Valid HPE7-A06 Exam Dumps are Your best Choice to Pass

Category:

HP Free Dumps

Comments:

0 Comments

Post Date:

November 30, 2024

If you are looking to take your career in ACX - Campus Access Switching to the next level, the HPE7-A06 certification is an excellent option. To prepare for the HPE7-A06 exam, you need to have a deep understanding of HP products and how to configure them. The best way to prepare for the exam is by using HPE7-A06 exam dumps questions, which give you a better understanding of the format of the exam. This will help you become familiar with the types of questions you can expect on the actual HPE7-A06 exam, and it will give you a chance to practice your test-taking skills. Test free online HPE7-A06 exam dumps questions below.

Page 1 of 14

1. Which HPE command provides an overview of all VLANs and their assigned interfaces on a switch?

show vlan

show interfaces

show ip route

show stack

2. In ClearPass, which type of authentication flow ensures mutual authentication with certificates on both client and server?

EAP-TLS

EAP-MD5

EAP-FAST

PAP

3. For high availability in an HPE network, which feature enables routers to share a virtual IP address, allowing failover in case of a device failure?

VRRP

VLAN pruning

Spanning Tree Protocol

LLDP

4. In an HPE network, which protocol allows multiple switches to communicate their spanning-tree configurations to prevent loops?

MSTP

LACP

DHCP

LLDP

5. In an HPE network, an unexpected root bridge takeover occurs, disrupting the spanning tree topology.

What configuration setting should be checked to prevent this issue?

Root guard

BPDU filter

PortFast

Loop guard

6. In EIGRP, which term describes the minimum metric required for a route to be considered as a backup?

Feasible distance

Reported distance

Feasibility condition

Successor route

7. Multiple Answers: Which two settings are critical for BGP neighbor establishment in an HPE network?

Matching AS numbers

Correct IP address of neighbor

Consistent VLAN IDs

Enabling DHCP relay

8. In a campus network, which feature ensures that rogue DHCP servers do not assign IP addresses to clients?

DHCP Snooping

STP

IGMP Snooping

LACP

9. To support secure 802.1X authentication, what role does a RADIUS server fulfill?

It assigns IP addresses

It authenticates and authorizes users based on credentials

It creates VLANs dynamically

It aggregates links

10. Which protocol on HPE switches allows for device discovery and facilitates network topology mapping?

LLDP

STP

VRRP

LACP

Page 2 of 14

11. When configuring VLANs on HPE switches, which feature ensures that only selected VLANs are allowed on a trunk link?

VLAN pruning

BPDU Guard

Link Aggregation

IGMP Snooping

12. In a network experiencing high broadcast traffic, which command can help identify the source of excessive broadcasts?

show interfaces counters

show ip route

show mac-address-table

show vlan

13. A customer wants to prioritize voice traffic across their HPE network.

Which configuration should be applied?

Enable QoS and configure DSCP values for voice packets

Enable IGMP Snooping

Increase MTU size

Enable DHCP Snooping

14. Which command on an HPE switch provides detailed information on all VLANs and their assigned interfaces?

show vlan

show interfaces

show ip route

show spanning-tree

15. In a network using Link Aggregation, which LACP mode should be configured to allow the switch to initiate the aggregation process?

Active

Passive

Standby

Dynamic

16. Which feature in an HPE network stack configuration allows for rapid failover if one stack member fails?

Stack failover

VRRP

LACP

Spanning Tree Protocol (STP)

17. Which authentication protocol should be used to ensure credentials are encrypted during transmission between client and ClearPass?

EAP-PEAP

PAP

HTTP

IGMP

18. Multiple Answers: For HPE switches operating in a stacked configuration, which two practices improve redundancy and minimize the risk of a single point of failure?

Use redundant stack cables

Implement VRRP on each switch

Set up multiple power sources

Enable DHCP relay

19. What does the command show mac-address-table display on an HPE switch?

A list of MAC addresses learned on each port

The IP routing table

Spanning tree configuration

VLAN assignments

20. In an HPE WLAN setup, which protocol enables efficient roaming between access points without re-authentication?

802.11r

802.11n

VRRP

LACP

Page 3 of 14

21. When summarizing routes in OSPF, where should route summarization be configured to minimize routing table entries?

On area border routers (ABRs)

On backbone routers

On internal routers

On default gateways

22. Which feature on HPE switches prevents Layer 2 loops by selectively blocking redundant paths between switches?

STP

VRRP

DHCP relay

IGMP

23. Multiple Answers: When troubleshooting EAP-TLS, which two logs are critical for diagnosing authentication issues?

RADIUS server logs

Client-side EAP logs

IP route logs

DHCP binding logs

24. Which command on an HPE switch provides detailed information about all interfaces, including errors and traffic statistics?

show interfaces

show ip route

show mac-address-table

show spanning-tree

25. Multiple Answers: In OSPF, which two areas are configured to limit LSA flooding and reduce routing table sizes?

Stub area

Backbone area

Totally stubby area

Default area

26. Which command provides real-time information about the CPU utilization on an HPE switch, helping to diagnose performance issues?

show cpu

show memory

show usage

show traffic

27. An HPE network uses VRRP for gateway redundancy. If two switches share the same VRRP priority, what additional factor determines the master?

MAC address

Interface speed

VLAN assignment

IP address

28. Multiple Answers: In ClearPass, which two attributes can be used to define access policies based on device identity?

MAC address

Device OS type

IP Source Guard

VLAN ID

29. In a dual-band WLAN environment, what is the advantage of using 5 GHz over 2.4 GHz?

More available channels and less interference

Wider coverage area

Better penetration through obstacles

Higher power requirements

30. When designing a WLAN, what is a key benefit of using 5 GHz channels over 2.4 GHz channels?

Wider coverage

Lower interference

More access points required

Better penetration through walls

Page 4 of 14

31. Multiple Answers: To improve multicast performance in an HPE network, which two features should be enabled?

IGMP Snooping

PIM (Protocol Independent Multicast)

BPDU Guard

DHCP relay

32. Multiple Answers: In a broadcast storm scenario, which two configurations can help limit broadcast traffic on an HPE switch?

Enable Storm Control

Use VLAN segmentation

Enable BPDU filtering

Disable IGMP Snooping

33. What is the purpose of IP Source Guard in a campus network?

To prevent IP address spoofing

To enable VLAN tagging

To aggregate links

To assign IP addresses

34. When deploying a WLAN for voice over Wi-Fi, which factor is most critical to ensure high-quality voice connections?

Low latency

High DHCP lease time

Static IP addresses

High transmit power

35. Which command verifies the operational status of VRRP on an HPE switch, including master and backup roles?

show vrrp

show vlan

show ip route

show interface status

36. Multiple Answers: In an HPE network with ClearPass integration, which two methods can be used to assign network access roles?

Static role assignment

Role-based policies in ClearPass

Dynamic routing

Link Aggregation

37. To influence route selection in OSPF, which parameter can be adjusted to prioritize specific routes?

Route cost

Administrative distance

Route summary

Link aggregation

38. Which protocol allows wireless clients to pre-authenticate with nearby access points, enabling faster transitions between APs?

802.11r

IGMP Snooping

LACP

DHCP relay

39. Multiple Answers: In a campus network using EIGRP, which two configurations can help optimize bandwidth usage and reduce convergence time?

Adjusting the hello and hold timers

Enabling summarization on interfaces

Configuring passive interfaces on links without neighbors

Setting a higher OSPF priority

40. Which command on an HPE switch allows administrators to monitor traffic statistics and identify unusual patterns?

show statistics

show traffic

show interface counters

show logs

Page 5 of 14

41. Multiple Answers: In an HPE WLAN environment, which two RF settings should be adjusted to reduce interference in densely populated areas?

Channel width

Transmit power

DHCP lease time

LACP configuration

42. In a Layer 2 HPE network, which protocol prevents switching loops by blocking redundant paths?

VRRP

Spanning Tree Protocol (STP)

OSPF

IGMP

43. In an HPE network, what is the primary purpose of using server certificate validation in an EAP-TLS setup?

To verify the server’s identity and prevent impersonation

To provide IP addresses to clients

To enable VLAN tagging

To aggregate multiple links

44. Which protocol is best suited for use as an Interior Gateway Protocol (IGP) in a large-scale enterprise network requiring fast convergence?

RIP

BGP

OSPF

EIGRP

45. Multiple Answers: To improve security and prevent attacks on HPE campus switches, which two features are commonly implemented?

DHCP Snooping

Port Security

QoS

LLDP

46. Which HPE technology enables seamless failover by synchronizing configurations between two core switches?

Spanning Tree Protocol (STP)

DHCP Relay

Virtual Switching Extension (VSX)

IP Source Guard

47. In an HPE network, which setting should be enabled on trunk links to ensure multiple VLANs pass seamlessly across redundant connections?

LACP

VLAN tagging

LLDP

MAC filtering

48. Multiple Answers: In an HPE environment, which two configurations enhance resiliency and prevent network-wide downtime?

Redundant power supplies

Dynamic VLAN assignment

Keepalive link in VSX

Static routes

49. In a Layer 3 HPE network, which feature allows multiple paths for routing traffic, increasing redundancy and balancing load?

ECMP

LLDP

DHCP relay

BPDU Guard

50. Multiple Answers: When implementing inter-VLAN routing on HPE switches, which two configurations are necessary for successful communication between VLANs?

Enable IP routing

Configure VLAN interfaces with IP addresses

Enable DHCP relay

Use static ARP entries

Page 6 of 14

51. In an HPE Campus network, which command allows administrators to monitor active interfaces and their link status?

show interface status

show vlan

show ip route

show spanning-tree

52. When implementing inter-VLAN routing on an HPE Layer 3 switch, which configuration is essential for allowing traffic between VLANs?

Enable IP routing

Enable LACP

Enable VLAN pruning

Enable DHCP relay

53. Multiple Answers: In addition to EAP-TLS, which two features enhance port-based security on HPE switches?

Port Security

BPDU Guard

DHCP relay

IP SLA

54. Multiple Answers: To diagnose 802.1X authentication failures, which two log sources should be reviewed?

RADIUS server logs

Switch port-access logs

MAC address table

DHCP binding table

55. Which BGP attribute is used to control the preferred exit path from an AS?

Local Preference

AS-path

MED

Next-hop

56. Which feature on HPE switches helps mitigate MAC spoofing by binding IP addresses to MAC addresses at the port level?

IP Source Guard

MAC Authentication Bypass

Port Security

VLAN tagging

57. In a high-availability network design, which configuration provides gateway redundancy by enabling multiple devices to share a single IP address?

VRRP

LLDP

IP Source Guard

DHCP Snooping

58. In HPE ArubaOS, which feature assigns VLANs dynamically based on the user’s role or credentials?

Dynamic VLAN assignment

Static VLAN tagging

Port mirroring

DHCP relay

59. When configuring OSPF in a multi-area setup, which area type minimizes the number of LSAs and reduces the size of the routing table?

Backbone area

Stub area

Not-so-stubby area (NSSA)

Totally stubby area

60. What is the function of RADIUS accounting in an AAA setup with ClearPass?

To manage IP addresses

To log user access and usage details

To prioritize traffic

To manage VLANs dynamically

Page 7 of 14

61. In an HPE network with VSX enabled, which setting allows for continuous service even if one switch goes offline?

VRRP

VSX LAG

VLAN tagging

STP

62. When a network segment is experiencing slow connectivity, which command shows interface-level error counters that may indicate the cause?

show interfaces counters

show ip route

show spanning-tree

show vlan

63. Multiple Answers: Which two HPE switch features are used to enhance multicast traffic efficiency in Layer 2 networks?

IGMP Snooping

VLAN tagging

IP Source Guard

MLD Snooping

64. To provide high availability for IP addresses in an HPE network, which configuration should be applied on gateway routers?

VRRP

Link Aggregation

DHCP Relay

Static Routing

65. Multiple Answers: To reduce the impact of external interference in an HPE WLAN, which two settings

can be adjusted?

Reduce AP transmit power

Change channels to avoid congested frequencies

Disable band steering

Increase DHCP lease time

66. Which modulation scheme is used in 802.11ac to enhance data rates and provide higher throughput in a WLAN environment?

QPSK

BPSK

256-QAM

16-QAM

67. What is the function of MAC Authentication Bypass (MAB) in an 802.1X-enabled network?

It authenticates non-EAP-capable devices by their MAC addresses

It provides IP addresses

It dynamically assigns VLANs

It disables 802.1X for specific devices

68. When troubleshooting high CPU usage on a switch, which feature may reveal whether the cause is due to control plane traffic?

CPU profiling or monitoring

DHCP Snooping

Port mirroring

Link Aggregation

69. Multiple Answers: To prevent unauthorized devices from gaining network access in an HPE switch environment, which two security features should be enabled?

Port security

BPDU Guard

DHCP Snooping

QoS policies

70. Which feature on HPE switches allows administrators to restrict access based on MAC addresses, enhancing network security?

MAC authentication

PortFast

BPDU Guard

LLDP-MED

Page 8 of 14

71. Multiple Answers: In troubleshooting broadcast storms in an HPE network, which approaches help mitigate the issue?

Enable BPDU Guard

Enable Storm Control

Use VLAN segmentation

Disable DHCP snooping

72. Which protocol operates at Layer 2 to dynamically discover connected devices and support network topology mapping in HPE environments?

LLDP

VRRP

OSPF

LACP

73. When designing an HPE network, which factor is critical to ensure efficient routing convergence?

OSPF timer settings

VLAN ID assignment

DHCP lease time

Port security settings

74. Which protocol should be implemented in an HPE network to mitigate the effects of rogue DHCP servers?

DHCP Snooping

LLDP

VRRP

IGMP Snooping

75. In an HPE network, which protocol allows multiple switches to share the same IP address for redundancy and failover?

VRRP

STP

OSPF

IGMP

76. Multiple Answers: Which two features are critical for maintaining loop-free and stable Layer 2 topologies in HPE campus networks?

Spanning Tree Protocol (STP)

BPDU Guard

VLAN pruning

DHCP Snooping

77. Which protocol enables two HPE Aruba switches to share a virtual IP address, providing gateway redundancy?

STP

LLDP

VRRP

RSTP

78. Multiple Answers: In a Layer 3 HPE network, which two configurations improve redundancy and load balancing for routed traffic?

ECMP

VRRP

DHCP Snooping

IP Source Guard

79. Multiple Answers: In designing a secure HPE network, which two practices help prevent unauthorized access on wired ports?

Enabling 802.1X authentication

Configuring MAC authentication bypass (MAB)

Using DHCP relay

Implementing port security

80. Which log level on HPE switches records events that could lead to serious operational issues if not addressed?

Warning

Debug

Notice

Error

Page 9 of 14

81. In a high-availability HPE network, what ensures that traffic can reroute automatically if a link fails?

Equal-Cost Multi-Path (ECMP)

IP Source Guard

RADIUS authentication

DHCP relay

82. When configuring EAP-TLS, which element must be present on both the client and the server for successful mutual authentication?

Digital certificates

DHCP relay

Port mirroring

QoS policies

83. In an OSPF environment, what is the function of an Area Border Router (ABR)?

To summarize routes between OSPF areas

To increase routing updates

To assign IP addresses dynamically

To prevent route flapping

84. Which feature can be enabled on HPE switches to prevent excessive broadcast traffic in the event of a network loop?

Loop Protection

DHCP Snooping

MAC Filtering

Link Aggregation

85. For Layer 3 redundancy in an HPE environment, which configuration ensures multiple paths are available for traffic distribution?

Static routes

VLAN tagging

ECMP

Port mirroring

86. What is the main benefit of enabling Flow Control on an HPE switch interface?

To prevent packet loss during high traffic loads

To enable VLAN tagging

To increase broadcast domain size

To manage DHCP assignments

87. Which feature on HPE switches dynamically adjusts forwarding rules based on changes in network topology?

STP

VLAN tagging

Port mirroring

DHCP relay

88. In a Layer 3 HPE campus network, which command verifies OSPF route summaries?

show ip ospf database

show ip route

show ip ospf summary-address

show ip interface brief

89. A customer wants to enforce VLAN isolation between different departments in an HPE campus network.

Which feature enables strict control of which VLANs are allowed across trunk links?

VLAN pruning

QoS tagging

MAC filtering

LLDP blocking

90. When troubleshooting poor WLAN performance in a high-interference area, which metric should be reviewed to determine if RF interference is a factor?

Signal-to-Noise Ratio (SNR)

IP address conflicts

DHCP lease time

STP status

Page 10 of 14

91. Multiple Answers: Which configurations are recommended for a secure Layer 2 network to prevent attacks on HPE switches?

Port security

IP Source Guard

LACP

DHCP Snooping

92. If a switch in an HPE network is experiencing high broadcast traffic, which configuration could help reduce this load?

VLAN segmentation

Increase MTU size

Enable LACP

Use IP subnetting

93. When deploying an HPE switch stack, which two settings are critical to verify for redundancy and stable operation?

Stack cables

IP address of each stack member

Firmware consistency across members

DHCP server IP

94. When troubleshooting connectivity issues between HPE switches, which command shows if all required VLANs are allowed on a trunk link?

show vlan

show interface trunk

show ip route

show spanning-tree

95. Which protocol enables HPE switches to participate in multicast group management, controlling multicast traffic within VLANs?

IGMP Snooping

LACP

VRRP

BPDU Guard

96. When using EAP-TLS, what role does the client certificate play?

It authenticates the client to the network

It provides an IP address to the client

It enables static routing

It acts as a firewall

97. In ClearPass, which feature allows network administrators to apply different policies based on user role and device type?

Role-based access control (RBAC)

Static IP configuration

VLAN tagging

Port mirroring

98. In a multi-VLAN HPE network, which protocol enables devices in different VLANs to communicate through a centralized router or Layer 3 switch?

Inter-VLAN routing

DHCP relay

STP

IGMP Snooping

99. Which command on an HPE switch displays the current VLAN configuration, including assigned ports and status?

show vlan

show ip route

show interfaces

show stack

100. What is the main purpose of enabling Storm Control on HPE switches?

To prevent excessive broadcast traffic

To enable VLAN tagging

To route traffic between VLANs

To prioritize traffic

Page 11 of 14

101. What is the purpose of the OSPF dead timer?

To specify the time before declaring a neighbor down

To define the area type

To limit the number of LSAs

To prioritize route summarization

102. When deploying access points in a high-density WLAN, which metric is most important to monitor to avoid channel saturation?

Channel utilization

DHCP lease time

Interface MTU

VLAN priority

103. In an HPE network, which technology prevents loops by selectively blocking redundant paths between switches?

STP

LACP

IP Source Guard

VLAN tagging

104. In a customer deployment, two HPE switches form a VSX pair.

Which setting must be synchronized between them for consistency?

STP settings

VLAN configurations

Port mirroring settings

LLDP neighbor details

105. When implementing VSX on HPE core switches, which setting ensures traffic is distributed across both switches for high availability?

Link Aggregation

VSX LAG

VLAN tagging

IP Source Guard

106. Which protocol at the Network Layer allows for logical address resolution and routing between different subnets?

OSPF

ARP

DHCP

FTP

107. Which feature on HPE switches helps in detecting and controlling excessive broadcast, multicast, and unknown unicast traffic on an interface?

Storm Control

DHCP Snooping

BPDU Guard

IGMP Snooping

108. Multiple Answers: To prevent split-brain scenarios in a VSX configuration, which two configurations are essential?

Keepalive link

VRRP

Redundant VSX links

BPDU Guard

109. In an EIGRP network, what does the feasible successor route represent?

The best backup route to the destination

The primary route to the destination

The route with the highest metric

A route excluded from the routing table

110. When using BGP, which attribute can be adjusted to influence inbound traffic from other autonomous systems?

AS-path

Local Preference

Route map

VLAN tagging

Page 12 of 14

111. When deploying HPE switches in a stacked configuration, what ensures seamless failover between stack members?

LACP

Redundant stack cables

VLAN tagging

DHCP relay configuration

112. If HPE Aruba switches are configured with VSX, which command verifies the status of the VSX connection?

show vsx status

show vlan

show spanning-tree

show stack

113. Multiple Answers: In a scenario where link utilization is high, which two configurations help maximize available bandwidth?

Enable Link Aggregation

Configure ECMP for routing

Enable DHCP relay

Enable MAC Authentication Bypass

114. Multiple Answers: To limit congestion in a 2.4 GHz WLAN, which two configurations are recommended?

Use non-overlapping channels (1, 6, 11)

Enable Dynamic Frequency Selection

Lower the transmit power

Enable port mirroring

115. Multiple Answers: If multiple devices in a VLAN lose connectivity, which two commands are helpful to check VLAN and port status?

show vlan

show interfaces status

show port-access clients

show spanning-tree vlan

116. Multiple Answers: Which two configurations help secure an HPE Layer 2 network by preventing unauthorized devices and limiting broadcast traffic?

Port Security

Storm Control

VLAN tagging

VRRP

117. Which command on an HPE switch provides an overview of all active Layer 3 routes?

show ip route

show vlan

show interfaces

show spanning-tree

118. Multiple Answers: When configuring ClearPass with HPE switches, which two services are commonly enabled for device authorization?

RADIUS accounting

TACACS+ authorization

DHCP relay

Port mirroring

119. Multiple Answers: To improve network reliability in a high-density WLAN, which two configurations should be adjusted?

Enable band steering

Increase AP transmit power

Reduce channel width

Increase DHCP lease time

120. In a dual-band WLAN, why is it beneficial to enable band steering?

It directs clients to the 5 GHz band, which is less congested

It enables VLAN tagging for all devices

It automatically blocks rogue APs

It disables the 2.4 GHz band

Page 13 of 14

121. In a multi-area OSPF setup, what is the role of the backbone area (Area 0)?

To isolate routing domains

To act as a centralized area for inter-area routing

To restrict route updates

To provide external connectivity

122. Which HPE protocol allows for link redundancy by grouping multiple physical connections into a single logical connection?

LACP

IGMP

LLDP

DHCP

123. In ClearPass, which feature allows network access to be granted based on specific time and location conditions?

Adaptive Access Policies

VLAN tagging

Static MAC assignment

Port security

124. When configuring inter-VLAN routing on an HPE switch, what is required to allow traffic between VLANs?

Enable IP routing

Enable DHCP relay

Enable STP

Set up VLAN tagging

125. Which command on HPE switches helps to identify the cause of VLAN propagation failure across a trunk link?

show interface trunk

show vlan

show spanning-tree

show lacp

126. In WLAN environments, what does RSSI (Received Signal Strength Indicator) represent?

Signal strength at the client device

Signal interference level

Maximum data rate

Bandwidth allocation

127. A network administrator notices inconsistent VLAN connectivity across HPE switches in a stack.

Which configuration should be verified?

VLAN tagging on trunk ports

Port security

DHCP Snooping

Interface speed and duplex

128. Multiple Answers: To optimize a WLAN for real-time applications such as voice and video, which two features should be enabled?

Quality of Service (QoS)

Dynamic Frequency Selection (DFS)

IGMP Snooping

Band steering

129. Which OSPF LSA type is generated by an ASBR to advertise external routes?

Type 5

Type 2

Type 1

Type 3

130. When deploying a highly available gateway in an HPE network, which protocol ensures seamless failover for IP addresses?

VRRP

LACP

VLAN tagging

MAC address filtering

Page 14 of 14

131. Multiple Answers: When configuring ClearPass to enforce access policies on an HPE network, which two components are required for user role assignment?

ClearPass Policy Manager

RADIUS server

IP Source Guard

VLAN assignment

132. Multiple Answers: When configuring a switch stack for redundancy, which two configurations should be verified for stable connectivity and high availability?

Redundant stack cables

Consistent firmware versions across stack members

LLDP settings

IP Source Guard

133. Multiple Answers: To prevent VLAN hopping attacks in an HPE campus network, which two configurations should be applied?

Disable unused ports

Use access mode on ports facing end devices

Enable DHCP Snooping

Configure IP Source Guard

TAGS:

HPE7-A06, HPE7-A06 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get HPE7-A06 Dumps Full Version

Q&As: 437
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Valid HPE7-A06 Exam Dumps are Your best Choice to Pass

Related

Posts

Valid HPE0-G03 Exam Dumps are Your best Choice to Pass

HPE0-S59 Online Dumps Boost Your Career

Study Online HPE0-J68 Exam Dumps to Pass

Improve Your Knowledge with HPE2-B01 Exam Dumps

About Us

EMAIL

Services

Opening Hours