Valid SPLK-1005 Exam Dumps are Your best Choice to Pass

If you are looking to take your career in Splunk Cloud Certified Admin to the next level, the SPLK-1005 certification is an excellent option. To prepare for the SPLK-1005 exam, you need to have a deep understanding of Splunk products and how to configure them. The best way to prepare for the exam is by using SPLK-1005 exam dumps questions, which give you a better understanding of the format of the exam. This will help you become familiar with the types of questions you can expect on the actual SPLK-1005 exam, and it will give you a chance to practice your test-taking skills. Test free online SPLK-1005 exam dumps questions below.

Page 1 of 3

1. In which file can the SH0ULD_LINEMERCE setting be modified?

transforms.conf

inputs.conf

props.conf

outputs.conf

 Loading...

2. What information is identified during the input phase of the ingestion process?

Line breaking and timestamp.

A hash of the message payload.

Metadata fields like sourcetype and host.

SRC and DST IP addresses and ports.

 Loading...

3. Which statement is true about monitor inputs?

Monitor inputs are configured in the monitor, conf file.

The ignoreOlderThan option allows files to be ignored based on the file modification time.

The crSalt setting is required.

Monitor inputs can ignore a file's existing content, indexing new data as it arrives, by configuring the tailProcessor option.

 Loading...

4. When should Splunk Cloud Support be contacted?

For scripted input troubleshooting.

For all configuration changes.

When unable to resolve issues or perform problem isolation.

For resizing, license changes, or any purchases.

 Loading...

5. Li was asked to create a Splunk configuration to monitor syslog files stored on Linux servers at their organization. This configuration will be pushed out to multiple systems via a Splunk app using the on-prem deployment server.

The system administrators have provided Li with a directory listing for the logging locations on three syslog hosts, which are representative of the file structure for all systems collecting this data.

An example from each system is shown below:





A)





B)





C)





D)

Option A

Option B

Option C

Option D

 Loading...

6. Which of the following is not a path used by Splunk to execute scripts?

SPLUNK_HOME/etc/system/bin

SPLUNK HOME/etc/appa//bin

SPLUNKHOMS/ctc/scripts/local

SPLUNK_HOME/bin/scripts

 Loading...

7. A monitor has been created in inputs. con: for a directory that contains a mix of file types.

How would a Cloud Admin fine-tune assigned sourcetypes for different files in the directory during the input phase?

On the Indexer parsing the data, leave sourcetype as automatic for the directory monitor. Then create a props.conf that assigns a specific sourcetype by source stanza.

On the forwarder collecting the data, leave sourcetype as automatic for the directory monitor. Then create a props. conf that assigns a specific sourcetype by source stanza.

On the Indexer parsing the data, set multiple sourcetype_source attributes for the directory monitor collecting the files. Then create a props, com that filters out unwanted files.

On the forwarder collecting the data, set multiple 3ourcotype_sourc« attributes for the directory monitor collecting the files. Then create a props. conf that filters out unwanted files.

 Loading...

8. Which of the following are features of a managed Splunk Cloud environment?

Availability of premium apps, no IP address whitelisting or blacklisting, deployed in US East AWS region.

20GB daily maximum data ingestion, no SSO integration, no availability of premium apps.

Availability of premium apps, SSO integration, IP address whitelisting and blacklisting.

Availability of premium apps, SSO integration, maximum concurrent search limit of 20.

 Loading...

9. Which of the following statements is true about data transformations using SEDCMD?

A. Can only be used to mask or truncate raw data.

B. Configured in props.conf and transform.conf.

C. Can be used to manipulate the sourcetype per event.

D. Operates on a REGEX pattern match of the source, sourcetype, or host of an event.

 Loading...

10. How are HTTP Event Collector (HEC) tokens configured in a managed Splunk Cloud environment?

Any token will be accepted by HEC, the data may just end up in the wrong index.

A token is generated when configuring a HEC input, which should be provided to the application developers.

Obtain a token from the organization's application developers and apply it in Settings > Data Inputs > HTTP Event Collector > New Token.

Open a support case for each new data input and a token will be provided.

 Loading...

Page 2 of 3

11. When a forwarder phones home to a Deployment Server it compares the check-sum value of the forwarder's app to the Deployment Server's app.

What happens to the app If the check-sum values do not match?

The app on the forwarder is always deleted and re-downloaded from the Deployment Server.

The app on the forwarder is only deleted and re-downloaded from the Deployment Server if the forwarder's app has a smaller check-sum value.

The app is downloaded from the Deployment Server and the changes are merged.

A warning is generated on the Deployment Server stating the apps are out of sync. An Admin will need to confirm which version of the app should be used.

 Loading...

12. In Splunk terminology, what is an index?

A data repository that contains raw, compressed data along with psidx files.

A data repository that contains raw, compressed data along with tsidx files.

A data repository that contains raw, uncompressed data along with psidx files.

A data repository that contains raw, uncompressed data along with tsidx files.

 Loading...

13. What two files are used in the data transformation process?

parsing.conf and transforms.conf

props.conf and transforms.conf

transforms.conf and fields.conf

transforms.conf and sourcetypes.conf

 Loading...

14. What is the recommended method to test the onboarding of a new data source before putting it in production?

Send test data to a test index.

Send data to the associated production index.

Replicate Splunk deployment in a test environment.

Send data to the chance index.

 Loading...

15. Which of the following takes place during the input phase?

Splunk annotates data with only 3 metadata keys: host, source, and sourcetype.

Splunk sets the character encoding of the data.

Splunk looks at the contents of the data to apply the correct source.

Splunk breaks data into individual lines.

 Loading...

16. Which of the following methods is valid for creating index-time field extractions?

Use the UI to create a sourcetype, specify the field name and corresponding regular expression with capture statement.

Create a configuration app with the index-time props.conf and/or transfoms. conf, and upload the app via U

Use the CU app to define settings in fields.conf, and restart Splunk Cloud.

Use the rex command to extract the desired field, and then save as a calculated field.

 Loading...

17. When adding a directory monitor and specifying a sourcetype explicitly, it applies to all files in the directory and subdirectories.

If automatic sourcetyping is used, a user can selectively override it in which file on the forwarder?

transforms.conf

props.conf

inputs.conf

outputs.cont

 Loading...

18. Which of the following is a valid monitor stanza for inputs.conf?

[monitor:///var/log/*.log] index = linux sourcetype = access_combined host = 489307057

[monitor:\varloghttpd-[0-9].log] index = linux sourcetype = access_combined host = 489307057

[monitor:///var/log/httpd-[0-9].log] index = linux sourcetype = access_combined host = 489307057

[monitor:\varlog*.log] index = linux sourcetype = access_combined host = 489307057

 Loading...

19. What is the recommended approach to collect data from network devices?

TCP/UDP Feed > Heavy Forwarder > Intermediate Forwarder > Splunk Cloud

TCP/UDP Feed > Syslog Server with Universal Forwarder > Splunk Cloud

TCP/UDP Feed > Universal Forwarder > Intermediate Forwarder > Splunk Cloud

TCP/UDP Feed > Intermediate Forwarder > Heavy Forwarder > Splunk Cloud

 Loading...

20. Which of the following is true when using Intermediate Forwarders?

Intermediate Forwarders may be a mix of Universal and Heavy Forwarders.

All Intermediate Forwarders must be Heavy Forwarders.

Intermediate Forwarders may be Universal Forwarders or Heavy Forwarders, but may not be mixed.

All Intermediate Forwarders must be Universal Forwarders.

 Loading...

Page 3 of 3

21. In case of a Change Request, which of the following should submit a support case for Splunk Support?

The party requesting the change.

Certified Splunk Cloud administrator.

Splunk infrastructure owner.

Any person with the appropriate entitlement

 Loading...

22. Where can an administrator download the Splunk Cloud Universal Forwarder credentials package?

Splunk Support.

Cloud Monitoring Console forwarder drop-down.

Universal Forwarder app in the Splunk Cloud search head.

Splunkbase.

 Loading...

23. A user has been asked to mask some sensitive data without tampering with the structure of the file /var/log/purchase/transactions. log that has the following format:





A)





B)





C)





D)

Option A

Option B

Option C

Option D

 Loading...

24. What is the default port for sending data via HTTP Event Collector to Splunk Cloud?

443

8088

9997

8000

 Loading...

 Loading...