Advance Your Career by Using Online D-PSC-MN-01 Dumps

Obtaining the Dell Storage D-PSC-MN-01 certification can help you demonstrate your expertise in DELL EMC solutions and advance your career in related industry. Using D-PSC-MN-01 dumps as part of your study plan can help you identify knowledge gaps, improve your exam-taking skills, provide immediate feedback, and increase your chances of passing the D-PSC-MN-01 exam. DELL EMC D-PSC-MN-01 exam free dumps questions are available below.

Page 1 of 4

1. What type of NIC is used for the external network on a Dell EMC PowerScale F600 node?

1 GbE

10 GbE

25 GbE

40 GbE

 Loading...

2. What are the three phases of Dell EMC PowerScale implementation?

Implementation, Functional review, Handover

Implementation, Documentation, Handover

Planning, Implementation, Handover

Planning, Implementation, Acceptance

 Loading...

3. What accurately describes the InfiniBand cable support?

Supports QSFP to QSFP cabling only

Supports QSFP to QSFP cabling or QSFP to CX4 cabling

Supports QSFP to CX4 cabling only

Supports front-end customer external traffic

 Loading...

4. What is the purpose of SolVe Desktop?

Gather logs from the cluster for analysis

Perform pre-upgrade checks on the cluster

Provide centralized access to step-by-step procedures

Provide access to the latest OneFS codes and firmware upgrades

 Loading...

5. A platform engineer connected to a Dell PowerScale F600 node using a serial connection. The session is unresponsive.

What action must the engineer take?

Restart the server using the front panel power button.

Check the settings of the serial connection.

Replace the serial cable with a new one.

Update the node firmware to the latest release

 Loading...

6. A platform engineer is connecting a new Dell EMC PowerScale F600 node to the back-end switch.

How should the back-end cable be connected?

From PCIe slot 3 to the back-end InfiniBand switch.

From PCIe slot 1 to the back-end Ethernet switch.

From PCIe slot 1 to the back-end InfiniBand switch.

From PCIe slot 3 to the back-end Ethernet switch.

 Loading...

7. A platform engineer cables, powers up, and creates a new cluster of F600 nodes. While performing verification checks, no clients can access the cluster and the engineer cannot ping the nodes.

What is the probable issue?

Manual reboot was not done following the cluster join.

Network was connected to the F600 rNDC ports.

Nodes were connected to the management ports.

Internal network was cabled improperly.

 Loading...

8. What is the rack size of an F600 node?

3U

2U

1U

4U

 Loading...

9. An engineer runs ini_reformat_node command.

What are they attempting to do?

Reformat the mirrored FEC data.

Reformat a node quickly to repurpose a node.

Reformat the mirrored journals.

Reformat a node to securely erase all data.

 Loading...

10. What type of upgrade on a Dell PowerScale cluster requires the least amount of time?

Simultaneous

Parallel

Rolling

Automatic

 Loading...

Page 2 of 4

11. When a platform engineer disconnects and removes the power supply from a Dell EMC PowerScale Gen 6 node, they see an LED on the inside of the compute module.

What does the LED indicate?

Power supply was not removed correctly and the node is shutting down.

Platform engineer has exactly two minutes to swap the power supply.

Visible LED is from the front panel of the node.

Pair node is supplying redundant power.

 Loading...

12. What should the platform engineer do to retain critical information when replacing a system board on a Dell EMC PowerScale F200 node?

Run isi_node_restore -force

Flash the BIOS

Reinstall the PowerScale license

Run EasyRestore

 Loading...

13. A platform engineer must install several Dell PowerScale clusters.

Which rack should they use for the A3000 nodes?

Titan-HD

Titan-D

Titan-P

 Loading...

14. Which port slot provides management functionality on a PowerScale F600?

PCle slot 3

PCle slot 1

rNDCstot

PCle slot 2

 Loading...

15. What type of NIC can be used for the external network on a Dell PowerScale F600 node?

1/10 GbE

10/100 GbE

10/25 GbE

25/40 GbE

 Loading...

16. A platform engineer needs to run some commands on Node 2 of a Dell EMC PowerScale cluster.

Which command can they use to get the external IP address of Node 2, regardless of what node they are currently logged on to?

isi status -q

isi network external view

isi status -p

isi network subnets list

 Loading...

17. DRAG DROP

A platform engineer is creating a Dell PowerScale cluster using the Configuration Wizard. They have selected the Create a new cluster option.

What Is the correct sequence of steps to create the cluster?

 Loading...

18. Which slot on the R640 hardware is used for front-end connectivity on a Dell EMC PowerScale F600 node?

PCIe Slot 3

rNDC Slot

PCIe Slot 1

PCIe Slot 2

 Loading...

19. A customer received replacement parts from Dell without prior communication.

Why did they receive the replacement parts?

The cluster is configured with Secure Remote Services only.

The cluster is enrolled in the AutoCRU program.

The cluster is configured with SC

The cluster is configured with SupportAssist only.

 Loading...

20. Which items are FRUs on a Dell EMC PowerScale Gen 6.5 node?

SSD, power supply, and front-end NIC

DIMM, system battery, and front-end NIC

DIMM, back-end NIC, and SSD

DIMM, back-end NIC, and power supply

 Loading...

Page 3 of 4

21. A platform engineer has built the rack for a Dell EMC PowerScale cluster. While unpacking the components, the engineer notices that the ShockWatch meter has been activated.

Deactivate the ShockWatch meter

Reset the ShockWatch meter

Contact Dell EMC PowerScale Technical Support

Proceed with unpacking the components

 Loading...

22. Which model is a part of the Isilon Gen6 platform?

F600

F810

F900

F200

 Loading...

23. What can be viewed using the isi_upgrade_logs _s command?

A. Post upgrade errors

B. Current upgrade state

C. Active upgrade errors

D. Upgrade assessment results

 Loading...

24. A customer is planning to expand a Dell PowerScale Gen5 cluster with H500 nodes What is a consideration?

A minimum of three H500 chassis are needed.

All new nodes must be on the network.

A minimum of four H500 nodes are needed.

A minimum of one H500 chassis is needed.

 Loading...

25. An engineer replaced a failed node in a PowerScale H500 due to hardware issues. They must verity that the replacement node is functioning correctly.

What is a crucial step when replacing the failed node in the cluster?

Run a diagnostic test on the replacement node.

Confirm that the replacement node inherits the old serial number from the cluster.

Verify the size of the storage capacity of the replacement node.

Power on the replacement node and ensure it connects to the network without any problems.

 Loading...

26. A platform engineer is installing a Dell EMC PowerScale cluster with 12 F200 nodes.

What is the correct ratio used for the breakout cable?

1:2

1:4

1:8

1:10

 Loading...

27. What is the required minimum number of PowerScale P100 and Bl 00 Accelerator nodes to add to a PowerScale cluster?

2

4

1

3

 Loading...

28. An implementation engineer is connecting new Dell EMC PowerScale F600 nodes to the backend.

What network speeds are supported for the backend?

10 GbE or 40 GbE

10 GbE or 25 GbE

25 GbE or 100 GbE

25 GbE or 40 GbE

 Loading...

29. Which cluster interface provides the most detailed network traffic statistics and enables file and directory operations on the cluster?

Web console

Serial console

Platform API

CLI

 Loading...

30. What is an important consideration when connecting Dell PowerScale Gen6 nodes to external power?

A. Cable each node in a node pair to a different PDU.

B. Cable all nodes to the external power feeds before connecting switch power cables.

C. The total power load for all nodes in the rack should not exceed 100% of the branch circuit rating.

D. Connect both cables of each node to different external power feeds.

 Loading...

Page 4 of 4

31. What type of privileges are required to perform tenant-specific administration?

Zone role-based access control

System root privileges

System admin privileges

Role-based access control

 Loading...

32. What should the platform engineer pre-check when installing Dell EMC PowerScale Gen 6 nodes in a customer-provided rack?

PDUs are located on opposite sides of the rack

Rack is leveled using the front legs first and the rear legs second

Rack has full earth ground and is properly bolted to the floor

Rack has a minimum of two PDUs

 Loading...

 Loading...