Use LEED AP ID+C Dumps to Obtain USGBC Certification

Category:

Comments:

0 Comments

Post Date:

February 5, 2025

If you're serious about obtaining the Leadership in Energy and Environmental Design (LEED) certification, practicing with USGBC LEED AP ID+C dumps questions is a must. By doing so, you'll become familiar with the exam format, identify knowledge gaps, develop time management skills, boost your confidence, and increase your chances of success. So, start practicing LEED AP ID+C exam dumps today and give yourself the best chance of passing the LEED AP ID+C exam! Test free LEED AP Interior Design + Construction (LEED AP ID+C) V4 LEED AP ID+C exam dumps below.

Page 1 of 3

1. What must a project team inventory to determine if a project has enough reused surfaces to document Materials and Resources Credit, Interior Life-Cycle Impact Reduction, Option 1. Interior Reuse?

Demolition waste

Plumbing fixtures

Salvaged furniture

Existing building conditions

2. What should a team focus on first to significantly improve energy performance or achieve the lowest possible operation cost?

Choosing energy efficient systems

Conducting a simple box energy model

Implementing passive design strategies

Performing commissioning of energy systems

3. Which of the following must be considered in order to meet Energy and Atmosphere Prerequisite, Fundamental Refrigerant Management if the tenant requires 24-hour cooling in a server room?

Base-building chiller specifications

CFC-free refrigerants in tenant cooling units

Temperature monitoring of building cooling water

ENERGY STAR® compliant cooling units with low CFCs

4. Which of the following statements is correct when defining the project boundary?

The project boundary must be defined by the limit of construction

The LEED project boundary cannot include more than one building

The gross floor area of the LEED project should be no less than 1,000 ft2 (93 m2)

Contiguous land that is associated with the project that is altered as a result of construction must be included

5. Which of the following is required for a cooling tower and evaporative condenser in the Water Efficiency Prerequisite, Indoor Water Use Reduction?

Alkalinity testing, drift eliminators and energy star rating

Makeup water meters, conductivity controllers and overflow alarms

Non potable water sources, makeup water meters and bacteria testing

Water treatment calculations, overflow alarms and system performance narrative

6. To assess the feasibility of earning Location and Transportation Credit, Reduced Parking Footprint, the project team should be familiar with what local government regulation?

Minimum number of parking spaces required by the local zoning code

Maximum dimensions for on-street parking spaces allowed by the local zoning code

Minimum number of electric vehicle charging spaces required by the local zoning code

Maximum number of levels in structured parking garages allowed by the local zoning code

7. When attempting Regional Priority Credit, Regional Priority what must be provided in the documentation?

Location

Climate zone

ENERGY STAR® score

Heating and cooling degree days

8. What percentage of occupants require individual control of thermal systems under Indoor Environmental Quality, Thermal Comfort?

25%

50%

75%

90%

9. A tenant is targeting LEED Platinum certification and has hired a LEED AP Interior Design and Construction consultant to help identify and use opportunities to achieve synergies across disciplines and building systems.

Which of the following analyses are required to be completed in the Integrated Process Worksheet to achieve an additional point?

Water-Related Systems

Energy-Related Systems

Indoor Air Quality Systems

Waste Management Systems

10. A renovation project includes both a new kitchen sink and shower and an existing lavatory and water closet within the LEED project boundary.

How would the project perform the Water Efficiency Credit, Indoor Water Use Reduction calculations?

Include only the newly installed fixtures and exclude the existing fixtures

Include only the existing fixtures and exclude the newly installed fixtures

Include all fixtures (new and existing); the baseline for the existing fixtures would be the flush/flow rates of the existing fixtures prior to retrofit

Include all fixtures (new and existing); the baseline for the existing fixtures would be the same baseline flush/flow rates used for the new fixtures

Page 2 of 3

11. An owner has expressed concerns to the LEED AP about the costs associated with the integrative process.

How can the LEED AP relieve the owner's concerns?

The LEED AP should explain to the owner that since the integrative process is not a prerequisite, it can be dropped from the project thus cutting back project costs

The LEED AP should explain that while the first costs and the design fees will be higher due to the integrative process, the operational savings will make up for the extra costs

The LEED AP should explain that the integrative process can easily be postponed and reconsidered until after the design for the construction phase, when it will most likely save costs for the project

The LEED AP should explain that the integrative process reduces costs by avoiding delays associated with design changes during the construction document phase and reducing change orders during construction

12. If the client has purchased green power that is not Green-e certified, then the project team should

accept not earning Energy and Atmosphere Credit, Green Power

provide documentation as to how the green power is equivalent to Green-e certified

apply for an Innovation Credit and explain the situation in a narrative

apply the percentage to Energy and Atmosphere Credit, Renewable Energy Generation

13. A project owner requests that additional outside air be provided to the building occupants in order to improve employee health, welfare, well-being and productivity.

However, doing so could make it more difficult to achieve which credit?

Indoor Environmental Quality Credit, Acoustic Performance

Energy and Atmosphere Credit, Advanced Energy Metering

Energy and Atmosphere Credit, Optimize Energy Performance

Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies

14. Discussing the project goals to help identify the credits and options that the team should attempt is an example of

documenting LEED credits

creating the Basis of Design

developing the LEED Scorecard

implementing the Commissioning Plan

15. A mechanical engineer needs to identify spaces that are considered densely occupied according to LEED in order to document

Indoor Environmental Quality Credit, Interior Lighting, Option 2

Indoor Environmental Quality Credit, Thermal Comfort, Control Requirements

Indoor Environmental Quality Credit, Indoor Air Quality Assessment, Option 2. Air Testing

Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies, Option 2

Carbon Dioxide Monitoring

16. Which strategy could be incorporated into the negotiations of a lease agreement between a tenant and building owner to contribute towards earning a LEED credit?

A lease renewal option prior to 10 years

Discounted parking fees for first year of lease

An energy payment plan where the tenant pays a flat rate on utilities through the building owner

Energy purchase through the building owner's campus facility that produces renewable power to Green-e standards

17. In a goal-setting workshop, a decision is made to place circulation at the exterior of the office perimeter next to the window wall.

Which of the following is an example of integrated decision-making?

Installing blinds to increase occupant comfort

Darkening the color of the carpet along the perimeter to aid way-finding

Lowering the heating set-point in the circulation space to conserve energy

Issuing user guidelines which limit the height of occupant additions to cubicles along the perimeter

18. In addition to the basic requirements for Energy and Atmosphere, Fundamental Commissioning and Verification, which is required to achieve Energy and Atmosphere, Enhanced Commissioning, Option 1?

Develop and implement a commissioning plan

Review the contractor's submittals for compliance with design documents

Verify the installation and performance of the systems being commissioned

Review the owner's requirements and the basis of design for clarity and completeness

19. In a goal-setting workshop, a project team identifies that teleworking could reduce building area and therefore the required plug loads.

What is a requirement for the documentation of the energy-related systems of the Integrative Process worksheet?

Providing a narrative of one plug load reduction

Providing calculations of only the plug load reduction

Providing explanations of at least two plug load reduction strategies

Providing detailed comparative energy model before completing schematic design to evaluate energy load reduction strategies

20. For Energy and Atmosphere Prerequisite, Fundamental Commissioning (Cx) and Verification, the final Cx report must include the

Corrective Action Plan

Thermal Comfort Survey

functional performance tests

mechanical drawings showing all equipment installed

Page 3 of 3

21. Which systems must be commissioned to earn Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification?

Fire suppression

Irrigation controls

Building Envelope

Daylighting controls

22. Design is underway for a new tenant suite with 4,000 ft2 (371.6 m2) of net occupiable are a. The project build-out will include all new HVAC systems.

Operable windows are installed as follows:

・ A total 75 ft2 (7.0 m2) located within 15 ft. (4.6 m) of all spaces

. A total 50 ft2 (4.6 m2) located within 25 ft. (7.6 m) of all spaces

Which design and documentation strategies must be used to demonstrate compliance with Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance?

Tabulate the total area of operable windows to indicate compliance. No mechanical outside air systems required for space HVAC design

Provide MERV 13 (F7) filters on the new HVAC system air handling units. No mechanical outside air systems required for space HVAC design

Provide new mechanical outside air systems in compliance with ASHRAE 62.1-2010 and document compliance by tabulating rates in compliance with the standard

Install 25 ft2 (2.3 m2) of new operable windows within 25 ft. (7.6 m) of all spaces and tabulate the total area of operable windows to indicate compliance

23. A project has performed an energy model which has resulted in the following energy end use consumption:

To meet the requirements for Energy and Atmosphere Credit, Advanced Energy Metering, Option 2. Advanced Metering, energy meters must be installed for energy end uses in

space cooling, interior fans and receptacles

interior lighting, space heating, space cooling and interior fans

interior lighting, space heating, space cooling, interior fans and receptacles

exterior lighting, interior lighting, space heating, space cooling, interior fans, service water heating and receptacles

24. Which of the following would achieve an exemplary performance credit?

Conducting two goal setting workshops

Demonstrating a 55% potable water savings

Achieving an 80% parking capacity reduction

Signing a one-year contract for renewable energy

25. 1.The project team for a bank project located in a mall is wondering whether they can earn Location and Transportation Credit Surrounding Density and Diverse Uses, Option 2. Diverse Uses.

When evaluating a map of nearby diverse uses, which of the following would you recommend to be entered in the calculation?

Health club, Laundromat, Post office, Restaurant

Hair salon, Movie Theater, Pharmacy, Restaurant

Clothing store, Commercial office, Eye doctor, Supermarket

Convenience store, Furniture store, Hardware store, Pharmacy

26. The WaterSense label or local equivalent requirement in Water Efficiency Prerequisite, Indoor Water Use Reduction ensures that eligible newly installed plumbing fixtures will

be advertised as LEED compliant

be both water efficient and high performing

comply with mandatory federal government regulations

comply with all international plumbing system requirements

27. A project has access to two alternative water sources.

How should they determine which source to use where?

A project may not use two alternative water sources

Target the uses that require the least treatment first, such as toilet flushing or irrigation

Match uses by location: indoor sources to indoor uses, outdoor sources to outdoor uses

All sources should be treated to potable water standards and used to supplement the municipal supply

28. A 1,500 ft2 (139 m2) mobile home is built in the downtown area of a major city. 90% of the project's gross floor will be completed by the time of occupancy. LEED certification is being sought.

Which rating system would be the most appropriate one to use?

LEED Interior Design and Construction

LEED Building Design and Construction

LEED for Homes

No rating system

29. For a bicycle network to demonstrate compliance with Location and Transportation Credit, Bicycle Facilities, the bicycle network must connect to

five bicycle trails

at least eight diverse uses

a restaurant, a grocery shop, a church and two bus lines

a rapid transit stop that is within 3 mi. (5 km) biking distance of the project boundary

30. A project incorporates steel beams as an interior architectural feature, but no recycled content information is available.

When calculating the recycled content of the beams, which default content amount should be used?

10%

15%

20%

25%

TAGS:

LEED AP ID+C, LEED AP ID+C exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get LEED AP ID+C Dumps Full Version

Q&As: 100
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Use LEED AP ID+C Dumps to Obtain USGBC Certification

Related

Posts

2024 USGBC LEED AP ND Exam Dumps Questions

LEED AP BD+C Dumps Questions Increase Your Chance of Success

Good LEED Green Associate Exam Dumps Save Your Preparation Time

About Us

EMAIL

Services

Opening Hours