Online TMMi-P_Syll2.1 Dumps Help You Understand Questions Well

Category:

Comments:

0 Comments

Post Date:

October 4, 2024

If you're interested in pursuing the TMMi certification certification, it's important to understand the exam format and the types of questions you can expect. This is where TMMi-P_Syll2.1 questions come in. TMMi-P_Syll2.1 exam dumps questions are designed to simulate the actual certification exam, providing you with a deeper understanding of the exam format and what to expect on test day. By taking practice exams and reviewing TMMi-P_Syll2.1 questions, you can identify areas where you may need to focus your studying. Study free TMMi-P_Syll2.1 exam dumps below.

Page 1 of 4

1. Your organization performs code reviews and architectural reviews on a regular basis, in order to measure product quality early in the lifecycle.

This is an example of implementation of a specific practice from which TMMi level 4 process area?

Product Quality Evaluation

Test Measurement

Advanced Reviews

Quality Control

2. To which TMMi level 4 process area does the specific practice "Define a co approach is defined that co-ordinates both static and dynamic testing?

Product Quality Evaluation

Test Measurement

Advanced Reviews

This is not a specific practice of a TMMi level 4 process area

3. During a TMMi assessment the percentage of process achievement for the Test Policy and Strategy

process area has been determined at 40%.

Which of the following compliance ratings would you assign to the Test Policy and Strategy process area?

Not achieved

Partly achieved

Largely achieved

Fully Achieved

4. Test Planning is defined as one of the process areas at TMMi level 2. It introduces practices such as product risk assessment and defining a test approach for the project. Process areas at higher TMMi levels build on these practices and also address product risk assessments and/or defining a test approach.

Which of the following TMMi level 3 process areas most strongly built on the practices and experiences of Test Planning at TMMi level 2?

1) Test Organization

2) Test Life Cycle and Integration

3) Non-Functional Testing

4) Peer Reviews

1 and 4

3 and 4

2 and 3

1 and 2

5. What is an example of an indirect benefit for a test improvement program?

Improvement in defect detection percentage

Decrease in test execution lead-time

Increased personnel motivation

More reliable test estimates

6. How does TMMi support test process improvement in an Agile context?

By imposing a set of required testing practices to an Agile project.

By using TMMi as a reminder of critical testing practices that are often not defined or forgotten in Agile development methodologies.

By having a focus on defining lean test processes with an Agile mindset.

By using only the test engineering related process areas, and omitting anything that is related to improving at an organizational level.

7. What is an example of an indirect benefit for a test improvement program?

Improvement in staff motivation

Shortened lead-time of test execution phase

Higher levels of defect detection

Improved (more reliable. test estimations

8. In a TMMi assessment, one of the shortcomings stated was the lack of coherency across various test levels and test types being performed. Establishing a master test plan was an improvement action recommended by the assessors.

Which TMMi process area addresses a specific goal and specific practices for establishing a master test plan?

Test Monitoring and Control

Test Organization

Test Lifecycle and Integration

Test Planning

9. Which of the following statements is correct?

TMMi provides an approach for test process improvement.

TMMi provides a specific framework to be used as a reference model for testing in waterfall development methods.

TMMi model addresses all test levels (including static testing) and aspects of structured testing for all kinds of development methods.

TMMi is intended to be used solely for large organizations.

10. Which of the following is a typical element of a test policy?

Define product risks categories

The quality levels to be achieved

Test types to be carried out at each level

Approach to regression testing

Page 2 of 4

11. Which of the following is a specific goal of the process area Advanced Reviews?

Measure Product Quality Early in the Lifecycle by Means of Peer Reviews

Establish a Peer Review Approach

Peer Review Activities are Planned

Defects in Software Work Products are Identified and Removed

12. Which of the following is NOT a specific goal for the process area Test Organization?

Provide Necessary Test Training

Establish Test Functions for Test Specialists

Determine, Plan and Implement Test Process Improvements

Establish Test Career Paths

13. Which of the following statements regarding the CMMI is FALSE?

In the staged representation there is no fixed set of levels or stages to proceed through.

In the continuous representation there is no fixed set of levels or stages to proceed through.

An organization applying the continuous representation can select areas for improvement from different categories.

CMMI has both a staged and continuous representation.

14. Which of the following statements is FALSE?

TMMi practices are an expected component, and they can be achieved by an “alternative” practice in an Agile context.

TMMi refers to the fact that testing should be an integrated part of software development and not be treated as something that is totally separate. As such TMMi and Agile approaches can effectively work together.

Agile approaches and TMMi can not only co-exist, but when successfully integrated will bring substantial benefits.

When doing TMMi test process improvement in an Agile organization, an initial set of TMMi practices of TMMi must be imposed on an organization and applied to be applied to prove compliance.

15. Monitor product quality against plan and expectations

1 and 4

2 and 3

2 and 5

3 and 5

16. Which of the following activities are part of the Acting phase of a test improvement cycle?

i. Refine solutions

Ii. Develop Approach

iii. Implement Solution

iv. Develop Recommendations

v. Analyze and Validate

i, h and v

i and iii

ii and iv

ii, iv and v

17. Which of the following is a TMMi level 5 process area?

Advanced Reviews

Test Measurement

Organizational Innovation and Deployment

Defect Prevention

18. To which TMMi level does the process area Advanced Reviews belong?

TMMi level 2 Managed

TMMi level 3 Defined

TMMi level 4 Measured

TMMi level 5 Optimization

19. A test organization is trying to implement an improvement goal to develop a quantitative understanding of product quality, as part of the process area Product Quality Evaluation.

Which of the following specific practices needs to be addressed as part of process area 4.2 (Product Quality Evaluation) specific goal 1 Project Goals for Product Quality and their Priorities are Established?

Establish test process measures

Identify non-functional product risks

Identify product quality needs

Measure product quality quantitatively throughout the lifecycle

20. The evolutionary testing model (Gelperin and Hetzel) has served as a foundation for historical level differentiation in the TMMi. The evolutionary testing model describes a number of test phases.

Which of the following phases of the evolutionary testing model is closely aligned with TMMi model level 1 Initial?

Debugging-oriented phase

Prevention-oriented phase

Evaluation-oriented phase

Demonstration-oriented phase

Page 3 of 4

21. What is the relevance of CMMI for test organizations?

CMMI is not relevant for a test organization, as CMMI only covers software development.

Organizations that implement CMMI should also use TMMi for their test processes, because CMMI does not cover testing.

CMMI adds value for organizations that implement TMMi because CMMI gives the organization the possibility to implement TMMi in a continuous way.

At CMMI level 3 two specific process area are defined for testing, Validation and Verification.

22. 1.Which of the following statements is NOT a typical business reason for test improvement?

Introduce a new process improvement framework.

Increase predictability of testing.

Reduce the costs of failure by improving effectiveness of testing.

Reduce time to market by increasing efficiency of testing activities.

23. During a TMMi assessment the percentage of process achievement for the Test Planning process area has been determined at 40%.

Which of the following compliance ratings would you assign to Test Planning?

Not achieved

Partly achieved

Largely achieved

Fully Achieved

24. A test process assessment against TMMi levels 2 and 3 has been performed on an international outsourcing software organization. Although many practices, as required by the TMMi model, are already in place, projects suffer from poor test estimations.

Which of the following process areas would need specific attention to address the above mentioned shortcoming?

Test Techniques

Test Planning

Test Design and Execution

Test Training Program

25. Which of the following is a typical business reason for starting a test improvement program?

Higher productivity

Implement exploratory testing

Increase organizational profit

Implement a Testing Centre of Excellence

26. Which of the following statements is a correct description of the scope of the TMMi model?

The TMMi model is specifically targeted towards higher test levels (e.g., system test and acceptance test).

The TMMi model is specifically targeted at dynamic testing and does NOT address static testing.

The TMMi model is intended to support testing activities and test process improvement in both the systems engineering and software engineering discipline.

The TMMi model includes requirements for both formal and informal TMMi assessments.

27. Which of the following activities is one that will typically be performed as part of the Diagnosing phase of the IDEAL test improvement cycle?

Develop Recommendations

Develop Approach

Develop Solution

Plan Actions

28. Which of the following is NOT a source used during the development of the TMMi model?

Capability Maturity Model Integration (CMMI)

International Testing Standards

Industry testing best practices surveys

ISO'IEC 15504 Information technology - Process assessment

29. Which generic practice addresses tailoring a managed process from the organization’s set of standard processes?

Monitor and control the process

Objectively evaluate adherence

Establish an organizational policy

Establish a defined process

30. An organization is facing too many defects occurring during production. As a consequence, an important test improvement goals for the next improvement cycle is to improve the quality (effectiveness) of the test cases.

Which of the following specific practices needs to be addressed, in the context of the improvement goal, as part of SG 1 “Perform Test Analysis and Design using Test Design Techniques” of the Test Design and Execution process area?

Develop and Prioritize Test Procedures

Specify Intake Test Procedure

Identify and Prioritize Test Charters

Identify and Prioritize Test Conditions

Page 4 of 4

31. Consider the following specific goal “Project Goals for Product Quality and their Priorities are Established”.

To which of the following process areas does this specific goal belong?

Test Measurement

Product Quality Evaluation

Advanced Reviews.

Test Policy and Strategy

32. How do TMMi based organizations benefit from the Agile way of thinking?

Within Agile test improvements will typically take place through an organization-wide Test Process Group that can take rapid action

By using TMMi as a reminder of critical testing practices that are often not defined or "forgotten" in Agile development methodologies

The Agile way of thinking typically brings out the initiative to further detail the test processes as they are currently defined

By only focusing on team-based related test process areas, and omitting anything that is related to improving testing at an organizational level.

33. Which test level can NOT be improved using the TMMi model?

Static testing, e.g., reviews

Component testing

User acceptance testing

All levels of testing can be within the scope of a TMMi based test process improvement programme.

34. Which TMMi level 3 process area includes the specific practice Establish the Organization’s Test Process Database”?

Test Organization

Test Lifecycle and Integration

Test Training Program

Peer Review

TAGS:

TMMi-P_Syll2.1, TMMi-P_Syll2.1 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get TMMi-P_Syll2.1 Dumps Full Version

Q&As: 111
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Online TMMi-P_Syll2.1 Dumps Help You Understand Questions Well

Related

Posts

Advance Your Career by Using Online CTFL-PT_D Dumps

Get Certified Easily with Online CTAL-TA_Syll2019 Dumps

Test Online CPSA-FL Dumps Questions to Be Certified

CSeT-F Dumps Help You Study Objectives

About Us

EMAIL

Services

Opening Hours