device?

Clone the data from the Cloud Tier device on a different Data Domain system

Shut down all NetWorker processes on the NetWorker server

Clone the data from the Cloud Tier device on the same Data Domain system

Rename the Client File Index directory on the NetWorker server

63. An administrator in an EMC NetWorker environment wants to know the exact backup creation date and time along with the backup level.

Which EMC NetWorker functionality should be used to find this information?

Tracking and reporting

Aging

NMC Monitoring

Daemon log

64. You have an EMC NetWorker backup group containing 10 clients. Each client will be backed up at either Level Full, Incremental, or Cumulative Incremental every day. The backup level for each is controlled by the schedule applied at the client level. All clients belong to the same protection group.

What is the most efficient method to force an immediate Full backup of all clients?

Assign the group to a new workflow with the action schedule of Full for the current day Use the default setting for the client override behavior Start the workflow

Set the Override for the current day to Full on the backup action Ensure client overrides are not allowed Start the workflow

Set the schedule on each client resource to perform only Full backups Start the backup action

Perform a client-initiated Full backup of each client individually

65. What needs to be configured to prevent possible name spoofing in an EMC NetWorker environment?

NAT

Forward and reverse-lookup

routing table

/nsr/res/servers

66. In an EMC NetWorker environment, which factor needs to be tuned to balance the performance between backups and restores?

The number of backup streams to tape

The number of scheduled clients started simultaneously

The amount of client data backed up per group

The number of tapes per client backup

67. An EMC NetWorker Administrator needs to find out how much CFI space is used for client CL1.

What command must be run to perform this?

nsrls CL1

nsrinfo CL1

mminfo -q CL1

nsrmm -c CL1

68. Click the Calculator icon in the upper left-hand corner. In an EMC NetWorker environment, the customer is backing up 500 GB per day. The 500 GB is comprised of 35,000 very large files. According to EMC best practices, approximately how large will the Client File Index (CFI) be?

6 MB

4 MB

8 MB

10 MB

69. A Dell EMC NetWorker backup administrator has configured Data Domain Cloud Tier for long-term retention with ECS cloud. After setting up the data movement policy in NetWorker, the administrator discovers that the save set has not moved to their cloud even after cloning completed successfully.

What is a possible reason for this issue?

Data Domain does not have a replication license for managed-file replication.

ECS does not support an app-based policy for cloning using NetWorker.

Data movement policy has not yet run on the Data Domain system.

Backup administrator does not have admin privileges on the Data Domain system.

70. In an EMC NetWorker environment, what is the minimum number of ports required for a standard NetWorker client?

Page 8 of 22

71. In a Dell EMC NetWorker datazone, which command is used to change the existing browse and retention time of a save set?

nsrclientfix

mminfo

nsrim

nsrmm

72. What is the command to manually start the EMC NetWorker processes on a Solaris server?

networker start

./networker

nsradmin

nsrd

73. An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris hosts. Backups are initiated from both the client and server.

How should this be enforced?

Client-side directive

AES directive

NetWorker user local directive

Server-side directive

74. A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving the changes they notice that the server parallelism reverts back to 64.

What action needs to be taken to set server parallelism to 96?

Add NetWorker Storage Node Enabler Code.

Set device max sessions to 96.

Configure group parallelism to 96.

Enable diagnostic mode.

75. Which deduplication solution is supported within a NetWorker environment?

PowerProtect

PowerScale

PowerStore

Avamar

76. A Dell EMC NetWorker backup administrator is considering using a dynamic group for backups of clients in the Finance department. In addition to creating the protection group, what needs to occur in order to run a backup with a dynamic group?

Configure the backup in the department to select clients based on the tag

Add each client in the department to the group resource

Assign a tag to each client resource for that department.

Create a probe resource and assign to each client resource.

77. A storage administrator backs up an Exchange server to an EMC Data Domain system. The Data Domain system is configured as an advanced file device. The administrator now wants to create a copy of the backup and send it to tape.

The backup job completed at 8pm. The administrator wants the copy to be created at 9pm.

Which option should be used?

Use the Scheduled Cloning attribute to schedule a clone job to start at 9 pm.

Run the nsrclone command at 8 pm and the second copy will be directed to tape at 9 pm.

Enable the "clones" attribute in the client's group setting.

From the Administration window, under Media select Save Sets and then the Query Save Set tab. Create clone copies of the backup at 8 pm.

78. A backup administrator is migrating policies from a VMware Backup appliance to the NetWorker vProxy appliance.

Which pre-requisite must be met?

vCenter server is a minimum of version 5.5.x

vProxy version should be 4.x

DDOS version should be 5.7.x and later

NetWorker server and storage node version should be same

79. An EMC NetWorker administrator wants to allow multiple tenants to share a single NetWorker data zone without purchasing any additional licenses.

What solution will address the administrator’s needs?

Restricted Data Zones

NetWorker Snapshot Management

Client Direct backups

Cloud Optimize

80. When backing up Active Directory with NetWorker Module for Microsoft, which feature provides the ability to recover individual objects?

GLR

Online backup

Parallelism

VSS

Page 9 of 22

81. On an EMC NetWorker Client, which command can be used to backup local data?

save

savepsm

nsrsnap_vss_save

nsrndmp_save

82. What are the supported recovery types in the NetWorker User for Windows interface?

What are the supported recovery types in the NetWorker User for Windows interface?

Browsable, Directed, and Snapshot

Browsable, Save set, and Directed

Snapshot, File-level, and Directed

83. What is a characteristic of an instant recovery with Dell EMC NetWorker VMware Protection?

Restores an existing virtual machine to a previous state

Recovers individual files and folders back to a different virtual machine

Restores a virtual machine directly from the backup image without data movement

Creates a new virtual machine running directly from the backup image without data movement

84. The mode of an EMC NetWorker volume was prematurely set to "full".

Which command can be used to change the status of the volume to "appendable"?

nsrmm

mminfo

mmlocate

nsrim

85. How many nsrlcpd processes are running in the EMC NetWorker backup environment shown in the exhibit?

86. An EMC NetWorker Administrator needs to be able to back up and recover a high density active file system to the backup devices connected to local or remote storage nodes.

Add the SnapImage module

Add the NDMP module

Add the PowerSnap module

Add EMC NetWorker Module for Microsoft Applications

87. In a Microsoft Windows environment, an EMC NetWorker backup administrator attempts to recover the VSS SYSTEM save sets to another location. However, the recovery fails.

Whatis the reason for the failure?

VSS does not support directed recoveries

All VSS SYSTEM savesets were being recovered at the same time

System was not rebooted before starting the recovery

Source and destination clients may be of different OS types

88. A backup administrator notices that an EMC NetWorker Windows client takes a long time to complete the daily backup. After investigation, the administrator discovers the client has some large, disk-based file systems.

The client is currently configured as a dedicated storage node. The backup environment consists of a NetWorker server, NetWorker storage node, a NetWorker deduplication node, and several DD Boost devices.

What can be done to speed up the backup for this NetWorker client without changing the file system?

Configure the client for block based backup

Back up the client to an AFTD on the storage node

Disable the Changed Block Tracking feature

Enable Checkpoint Restart at the directory level

89. The CFI for an EMC NetWorker client was accidentally removed.

What happens when trying to perform restores for that client?

Files cannot be browsed

Individual files cannot be recovered

Savesets cannot be recovered Client-initiated restores cannot be performed

90. What is a recommendation for a Dell EMC NetWorker server software installation?

Use NAS storage to enable higher I/O loads

Install the required Java software after installing the server

Configure multi-tenancy during installation

Store the NetWorker databases on the same partition as the OS

Page 10 of 22

91. An administrator has created a workflow with a protection group consisting of a single Linux client. The client is enabled for block based backups. The workflow has actions to perform a backup to an AFTD device and then a clone to tape.

What is the result when the workflow runs?

Workflow should fail since cloning block based backups to tape is not supported

Workflow should fail since block based backups must target Data Domain devices

Workflow should complete successfully

Workflow should fail since block based backups do not support Linux clients

92. Why is a full backup needed to create a disaster recovery backup within EMC NetWorker?

DISASTER_RECOVERY: save set is backed up only during full backups

VSS SYSTEM save sets are backed up only during full backups

VSS backups of DISASTER_RECOVERY: are not enabled if an incremental backup is initiated

VSS SYSTEM FILESET: save set is backed up only during full backups

93. Which is a snapshot technology that is supported by BBB on Linux?

HP Logical Volume Manager

Logical Volume Manager

XVM Volume Manager

IBM XIV

94. A customer asked an administrator to configure Active Directory (AD) granular level backups A backup administrator discovered that the AD Domain distinguished name is CN=company,CN=local What should be entered in the Save Sets attribute for the Domain Controller client to back up the Active Directory?

APPLICATIONS/AD/CN=company,CN=local

CN=companyCN=local

AD:CN=company.CN=local

AD:

95. When performing a backup of a Microsoft Windows 2008 host, which VSS function does EMC NetWorker perform?

Requests the shadow copy

Creates the shadow copy

Freezes the activities

Maintains the shadow copy

96. Which EMC Net Worker settings control the amount of multiplexing?

Group parallelism and max sessions

Server parallelism and device target sessions

Client parallelism and target sessions

Pool parallelism and max sessions

97. A Dell EMC NetWorker administrator has configured the backup of the "All" save set on a Linux host that contains a remote mount point. However, during the restore, the administrator did not see the mount point data but only local data.

What is a possible reason for this behavior?

Linux mount point backup is not supported.

The-x option was not used with the save command.

Mount point backups require the extended client package.

savepnpc command was not used.

98. Which EMC NetWorker process keeps a record of TCP/IP port ranges?

nsrexecd

nsrmmdbd

nsrd

nsrpm

99. By default, what triggers the backup of the Dell EMC NetWorker bootstrap?

nsrdr command

savepsm command

Server database backup action

Traditional backup action

100. What application does the Enhanced Server Recovery option in EMC NetWorker allow us to interact with?

Home Base

Avamar

EMC NetWorker module for Microsoft applications

Data Protection Advisor

Page 11 of 22

101. In a Dell EMC NetWorker datazone, what is contained in a single Client File Index record?

Backup volume information

Hash of backup contents

Path name of a file

Backup media location

102. Which NetWorker daemon or process generated on each Storage Node is responsible to manage all device operations?

nsrmmd

nsrsnmd

nsrlcpd

nsrd

103. What is a supported CloudBoost configuration with Dell EMC NetWorker and a public cloud provider?

A NetWorker Windows client configured to backup directly to a single cloud provider

A CloudBoost appliance with multiple cloud profiles configured for one cloud provider

A NetWorker server with only one CloudBoost appliance for all cloud providers

A single Cloud provider accessing multiple CloudBoost appliances in a NetWorker server

104. A backup administrator has configured a new library using the EMC NetWorker Management Console on an existing storage node. They notice that the library does not show ready in the NMC. Before running backups to the new library, the administrator wants to ensure the process that controls the library is running.

Which process should the administrator look for on the storage node?

nsrlcpd

nsrsnmd

nsrexecd

nsrmmd

105. A company has both short-term backups and long-term backups for compliance.

What cloud solution can be used to backup all applications and data workloads?

Backup to the Cloud

Backup from Within the Cloud

Replication to the Cloud

Infrastructure-as-a-Service

106. Which virtual environments are supported by NetWorker to back up virtual machines?

KVM and Microsoft Hyper-V

Microsoft Hyper-V and Citrix XEN

VMware and Microsoft Hyper-V

Citrix XEN and VMware

107. What needs to be configured for EMC NetWorker to properly communicate with the clients?

DNS

NAT

routing table

Windows

108. What is the minimum number of served licenses required for a customer with 5 datazones and 2 additional storage nodes per datazone?

109. In an EMC NetWorker environment, you are required to keep media in drives for only 10 minutes after completion of backup.

What parameter must be set?

Operation timeout

Unload sleep

Idle device timeout

Withdraw timeout

110. An EMC NetWorker administrator on an UNIX terminal wants to monitor volume mount requests.

Which NetWorker Administrative interface is recommended?

nsrwatch

nsradmin

NetWorker Management Console

Backup and Recovery Manager

Page 12 of 22

111. Be able to recover Microsoft application data from a persistent snapshot.

What is a recommended EMC Networker add-on module?

EMC Networker Module for Microsoft Applications.

EMC Networker Module for Databases and Applications.

EMC Networker PowerSnap Module.

EMC Networker Snaplmage Module.

112. Which command can be used to send message contents to a printer on a Windows NetWorker server?

mail

nsrlog

nsrlpr

smtpmail

113. A backup administrator started the backup of a group containing five clients using the savegrp command from a command prompt on the NetWorker server.

Where will the tracking information for all save sets backed up in the group be stored?

Media database

Client File Index

RAP database

Jobs database

114. What is an advantage of using a Dell EMC Networker synthetic full backup?

Automates the recovery process

Creates a snapshot on only the disk array

Reduces recovery time and steps

Enables users to perform instant restores

115. A Dell EMC NetWorker administrator wants to create a custom notification that sends an e-mail when a backup failure of a specific group of clients occurs.

What is configured to send an e-mail notification?

Notification on the protection group

Notification at the client level

Notification at the senior level

Notification for the workflow

116. Which type(s) of Dell EMC NetWorker devices need to be created to implement NetWorker integration with Data Domain Cloud Tier?

Data Domain, Cloud Tier, and CloudBoost devices

Data Domain devices only

Data Domain and Cloud Tier devices only

Cloud Tier and CloudBoost devices only

117. What is the command to start all of the EMC NetWorker processes on a UNIX server?

networker start

./networker

networker-start

/proc/networker

118. If an incremental backup is performed for an EMC NetWorker client, at what level is its Client File Index (CFI) backed up?

Full

119. A customer needs to store backups in an AWS S3 bucket.

Which component must be used to accomplish this task?

Extended Client

CloudBoost

NMM

NMDA

120. Which private cloud providers does NetWorker support?

Amazon Web Services and Generic OpenStack Swift

Google Cloud Storage and Microsoft Azure

Elastic Cloud Storage and Generic OpenStack Swift

Scality Object Storage and Elastic Cloud Storage

Page 13 of 22

121. On Windows, how many httpd processes are always running when the NMC server is active?

122. An EMC NetWorker administrator configured a Microsoft Exchange client with the NetWorker Module for Microsoft (NMM). In which resource is the backup command specified?

Protection Group

Schedule

Client

Policy

123. By default, where are backups written to when using NetWorker?

File System

Pool

Device

Drive

124. A backup administrator is configuring a clustered Dell EMC NetWorker storage node.

How are the devices within the cluster configured?

Local

Passive

Virtual

Remote

125. What allows Dell EMC NetWorker with CloudBoost to extend on-premises data protection to the cloud?

Backups to the cloud only after first cloning data to a staging server

Direct backups to the cloud with the NetWorker Linux and Windows clients

DD Boost library for data deduplication before transferring data to the cloud

Amazon EC2 and Amazon S3 to enable backups to the cloud

126. What is a benefit of the EMC NetWorker remote device support feature?

Distributes the backup workload throughout a data zone

Sends backup data directly to the backup device, bypassing the storage node

Isolates groups of clients from other clients in the data zone

Reduces the capacity requirements for backup storage

127. You are troubleshooting a problem with EMC NetWorker resources and some of the attributes are not being displayed in NetWorker Administration GUI.

What is done to display the advanced attributes?

Enable Diagnostic Mode

Rescan all devices

Restart gstd and NMC

128. An Administrator has deployed the EMC NetWorker server software with clustering. There are 50 clients and an autochanger with 4 drives controlled by a remote storage node.

What is the path of the backup data from the client to the media?

Client C> Storage Node C> Media

Client C> Media

Client C> Cluster Server C> Media

Client C> Cluster Server C> Storage Node C> Media

129. Which Microsoft VSS component gathers information to properly save applications, services, or files in a filesystem?

Provider

Requestor

Writer

Interceptor

130. A NetWorker server has a media library attached. A customer needs to back up their VMware environment using vProxy A designated pool was created for the VMware backups However, this pool is not listed in the drop-down menu during a backup action creation.

What is the cause of this behavior?

A vProxy is disabled

vProxy backups can only be directed to CloudBoost devices.

The media library is disabled.

vProxy backups can only be directed to Data Domain devices.

Page 14 of 22

131. A company recently deployed workloads in Amazon Web Services (AWS) and preferred to use Dell EMC NetWorker for unified backup and recovery. The system administrator needs to deploy a virtual CloudBoost appliance in VMware.

What needs to be done prior to the deployment?

Download the .OVA file and make it accessible from the computer

Ensure that the proper EC2 Instance Type is selected and configured

Ensure that CloudBoost AMI is available in AWS Marketplace

Enter the AWS access key ID and AWS secret access key

132. Your Windows environment consists of several EMC NetWorker servers on the same subnet that are responsible for backing up only specific clients for security reasons. You need to change one backup client’s “parent” NetWorker server from NWServer-A to NWServer-B.

Which file do you need to change in order to ensure only NWServer-B can back up this client?

srresservers

srres
srdb
srd

srmm
srim.priv

Networkr.cfg

133. What does the -b option specify in the save command?

Bootstrap

Quiet mode

Cross mount points

Destination pool

134. In a Dell EMC NetWorker backup environment with the Data Protection Extension plug-in, which user interface does a VMware end-user need to view the protection status of a virtual machine?

vSphere

vRealize Orchestration Client

vRealize Automation Portal

vProxy

135. Which command is run on the EMC Net Worker server to recover the server's Client File Index from available backup media?

nsrck -L7

nwrecover

recover -S

nsrls

136. When an EMC NetWorker module is deployed, on which NetWorker host is the module-specific backup command executed?

Either on the application host or on the proxy host

Always on the NetWorker server

Either on the NetWorker server or the storage node

Always on the application server

137. A customer has just upgraded their EMC NetWorker server. The upgrade included a new IP address and hostname.

After updating the configuration file on the client, which service should be restarted in order for the change to be recognized?

nsrdb

nsrexecd

nsrd

nsrindexd

138. Which level should be used to back up only the DB2 data that has changed since the last full back up using EMC NetWorker Module for Databases and Applications?

Incremental

Incremental Delta

Synthetic Full

Level 9

139. What command option can be used to test connectivity and simulate the backup on an EMC NetWorker client without backing up the data?

save -n

save -p

save -k

save -i

140. A customer asks an administrator to configure a Microsoft SQL server backup.

Which technologies can be used by NMM for the backup?

BBB and RCT

VDI and VSS

RCT and VDI

VSS and BBB

Page 15 of 22

141. What is a benefit of using the EMC NetWorker Open Tape Format (OTF)?

Enables storage nodes to be moved to hosts with different operating systems

Allows an unlimited number of save streams to be simultaneously written to tape

Enables backup data to be written and read in the local language of the storage node

Permits separation of backup data into a specific set of tape volumes

142. What is the correct sequence of events in a scheduled backup workflow using Dell EMC NetWorker Module for Databases and Applications (NMDA)?

143. Where is a vProxy VM configured when setting up a NetWorker VMware Protection environment using NMC?

In the Storage Node panel

In the VMware Backup Appliance panel

In the Media window

In the Devices window

144. In an EMC Net Worker environment, regardless of what ports the service port range is set to, which two ports will nsrexecd always try to listen on?

7937, 7938

9301, 9302

4711, 4712

8080, 8081

145. A customer has the following EMC NetWorker configuration:

- Two remote storage nodes, Node A and Node B

- Two virtual tape libraries configured on Node A and Node B, respectively

- Twelve virtual tape devices with four drives attached to the NetWorker server, Node A and Node B, respectively

How many nsrlcpd processes are running on the NetWorker server?

146. Which command can be used to recover an EMC NetWorker Management Console database?

recover

mmrecov

nwrecover

recoverpsm

147. A backup administrator has installed a new NetWorker server.

What command is used to apply the license key?

nsradmin

nsrlic

nsrstage

nsrcap

148. In an EMC NetWorker storage node with four stand-alone LTO tape drives, which daemons must be running?

One nsrmmd and four nsrlcpd

Four nsrmmd only

Four nsrmmd and one nsrlcpd

Four nsrlcpd only

149. Refer to the exhibit.

How many nsrlcpd processes are running in the EMC NetWorker backup environment?

150. What is a benefit of EMC Networker’s Open Tape Format (OTF)?

Enables storage nodes to be moved to hosts with different OS

Allows an unlimited number of save streams to be simultaneously written to tape

Permits segregation of backup data into a specific set of tape volumes

Enables backup data to be written and read in the local language of the storage node

Page 16 of 22

151. Which EMC NetWorker feature allows for a failed backup to restart at a known good point prior to the backup failure?

CheckPoint Restart

Client Retries

Scheduled Backup Attempts

Restart Window

152. You are installing a new EMC NetWorker server and would like alerts to be sent automatically to EMC Support.

What additional component needs to be included as part of this installation?

EMC HomeBase Agent

ConnectEMC

SNMP Alert

EMC NetWorker License Manager

153. Refer to the exhibit.

A backup administrator configures an EMC NetWorker staging policy to move save sets from backup Device A to backup Device B. A restore session is started and requires save sets that were staged to Device B.

What is the data flow in this recovery?

Data is reconstructed from Device B to Device A through the storage node and then sent back to the client.

Data goes from Device B through the storage node to the NetWorker server and then to the client.

Data goes from Device B through the storage node and then to the client.

Data is restored to the storage node and copied to the client.

154. Which NetWorker server policy backs up the CFI?

Gold

Server Protection

Platinum

Silver

155. What is a characteristic of a CloudBoost appliance?

Standalone product that can back up to the cloud using the CloudBoost plug-in.

Managed and configured through the Internet using the Cloud portal interface.

Only available as a physical appliance to integrate with a public cloud.

Enables Dell EMC storage products to use only public cloud storage solutions.

156. What is a characteristic of a Dell EMC Networker module backup?

API determines what is included in the backup save streams

Module-specific Networker backup command runs on the Networker server

Backup data always goes through the storage node to the storagedevice

Block based backups are used for all database backups with Networker

157. What is the correct sequence of steps to configure Dell EMC NetWorker as a cluster-aware application for Linux clients?

158. What are valid backup levels in EMC Networker?

Full, Incremental, Differential, Level 0-9, and Synthetic Full

Full, Incremental, Cumulative Incremental, and Level 0-9

Full, Incremental, Cumulative Incremental, Logs only, and Synthetic Full

Full, Incremental, Differential, Logs only, and Synthetic Full

159. A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk Library (EDL). To ensure that the embedded storage node is used to write clone data, what is required?

Create a client for the embedded storage node and set the clone storage node value to itself.

Add the embedded storage node to the "Storage nodes" list in the client's properties.

Add the disk library engine's hostname to the "Read hostname" field.

Create a clone pool and assign appropriate privileges to it.

160. An EMC NetWorker administrator wants to move NMC from the server where it is currently installed to a new Windows system. The NMC reporting feature is being used.

What must be installed on the new system, in addition to the Console server software?

EMC NetWorker Client software and Java Runtime Environment

Java Runtime Environment and Change Journal Manager software

EMC NetWorker Client software and Change Journal Manager software

EMC NetWorker Storage Node software and Java Runtime Environment

Page 17 of 22

161. When performing a server-initiated backup, which EMC NetWorker command is run by the policy framework and issues a remote execution request to clients?

nsrpolicy

savegrp

savefs

nsradmin

162. What is the name of the main authentication service log?

authc-cli.log

authc-server.log

authc-server-audit.log

catalina.date.log

163. NMDA is used to perform an Incremental Delta backup level of IBM DB2.

What type of data is backed up?

Data pages that have changed since the last incremental backup only

Data pages that have changed since the last backup of any kind

Data pages that have changed since the last cumulative backup only

Data pages that have changed since the last full backup only

164. Which EMC NetWorker host can belong to multiple data zones?

Client

Storage Node

Server

Remote Storage Node

165. In Dell EMC NetWorker, what is a characteristic of a probe-based backup?

Name of the probe script must begin with "probe"

A group does not allow multiple probes to be run

Probe processing occurs when the probe action starts

Probe script must reside in a user-defined directory

166. What is a characteristic of a Dell EMC NetWorker data protection policy?

Group of workflows

Data source to protect

Data protection operation

Actions that can be performed

167. Which type of backup is performed when the EMC NetWorker logs display "Successfully established DFA session"?

Directive-based

Differential

Incremental

Client Direct

168. A customer is running an EMC NetWorker 7.6 server on a UNIX platform and wants to monitor backup operations from the command line.

Which utility can be used?

nsrinfo

nsrmmd

nsrjb

nsrwatch

169. What is done to enable load balancing of EMC NetWorker backups across multiple storage nodes?

Configure save session distribution for target sessions

Increase the client parallelism value on the storage node client

Add the storage nodes to the Storage Nodes field on the client resource

Select the "Dynamic nsrmmds" attribute in the storage node properties

170. An EMC NetWorker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has disabled one of the LTO-4 drives.

How many nsrmmd processes are now running on the EMC NetWorker storage node?

Page 18 of 22

171. A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3.

What is the recommended way to perform this?

Manually copy data to AWS S3

Utilize a Dell EMC Cloud Tier feature.

Deploy a NetWorker storage node in AW

172. Which tool is available to help determine and track source capacity usage in an EMC NetWorker environment?

EMC AMP Utility

EMC NetWorker License Manager

nsradmin

nsrlic

173. When connecting to an EMC NetWorker console server from a different host, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the EMC NetWorker console server. However, the error message remains.

What needs to be done to resolve the problem?

Install the supported version of JRE on the NMC client

Reinstall the EMC NetWorker Management Console server.

Reinstall the existing JRE version.

Restart the console server.

174. What configuration information is stored by the EMC NetWorker server?

Clients, Devices, Index, and Pools

Clients, Devices, and Policies only

Groups, Policies, and Schedules only

Groups, Policies, Schedules, and Licensing

175. A backup administrator uses the EMC Networker Module for Microsoft Applications. The administrator wants faster recovery of data directly from snapshots on disk for their Microsoft Exchange implementation.

Which technology is used by NMM to perform backups and recovery?

Volume Shadow Copy Service

NDMP

PowerSnap

Snaplmage

176. How is the EMC NetWorker Source Capacity Licensing Model measured?

Aggregate of full backups from all data sources

Aggregate of all data stored on backup devices

Aggregate of any backups from all data sources

Aggregate of full backups including post deduplication storage

177. A backup administrator is asked to install NWUI on a Linux-based non-NetWorker Server.

Which software package should be used?

lgtoclnt-nw-19.2-0.x86_64.rpm

lgtoxtdclnt-19.2-0.x86_64.rpm

lgtonwui-19.2.x86_64.rpm

lgtonwuiserv-19.2.x86_64.rpm

178. What is a feature of the CloudBoost appliance?

enables the transfer of backups to cloud storage

replaces the PowerProtect DD series appliance

enables the transfer of backups to Dell EMC Cloud Tier

replaces the PowerProtect DDVE appliance

179. You want to perform a single file recovery from an EMC NetWorker NDMP backup of a Celerra NAS device. You are performing this restore from a Windows 2003 NetWorker server.

What recovery must be performed?

Directed

recover

nsrsnap recover

nsrndmp_recover

180. In a Dell EMC NetWorker environment, which role allows a user to modify resources but limited to specific restricted datazones?

Tenant User

Tenant Administrator

Landlord

Global Administrator

Page 19 of 22

181. An administrator has installed and configured a NetWorker server 30 days ago. The customer is concerned the trial period ends soon.

What should the administrator tell the customer?

NetWorker will operate indefinitely with a trial license but without support.

A permanent license must be applied immediately.

NetWorker will operate for 60 more days with a trial license.

NetWorker will operate for 90 more days with a trial license.

182. What is a characteristic of an EMC NetWorker synthetic full backup?

All NetWorker save sets participating in the synthetic full backup must be browsable

NetWorker Snapshot Management supports synthetic full backups

All NetWorker save sets participating in the synthetic full backup must be in the same pool

Supported backup types include file system, databases, and NDMP

183. An EMC NetWorker group resource named "Full_Backup" is configured with the probe-based group checkbox enabled.

What describes probe-based backups?

Backup is triggered by successful execution of a user-defined client probe

Probe resources are assigned to the group

Probe start and end times define the backup start and end period

Probe Interval controls whether the group should be automatically restarted

184. An EMC NetWorker server has been configured to stage from an adv_file type device upon reaching a high water mark of 80%. After the staging begins, which rule determines when the staging process ends?

Capacity must fall below the low water mark

Capacity must fall below the high water mark

All save sets older than the max storage period are moved

Staging destination volume reaches full capacity

185. An EMC NetWorker administrator has two LTO-4 tape drives configured on an EMC NetWorker server. One of the two tape drives is dynamically shared with an EMC NetWorker storage node.

The other tape drive is statically assigned to the EMC NetWorker server. The shared drive stops functioning on the EMC NetWorker server but continues to function on the storage node.

How many nsrmmd are now running on the storage node?

186. A backup administrator is deploying an extended client on a Linux host. The following error is observed during the installation:

Cannot contact a portmapper on port 7937.

What is the recommended action to resolve this issue?

Install the lgtoclnt-[version].rpm package and reinstall the Extended client.

Install the lgtoserv-[version] rpm package and reinstall the Extended client.

Install the lgtonode-[version].rpm package and reinstall the Extended client.

Install the Lgtobbb-[version].rpm package and reinstall the Extendd client

187. A backup administrator has been tasked with installing the NetWorker Module for Meditech on a host used by a hospital.

Which NetWorker installation package provides the additional feature support for this module?

NetWorker.

x.x.exe

NetWorker.

x.x.iso

lgtoxtdclnt.

x.x.exe

lgtoclnt.

x.x.iso

188. Your customer is running an EMC NetWorker 7.6 server and wants to upgrade their clients running NetWorker 7.4.

What are two ways to do this remotely from the NetWorker server?

Software Administration Wizard and nsrpush

Copy with Clients and nsrpush

Software Administration Wizard and nsrclient

Copy and nsrpush

189. In EMC NetWorker, what best describes the source capacity licensing model?

Aggregate of a full backup from all sources

Aggregate of differential backups from all sources

Aggregate of incremental backups from all sources

Aggregate of Level 9 backups from all sources

190. A backup administrator is considering using a dynamic group for backups of clients in the finance department.

What action must they take to run a backup with a dynamic group?

Assign a tag to each client resource for that department

Add each client in the department to the group resource

Assign a tag to each backup action

Create a probe resource and assign to each client resource

Page 20 of 22

191. Which EMC NetWorker database tracks each file in a backup?

CFI

RAP DB

Res DB

Media DB

192. Which EMC NetWorker process manages the Media database?

nsrd

nsrmmd

nsrmmgd

nsrmmdbd

193. A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time.

What type of device should the backup administrator configure?

AFTD

LTO

FTD

NFS

194. While performing a backup of a database using EMC NetWorker modules, how are consistent backups of a database achieved?

All files are backed up at the same time

Block based backups must be used

All files are backed up at the same point or state

Cold backup mode is required for consistency

195. When backing up an Oracle database with EMC NetWorker Module for Databases and Applications, how is the Oracle backup level determined?

Level specified in RMAN backup script.

NSR_BACKUP_LEVEL parameter in NMDA configuration file.

Level specified in EMC NetWorker Schedules resource.

NSR_BACKUP_LEVEL parameter in RMAN backup script.

196. A company has a Dell EMC NetWorker client that is running a non-standard database. The database REDO log files are currently backed up once a day with a traditional backup.

The database administrator has a new requirement to back up the REDO logs four times a day. Where is this configured?

Protection group

Schedule

Backup action

Workflow

197. An EMC NetWorker Administrator wants to start all of the EMC NetWorker processes on a Solaris server.

Which command would run?

/etc/init.d/networker start

/etc/rc2.d/gst start

/sbin/int.d/networker start

/sbin/init.d/gst start

198. Refer to the exhibit.

To which EMC NetWorker pool is the client save set backed up?

Pool A

Pool B

Pool C

Pool D

199. What is a feature of Replication to the Cloud?

no on-premises infrastructure required

fast restore from local cache copies using site cache

fast restore from short-term on-premises copies

greater efficiency with pooled resources

200. A customer recently added a Hyper-V 2016 servers' farm, and the hosted Virtual Machines need to be backed up. The administrator has already installed a NetWorker client on all Hyper-V hosts.Which additional component must be installed on the Hyper-V hosts to a ccomplish this task?

vProxy

NMDA

NMM

Storage Node

Page 21 of 22

201. Refer to the exhibit.

An EMC NetWorker customer has two data zones, A and B, with autochanger AC1 and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is configured as a shared autochanger. Two drives of AC2 are statically assigned.

How many drives of AC2 can be shared in Zone A?

202. An administrator needs to use a Data Domain with DDBoost Option in an EMC Networker environment.

Which license(s) must be added on the EMC NetWorker Server?

Data Domain Device Type Enabler and Data Domain Capacity Enabler

Data Domain Disk Backup Option and Storage Node

Data Domain BOOST and Data Domain VTL

Virtual Tape Library

203. A customer wants to use REST API to manage their Linux-based NetWorker backup server.

How should the administrator respond?

REST API cannot be used to manage NetWorker server

Install the lgtoxtdclnt-[version].rpm package

Install the lgtorestapi-[version].rpm package

No additional configuration is required

204. Which EMC NetWorker process reads and manages the port range information?

nsrexecd

nsrstat

nsrmmd

nsrd

205. Which type of NetWorker recovery automatically performs a point-in-time recovery?

Block-based

Browsable

Directed

Save set

206. Which EMC NetWorker command lists save sets stored in a particular volume?

mminfo -q volume

nsrinfo volume

nsrmm -j volume

nsrretrieve volume

207. Restore operation destroys all previously existing data on the target disk

Probe script must reside in a user-defined directory

Name of the probe script must begin with "probe"

A group does not allow multiple probes to be run

208. You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives. Two drives each are dedicated to the server and storage node. A new Celerra has been added to the network with 500 GB of data.

What must be done to back up the data on the Celerra?

Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or storage node.

Create a storage node on the Celerra and select NDMP in the "type of storage node" field.

Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this device.

Create an NDMP backup pool and add this pool to a save group with other clients.

209. What is a characteristic of EMC NetWorker volume cloning?

The clone volume is a byte-for-byte copy of the source volume.

Only save sets beginning on the volume are cloned.

Only save sets beginning and ending on the volume are cloned.

All save sets on the volume are cloned.

210. A Dell EMC NetWorker backup administrator is configuring a backup to a CIFS share located on a Data Domain system.

Which NetWorker device type is configured?

Data Domain

AFTD

CloudBoost

Tape

Page 22 of 22

211. What resource does NetWorker use to protect VMware objects, save sets, or clients?

Data Protection Policy

Actions

Workflows

Protection Group

212. A Dell EMC NetWorker backup administrator wants to run a clone after backing up their Microsoft Windows clients.

Which configuration will combine the backup and clone?

Policy

Protection Group

Action

Workflow

213. Which three components comprise EMC NetWorker’s three tier architecture?

Server, Storage Node and Client

Master Server, Media Server and Client

Server, Storage Agent and Client

Cell Manager, Devices and Client

214. Your Oracle DBA runs an RMAN script via cron to back up their data to an EMC NetWorker server. You run a report using the NetWorker Management Console (NMC) to view all backup activity. The Oracle backups are missing from the report.

How do you explain this?

An NMC status report needs to be run on the Oracle client to see this information.

A save set detail report needs to be run via NMC to see RMAN backups.

You need to run an event summary in NMC to see data backed up using a Net Worker module.

Data that is backed up manually is not tracked by NMC reporting.

215. On a Linux server, what is used to manage the Dell EMC Common Licensing Platform server?

lmgrd

LMTools

nsrcap

NMC

TAGS:

D-NWR-DY-01, D-NWR-DY-01 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-NWR-DY-01 Dumps Full Version

Q&As: 714
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

D-NWR-DY-01 Exam Dumps – Reliable Way to Pass and Get Certified

Related

Posts

DELL EMC D-VXR-OE-23 Exam Questions Simulate Actual D-VXR-OE-23 Exam

Prepare D-SNC-DY-00 Exam with Using D-SNC-DY-00 Dump Questions

Good D-PEXE-IN-A-00 Exam Dumps Save Your Preparation Time

2024 DELL EMC D-DS-FN-23 Exam Dumps Questions

About Us

EMAIL

Services

Opening Hours