Advance Your Career by Using Online NACE-CIP2-001 Dumps

Obtaining the CIP Level 2 NACE-CIP2-001 certification can help you demonstrate your expertise in NACE solutions and advance your career in related industry. Using NACE-CIP2-001 dumps as part of your study plan can help you identify knowledge gaps, improve your exam-taking skills, provide immediate feedback, and increase your chances of passing the NACE-CIP2-001 exam. NACE NACE-CIP2-001 exam free dumps questions are available below.

Page 1 of 3

1. You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.

Your FIRST preferred course of action is to:

Challenge the supervisor’s authority

Defend the previous inspector

Express a willingness to work with the site team and follow the specification

Suggest to the Owner that the supervisor should be removed from site

 Loading...

2. Non-Conformance Reports are designed to:

Punish the Contractor for substandard work

Elevate the status of the Inspector

Assist the Owner in negotiating credits from the Contractor

To identify items that do not meet the specification requirements

 Loading...

3. Individuals conducting Coating Surveys should:

Always be NACE Level 3 Certified Inspectors

Always be NACE or SSPC Protective coating Specialists

Always be experienced Specification Writers

Always be trained and experienced Coating Industry

 Loading...

4. As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.

True

False

 Loading...

5. The standards defining surface cleanliness achieved by centrifugal blast cleaning are:

Different than air blast cleaning

The same as air blast cleaning

Slightly different to air blast cleaning

Comparable to air blast cleaning

 Loading...

6. Centrifugal blast cleaning requires:

A large volume of air to propel the abrasive

Very large nozzles

Well maintained blast wheels

The use of single use abrasives

 Loading...

7. A failure caused by applying a coating too thinly is known as

failure to cure.

chalking.

cracking.

pinholes.

 Loading...

8. When conducting inspections the Inspector should follow which standards:

NACE and SSPC standards in North America

ISO standards in Europe and Asia

Australian standards in Australia

The specified standards

 Loading...

9. Inspection and Test plans are developed by referencing:

The Specification, TDS, relevant Standards and Codes

The Specification, SDS, relevant Standards and Codes

The Specification, Application Guidelines, 'Relevant Standards and Codes

The Specification, Safety Manual, Relevant Standards and Codes

 Loading...

10. Which product, when closely inspected has a green or red layer of fusion bonded epoxy (FBE) that is visible directly on the steel?

2-Layer Polyethylene (PE)

3-Layer Polyethylene (PE)

Fusion Bonded Epoxy

Coal Tar Enamel

 Loading...

Page 2 of 3

11. WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)

True

False

 Loading...

12. When working with someone who is very concerned about Stability and maintaining adherence to the status-quo, the Inspector should try to:

Implement immediate to get them motivated

Give them as much advance notice as possible about upcoming changes

Challenge their value to the team and try to get them out of their comfort zone

Make sure they are the center of attention in all site meetings

 Loading...

13. The best choice of instrument for holiday testing of thick film concrete coatings is:

Low Voltage Sponge Type

High Voltage DC Pulse Type

High Voltage DC Constant Current

High Voltage AC

 Loading...

14. A reinforced coating is

equally resistant to movement and impact as a non-reinforced coating.

equally resistant to abrasion and impact as a non-reinforced coating.

less resistant to movement, abrasion, and impact than a non-reinforced coating.

more resistant to movement, abrasion, and impact than a non-reinforced coating.

 Loading...

15. When observing fabrication defects the NACE Inspector should:

Require they be corrected prior to coating

Consult the specification to determine how they should be treated

Stop the job immediately

Write an NCR and call the fabricator

 Loading...

16. Linings are used on the interior of pipelines to

provide protection against soil chemicals.

afford limited temperature insulation.

protect the transported product.

reduce magnetic polarity.

 Loading...

17. The Inspectors' goal at the Pre-Job Conference is to:

Obtain a clear understanding of the Specification

Discuss contractual requirements

Manage the meeting so it doesn't go off topic

Take accurate meeting minutes for distribution

 Loading...

18. An Inspection and Test Plan is required when:

It is always required

When the Coating Applicator requests one

When the Owner specifies one

When the Inspector requests one

 Loading...

19. Generally for safety considerations, waterjetting hose connections use

an oil/water separator.

a long wand.

a whip-lock device.

filters.

 Loading...

20. Examples of non-ferrous metals include

Select All that Apply:

mild steel.

aluminum

iron

copper

 Loading...

Page 3 of 3

21. Coating Surveys are legally required:

On commercial marine vessels and offshore platforms

On high pressure gas lines and fireproofed structures

On water tanks and potable water pipelines

On food and beverage vessels and can linings

 Loading...

22. Corrosion is the reverse process of

hot dipping.

steel manufacturing.

flaking.

galvanic deterioration.

 Loading...

23. When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:

Organic coatings

Polyurea

Inorganic Coatings

Latex

 Loading...

24. You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.

Of the options shown below, what would be the preferred option in this situation?

SP 1 followed by acid etching

SP 1 followed by caustic etching

SP 1 followed by SP 2

SP 1 followed by SP 3

 Loading...

25. In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?

Flow stage

Wetting stage

Cure stage

Gel stage

 Loading...

26. Thermal Spray coatings provide:

Barrier protection

Inhibitive protection

Sacrificial protection

Thermal protection

 Loading...

27. Galvanizing performs best in which of the following exposures:

pH below 4

pH above 12

pH between 5-10

pH of 13

 Loading...

28. You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.

Your FIRST preferred course of action is to:

Verbally challenge the NCR

Request a re-blast of the item in question

Consult your supervisor

Review the NCR with the other Inspector

 Loading...

29. Coating application to concrete substrates is:

More challenging than coating steel

Less challenging, than coating steel

The same as coating steel

Not required as Concrete is inorganic

 Loading...

30. When performing a hardness test on a coating which has elastic properties the inspector is likely to likely to observe:

A very high reading

A very low reading

Cold flow or creep

No difference from any other coating

 Loading...

 Loading...