2V0-11.25 Exam Dumps - Reliable Way to Pass and Get Certified

2V0-11.25 Exam Dumps – Reliable Way to Pass and Get Certified

Category:

Comments:

0 Comments

Post Date:

April 1, 2025

If you are looking for a reliable and comprehensive way to prepare for your 2V0-11.25 certification exam, look no further than 2V0-11.25 exam questions. These 2V0-11.25 exam dumps questions are designed to help you assess your knowledge, identify your strengths and weaknesses, and improve your chances of passing the exam on the first try. These 2V0-11.25 dumps questions cover all the topics and concepts that are essential for the 2V0-11.25 exam, so you can be sure that you are fully prepared. Test Vmware 2V0-11.25 free dumps below.

Page 1 of 7

1. An administrator needs to delete and re-deploy an NSX Edge cluster that was originally deployed from SDDC Manager and has downloaded the edge cleaner tool.

Where should the administrator run the tool to complete this task?

On the NSX Manager V

On the SDDC Manager V

On the Edge cluster node VM(s).

On the Cloud Builder V

2. An organization has experienced performance issues and requires a detailed analysis of infrastructure performance, capacity, utilization, and compliance using VMware Aria components.

What three steps should be followed to generate and analyze these reports? (Choose three.)

Create custom dashboards to monitor performance metrics

Use Aria Operations for Logs to correlate log data with performance

Access Aria Operations and navigate to the Reports section

Export the reports for further analysis and compliance verification

Run predefined reports on capacity and utilization

3. An administrator has deployed a new VMware Cloud Builder appliance using the downloaded OVF file. While attempting to use the VMware Cloud Builder interface, the administrator discovers that no connection can be established to the appliance.

Which three configuration errors may have occurred? (Choose three.)

VLAN misconfiguration.

Incorrect DNS settings or inaccessible DNS servers.

Incorrect NTP settings or inaccessible NTP servers.

Incorrect Static IP configuration.

BGP routing misconfiguration.

Incorrect Dynamic IP configuration.

4. During the deployment of a VI workload domain using SDDC Manager, an administrator encounters issues with host configuration.

Which three steps should be followed to troubleshoot and resolve the configuration issues? (Choose three.)

Restart the SDDC Manager appliance to reset configurations.

Reconfigure the NSX Edge nodes.

Check the compatibility of the hardware with VMware Cloud Foundation requirements.

Ensure that all ESXi hosts have the correct version of ESXi installed.

Verify that all ESXi hosts are connected to the management network.

5. Match the VMware Cloud Foundation components with their roles.

VMware Cloud Foundation Component:

A) vSAN

B) vSphere

C) NSX

D) vRealize Automation

Role:

1) Networking and Security

2) Compute and Virtualization

3) Storage Management

4) Cloud Management and Automation

A) vSAN -> 2) Compute and Virtualization B) vSphere -> 4) Cloud Management and Automation C) NSX -> 3) Storage Management D) vRealize Automation -> 1) Networking and Security

A) vSAN -> 4) Cloud Management and Automation B) vSphere -> 2) Compute and Virtualization C) NSX -> 1) Networking and Security D) vRealize Automation -> 3) Storage Management

A) vSAN -> 1) Networking and Security B) vSphere -> 2) Compute and Virtualization C) NSX -> 3) Storage Management D) vRealize Automation -> 4) Cloud Management and Automation

A) vSAN -> 3) Storage Management B) vSphere -> 2) Compute and Virtualization C) NSX -> 1) Networking and Security D) vRealize Automation -> 4) Cloud Management and Automation

6. When configuring Hybrid Linked Mode, which of the following must be completed? (Choose two)

Configure a single vCenter

Enable multi-cluster management

Create a shared domain

Deploy multiple NSX Edge nodes

7. What is the correct sequence of steps when planning the deployment of a VMware Cloud Foundation SDDC?

A) Validate the prerequisites for the deployment

B) Deploy the VMware Cloud Builder appliance

C) Deploy and configure the management domain

D) Validate the successful deployment of the VMware Cloud Foundation SDDC

B, A, D, C

A, B, C, D

A, B, D, C

B, C, A, D

8. What is the first step in the lifecycle management process of VMware Cloud Foundation?

Initiate patch management

Run health diagnostics

Deploy the VMware Cloud Foundation appliance

Add ESXi hosts to the domain

9. When deploying VMware Cloud Foundation using SDDC Manager, which two configurations need to be performed?

Backup configuration for management domain components

Configure VMware NSX Advanced Load Balancer

Validate SSL certificate management for VMware Aria Suite components

Set up Service Accounts for VMware Cloud Foundation

10. Which VMware vSphere feature provides the ability to define and apply datastore capabilities to ensure virtual machines meet specific performance and availability requirements?

Storage Policy Components

Storage Policies

Performance Service

Host Profiles

Page 2 of 7

11. A specific VM is unable to communicate with other VMs in the same network. An administrator needs to identify and resolve the network connectivity issue.

What three steps should the administrator follow? (Choose three.)

Verify the port group settings and VLAN configuration

Use the ESXi command line to check the status of the VM Kernel adapter

Verify that the VM is connected to the correct port group

Check the network adapter settings in vCenter Server

Restart the VM to reset its network connections

12. What is a required step when configuring VMware Cloud Foundation management domain?

Ensure that at least 2 vCenter Servers are deployed

Deploy the VMware Cloud Builder appliance to prepare for deployment

Configure VMware NSX manually before deployment

Set up vSAN prior to deploying the management domain

13. What is the correct sequence of steps for implementing VMware Cloud Foundation with VMware NSX?

A) Deploy VMware Cloud Foundation

B) Configure VMware NSX Manager

C) Configure the VMware NSX Edge

D) Integrate VMware NSX with VMware Cloud Foundation

A, B, D, C

A, B, C, D

B, A, D, C

C, A, B, D

14. vSAN

Role:

A. Manages lifecycle and upgrade of VMware Cloud Foundation

B. Handles virtual machine networking and network virtualization

C. Manages the VMware environment and hosts

D. Provides distributed storage across VMware hosts

A. 1 - D

2 - B

3 - A

4 - D

B. 1 - C

2 - A

3 - D

4 - B

C. 1 - B

2 - D

3 - C

4 - A

D. 1 - A

2 - B

3 - C

4 - D

15. In the context of troubleshooting NSX issues in VMware Cloud Foundation, which of the following should be done first?

Reinstall NSX Manager

Verify network configuration for NSX components

Perform a firmware upgrade on NSX Edge devices

Check the vCenter Server logs for NSX-related errors

16. Which of the following steps are necessary to enable vSphere with Tanzu within VMware Cloud Foundation? (Choose two)

Configure an Overlay network for the control plane

Deploy the Tanzu Kubernetes clusters manually

Configure the NSX Edge cluster to allow Kubernetes workloads

**Enable Workload Management in vCenter Server

17. DRAG DROP

Arrange the steps in the correct order to generate a performance report in Aria Operations.

18. When configuring vSAN in a VMware Cloud Foundation environment, which of the following tasks should be performed?

Create vSAN policies for performance and availability

Install vSAN hardware drivers on each host

Configure storage networking between all nodes

Enable data deduplication and compression

19. Which component within VMware Cloud Foundation is responsible for monitoring the health of the infrastructure?

vSAN Manager

vSphere HA

SDDC Manager

vRealize Operations

20. What is the first step in downloading the vSphere CLI tools to a developer workstation?

Install a compatible version of Java Runtime Environment

Visit the VMware Downloads page and locate the vSphere CLI tools.

Configure the workstation's network settings to connect to the vSphere environment.

Page 3 of 7

21. Which two VMware Cloud Foundation solutions are used for managing the lifecycle of VMware environments? (Select two)

SDDC Manager

vRealize Automation

vCenter Server

VMware HCX

22. Which SDDC Manager component is responsible for upgrading VMware Cloud Foundation?

Update Bundles

Maintenance Mode

VMware Aria Suite Lifecycle

vSphere Lifecycle Manager

23. Which two components are involved in scaling a VMware Cloud Foundation (VCF) environment?

Adding vCenter servers

Scaling the workload domains

Adding hosts to an existing cluster

Configuring NSX load balancer

24. Which of the following is an important consideration when designing the networking requirements for VMware Cloud Foundation?

Selecting only one NSX Edge cluster for simplicity

Defining an overlay network for virtual network traffic

Disabling vSphere Distributed Switches (VDS)

Using only physical network switches for cloud workloads

25. When managing VMware Cloud Foundation, what is the first step to configure vSAN storage policies?

Define resource pools for vSAN storage

Deploy a vSAN datastore

Create a vSphere cluster for workload management

Configure network settings for vSAN traffic

26. Which two of the following are critical elements when planning the VMware vSAN storage configuration for VMware Cloud Foundation? (Select two)

Ensuring that vSAN is configured to provide storage redundancy for workloads

Limiting the number of storage clusters to reduce complexity

Configuring a minimum of three vSphere hosts in each vSAN cluster for redundancy

Storing all backup data on local disks only

27. What is the primary benefit of using NSX Advanced Load Balancer in VMware Cloud Foundation?

Centralized backup management

Optimized performance across cloud workloads

Simplified virtual machine provisioning

Automated disaster recovery configurations

28. Which components are involved in deploying a VMware Cloud Foundation management domain? (Select two)

vSphere vCenter

vRealize Automation

vSAN storage

NSX-T

29. What is the primary benefit of enabling Workload Management on a vSphere Cluster?

It integrates vSphere with third-party cloud providers.

It enhances the security of the vSphere environment.

It allows the deployment of traditional VMs with enhanced performance.

It enables the use of Kubernetes for container orchestration on the vSphere platform.

30. What is the primary use case for Aria Operations within the VMware Aria Suite?

To manage and analyze log data from various sources

To enable network virtualization and security.

To automate workload deployments across multiple cloud environments.

To provide comprehensive monitoring, analytics, and performance management of the cloud infrastructure.

Page 4 of 7

31. Which of the following are key tasks when performing day-2 operations in VMware Cloud Foundation? (Choose two)

Configure backup schedules for VMware Cloud Foundation components

Create and assign roles to users for secure access control

Perform daily health checks of the NSX and vSAN configurations

Upgrade VMware Cloud Foundation components using the SDDC Manager

32. Which two components are required to enable Workload Management in VMware Cloud Foundation? (Select two)

Overlay network

vCenter Server instance

vSphere Distributed Switch

NSX-T Edge device

33. An administrator needs to configure an ESXi host and create a host profile to ensure consistent configuration across multiple hosts in a cluster.

Which three steps are necessary to achieve this? (Choose three.)

Configure the desired settings on a reference ESXi host.

Extract the host profile from the configured reference host.

Manually configure each host to match the reference host settings.

Remediate the non-compliant hosts to ensure they match the host profile.

Apply the host profile to all hosts in the cluster.

34. Configure the VMware Cloud Foundation management domain

1, 2, 3, 4, 5

3, 1, 4, 2, 5

5, 3, 2, 4, 1

3, 2, 1, 4, 5

35. What is the primary purpose of configuring VM storage policies in a VMware vSphere environment?

To manage network traffic between VMs.

To enforce specific storage requirements such as performance, availability, and redundancy.

To configure CPU and memory reservations for VMs.

To automate the backup of virtual machines.

36. Which tool is primarily used to analyze logs for VMware Cloud Foundation?

vSphere Client

vRealize Log Insight

vCenter Server

NSX Manager

37. Which two of the following actions are necessary when troubleshooting vSphere HA issues in VMware Cloud Foundation? (Select two)

Check the status of DRS

Verify the vSphere HA settings for the cluster

Reboot the ESXi host

Examine the host logs for HA-related errors

38. VMware Cloud Foundation APIs

A) Provides network virtualization and security features

B) Automates the deployment and lifecycle management of components

C) Manages storage resources and policies

D) Allows integration and communication with third-party solutions

1 - A: NSX provides network virtualization and security features. 2 - C: vSAN manages storage resources and policies. 3 - B: SDDC Manager automates the deployment and lifecycle management of components. 4 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions.

1 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions. 2 - B: SDDC Manager automates the deployment and lifecycle management of components. 3 - A: NSX provides network virtualization and security features. 4 - C: vSAN manages storage resources and policies.

1 - C: vSAN manages storage resources and policies. 2 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions. 3 - A: NSX provides network virtualization and security features. 4 - B: SDDC Manager automates the deployment and lifecycle management of components.

1 - B: SDDC Manager automates the deployment and lifecycle management of components. 2 - C: vSAN manages storage resources and policies. 3 - A: NSX provides network virtualization and security features. 4 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions.

39. Which two of the following are important factors when designing VMware Cloud Foundation for cost optimization? (Select two)

Selecting the highest number of ESXi hosts possible for all workload domains

Ensuring that storage and compute resources are efficiently allocated to meet specific business needs

Minimizing virtual machine performance by restricting resource allocation

Automating resource scaling based on real-time demand

40. Which feature of VMware Lifecycle Manager allows an administrator to manage the lifecycle of ESXi hosts by applying a consistent image across the hosts in a cluster? (Choose three.)

Configure a Key Management Server (KMS) and add it to vCenter

Create an encryption policy in vCenter.

Enable SSH on the ESXi hosts to manage encryption keys.

Enable the encryption feature on the ESXi hosts.

Apply the encryption policy to the existing VMs.

Page 5 of 7

41. Which of the following VMware Cloud Foundation components is used to manage and automate workload migrations between private and public clouds?

VMware vSAN

VMware HCX

VMware Horizon

VMware Cloud Builder

42. Which two configurations must be considered when scaling an NSX Edge Cluster in VMware Cloud Foundation?

Ensure that the vCenter Server is set to HA mode

Verify the BGP configuration for route propagation

Add or remove edge transport nodes

Ensure that storage policies are properly assigned

43. When commissioning new hosts in VMware Cloud Foundation, which three parameters must be provided? (Choose three.)

Network Pool Name

Storage Type

Hardware Type

SSO Domain Name

ESXi Version

Username

44. In VMware Cloud Foundation, what is the primary function of vSphere Networking when managing NSX components?

Provision virtual machines within the NSX network

Configure the network to support workload mobility

Manage network segmentation for storage resources

Enable vSphere Distributed Switch for external access

45. Which of the following prerequisites are required to deploy VMware Aria Suite Lifecycle in VMware Cloud Foundation? (Select two)

vCenter Server must be configured for multi-tenancy

Network and storage resources must be allocated

vSphere IaaS control plane must be enabled

Backup and recovery configurations must be set up

46. An administrator is tasked with migrating a set of virtual machines between data centers using HCX.

To minimize downtime and ensure data consistency, which two HCX migration options should be considered? (Choose two.)

HCX Replication Assisted vMotion (RAV)

HCX Network Extension

HCX Bulk Migration

HCX Cold Migration

HCX vMotion

47. After deploying the VMware Cloud Foundation management domain, an administrator needs to configure backup for the components within the domain.

Which two steps are involved in configuring the backup of VMware Cloud Foundation management components? (Choose two.)

Configure an external SFTP backup repository on the SDDC Manager.

Manually export the NSX configuration to the SDDC Manager.

Enable the vCenter Server snapshot manager on the SDDC Manager.

Install a third-party backup solution on each ESXi host.

Create a backup schedule on the SDDC manager to automate taking regular backups.

48. Which two VMware Aria Suite components are used for managing the lifecycle of cloud resources in VMware Cloud Foundation? (Select two)

VMware Aria Operations

VMware Aria Automation

VMware Horizon

VMware HCX

49. The administrator of a VMware Cloud Foundation environment notices that log data from multiple components, including vSphere, NSX, and vSAN, is not being collected properly in Aria Operations for Logs.

What two steps should the administrator perform to resolve this issue? (Choose two.)

Check the network connectivity between the Aria Operations for Logs server and the VMware Cloud Foundation components.

Increase the storage capacity of the Aria Operations for Logs server to accommodate more log data.

Reconfigure the log level settings on all vSphere components to ensure detailed logging.

Verify that the Aria Operations for Logs license is still valid and active.

Ensure that the syslog configuration on each ESXi host is pointing to the correct Aria Operations for Logs server.

50. In a VMware Cloud Foundation deployment, which component must be configured first before starting the installation of VMware Aria Suite Lifecycle?

NSX Manager

vCenter Server

vSAN

vSphere

Page 6 of 7

51. Which of the following are valid tasks for performing Day 2 Operations within VMware Cloud Foundation? (Choose two)

Update certificates

Deploy new NSX Edge clusters

Scale the vSAN datastore

Configure Backup and Restore for workloads

52. What is the recommended method for managing IP address allocation for VMware ESXi hosts in a VMware Cloud Foundation environment?

Static IP address assigned using VMware NSX IP Pools

Dynamic IP addresses assigned via DHCP with reservations

Static IP addresses assigned manually

Dynamic IP addresses assigned via DHCP and without any reservations

53. An organization is looking to streamline its IT service delivery by automating the deployment of applications and infrastructure across its hybrid cloud environment.

Which VMware Aria Suite component should they use?

Aria Operations for Networks

Aria Operations

Aria Operations for Logs

Aria Automation

54. In VMware Cloud Foundation, when scaling a workload domain, what is required for network configuration?

Add an additional storage device for the workload domain

Configure NSX Edge appliances for network segmentation

Ensure network connectivity to the primary management domain

Configure additional IP blocks for each new workload domain

55. An administrator's passwords for their NSX 'root', 'admin', and 'audit' accounts in the Cloud Foundation management domain expired. The administrator logged into the NSX Manager console and changed the passwords for all three accounts. The passwords are now showing a status of "Disconnected" in the SDDC Manager UI.

In order to correct this issue, how can SDDC Manager be updated with the new passwords?

In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Rotate.

In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Sync.

In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Remediate.

56. An administrator needs to ensure that network traffic is protected from interception and tampering during VM migration activities.

What feature or setting should the administrator enable to achieve this?

Encrypted vSphere vMotion

vSphere Virtual Machine Encryption

vSphere DRS

vSphere HA

57. While deploying a new VMware Cloud Foundation environment, a cloud administrator validates the information entered into the Deployment Parameter Workbook. The validation action results in an error and the VMware Cloud Builder GUI error message does not identify the cause.

Which logfile can the administrator use to identify the cause of the validation error?

VMware SDDC Manager appliance - vcf-deployment-debug.log

VMware Cloud Builder appliance - vcf-bringup-debug.log

VMware SDDC Manager appliance - vcf-bringup-debug.log

VMware Cloud Builder appliance - vcf-deployment-debug.log

58. When planning a workload migration to VMware Cloud Foundation, what is a crucial factor to evaluate before proceeding?

Virtual machines should not exceed 8 vCPUs for migration

The on-premises data center and VMware Cloud Foundation should share the same cloud provider

The migration should ensure that network connectivity is available to all necessary resources

Storage should always be migrated first before the virtual machines

59. An administrator is tasked with performing password rotation for VMware Cloud Foundation components managed by SDDC Manager.

Which action must be taken to complete this task?

Use the Async Patch CLI Tool to rotate passwords for all components.

Schedule a maintenance window to rotate the passwords to minimize disruption.

Manually update the passwords in vCenter Server and NSX Manager.

Access the SDDC Manager UI and navigate to the password management section.

60. When configuring NSX Edge for a VMware Cloud Foundation deployment, which two components must be configured?

Uplink interfaces for NSX Edge

BGP routing settings

ESXi hosts

vSAN datastores

Page 7 of 7

61. Which of the following is an important consideration when implementing VMware Cloud Foundation with VMware Aria Operations?

Ensuring compatibility with only vSphere environments

Understanding the cost of network configurations

Enabling continuous monitoring and optimization of infrastructure

Configuring VMware Cloud Foundation for use with physical hardware only

62. Which components are involved when deploying a VI Workload Domain in VMware Cloud Foundation? (Choose two)

SDDC Manager

VMware NSX Edge

Tanzu Kubernetes Cluster

vCenter Server

63. When troubleshooting vSAN performance in VMware Cloud Foundation, which two metrics are important to monitor? (Select two)

Latency

CPU usage

Disk health

Memory consumption

64. Which of the following are considered valid prerequisites for deploying a vSphere IaaS Control Plane within VMware Cloud Foundation? (Choose two)

NSX Manager setup

Tanzu Supervisor cluster configuration

Network Overlay configuration

VMware vSAN setup

65. An administrator is tasked with deploying a new application that requires both virtual machines and containers.

Which two components of VMware Cloud Foundation would be utilized to provide a unified platform for managing these workloads? (Choose two.)

Aria Operations

IaaS Control Plane

HCX

NSX

Aria Suite Lifecycle

66. A host in a vSphere environment needs to be taken offline for hardware maintenance. An administrator needs to put the host in maintenance mode without causing VM downtime.

What three steps should the administrator follow? (Choose three.)

Select the "Fractional data migration" option

Migrate all VMs off the host using vMotion

Verify that no VMs are running on the host before maintenance

Select the host and enter maintenance mode from the vSphere Client

Ensure that the host is not part of a vSphere HA cluster

67. Which of the following best practices should be followed when troubleshooting VMware Cloud Foundation SDDC Manager issues?

Reboot the entire SDDC Manager

Use the ‘sos’ CLI tool to collect logs

Check the vSphere HA settings for faults

Remove and reinstall SDDC Manager components

68. Which option should be chosen when placing a vSAN host into maintenance mode to ensure all data remains accessible during maintenance, while minimizing the time required to complete the operation?

Quick Migration

No Data Migration

Ensure Accessibility

Full Data Migration

TAGS:

2V0-11.25, 2V0-11.25 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get 2V0-11.25 Dumps Full Version

Q&As: 139
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

2V0-11.25 Exam Dumps – Reliable Way to Pass and Get Certified

Related

Posts

Vmware 5V0-33.23 Exam Questions Simulate Actual 5V0-33.23 Exam

Prepare 2V0-12.24 Exam with Using 2V0-12.24 Dump Questions

Pass 2V0-13.24 Exam to Get Vmware Certification

2V0-91.22 Online Dumps Boost Your Career

About Us

EMAIL

Services

Opening Hours