Get Certified Easily with Online D-PE-FN-01 Dumps

Category:

Comments:

0 Comments

Post Date:

March 24, 2025

Using Dell PowerEdge Foundations v2 Exam D-PE-FN-01 questions can help you build confidence as you prepare for the exam. By practicing with these D-PE-FN-01 dumps questions, you will be better prepared and more confident when you take the actual exam. Besides, D-PE-FN-01 exam dumps questions cover a wide range of topics that are relevant to the certification exam. By using D-PE-FN-01 dumps questions, you will be able to ensure that you have a comprehensive understanding of the material covered on the exam. Practice free DELL EMC D-PE-FN-01 exam dumps below.

Page 1 of 8

1. What is maximum number of iDRAC Virtual Console sessions that can be run simultaneously?

2. Where in the iDRAC UI can the iDRAC be reset to its default settings?

Maintenance > Diagnostics

Maintenance > Troubleshooting

Troubleshooting > Diagnostics

Troubleshooting > SupportAssist

3. An administrator receives a report that a system crashed. However, users were unable to capture the error message before the system rebooted.

How can the administrator see what the message was?

Check timestamps and look for clues in UPS logs

Review BIOS settings to check WatchDog

Read backup logs from the last backup that was performed

Using the iDRAC, navigate to the “Last Crash” screen

4. What types of data transfer are used by Dell EMC servers to connect mass storage devices?

USB, Ethernet, SSD, and CSI

SAS, USB, Ethernet, and SSID

SSID, CSI, USB, and SAS

Ethernet, SSID, CSI, and SAS

5. A server administrator needs to monitor a Dell EMC PowerEdge server without installing any additional software.

Which management tool is the most appropriate to use?

OME

SAE

iDRAC

OMSA

6. Refer to the exhibit.

Which description matches the system displayed?

Four HDD midplane in a Dell EMC PowerEdge server

Four-GPGPU configured Dell EMC PowerEdge server

Four-socket motherboard in a Dell EMC PowerEdge server

Four BOSS cards configured Dell EMC PowerEdge server

7. Where is a tower server commonly deployed, and why?

Branch or remote location, because a rack is not needed

Datacenter, because tower servers tend to be more powerful so more work can be done in the same physical space

Branch or remote location, because of security concerns

Datacenter, due to more PCI support allowing for more external storage

8. Which type of cables are shown in the graphic?

Coaxial

Copper

Fibre

UTP

9. Based on the exhibit, which type of virtual switch is vSwitch1?

External

Public

Open

Private

10. A system administrator needs to set up a server and assign an IP address on a Class C network. All addresses are available on the network.

Which IP address should the system administrator use for the server?

210.100.155.12

195.0.0.0

192.168.12.0

200.200.200.255

Page 2 of 8

11. Which type of hypervisor is shown in the graphic?

Type 1 - bare metal

Type 1 - nested

Type 2 - converged

Type 2 - hosted

12. Which LTO Ultrium generation introduced hardware encryption?

LTO-3

LTO-4

LTO-5

LTO-6

13. A server is experiencing issues with completing POST. The environment does not have a KVM or "Crash cart" available to view where the system is halting.

Which method can an administrator use to determine the first place to start troubleshooting?

Run OpenManage Essentials

Check rear lights on the server chassis

Run Repository manager

Check iDRAC Post Code

14. What is a consideration for a hardware administrator who is physically installing multiple servers into a rack?

Observe load requirements specified in documentation for the switch.

Avoid unevenly loading the rack and creating a hazard.

Ensure that the server can connect to Windows updates

Ensure that the associated UPS can also power the top-of-rack switch.

15. Which RAID configuration provides the lowest redundancy level?

RAID 5

RAID 6

RAID 50

RAID 60

16. What is the objective of the Patch Management process?

Confirm that industry cable management techniques are followed

Ensure that all software within a company is up-to-date

Correctly install and configure Dell EMC Open Manage Essentials

Upgrade server hardware to the latest PCB revisions

17. Based on the exhibit, which device is a Boot Optimized Storage Solution (BOSS) Controller?

18. A system administrator needs to configure an offsite shared mailbox across multiple users.

Which protocol should be used to avoid email loss and keep the mailbox synchronized on all clients simultaneously?

SMTP

IMAP

POP

19. A customer looks for a storage solution to boot the hypervisor, where one is active and the other standby.

Which solution will allow the requirement?

BIOS

IDSDM

BOSS

UEFI

20. A company is planning a storage capacity for their new solution and have an archiving system that requires long retention periods for the data.

What is the storage tier that best suits the new solution?

Lower storage tier

Extreme performance storage tier

Flash storage tier

Performance storage tier

Page 3 of 8

21. Based on the graphic, which data center mechanism is converting warm air (red arrows) to cold air (blue arrows)?

Hot Aisle Containment

Computer Room Air Handlers

Power Usage Effectiveness

Evaporative Cooling Tubs

22. A network administrator needs to size an IP subnet to address his 60,000 clients.

Which subnet will fulfill the requirement without using unnecessary IP addresses?

/24

/32

/16

23. An administrator needs to set up a RAID of at least 4 disks that can sustain the failure of only one disk and is cost effective.

Which RAID level fulfills these requirements?

RAID 0

RAID 5

RAID 6

RAID 10

24. Which log can be viewed in the iDRAC?

Security Log

Error Log

Lifecycle Log

Application Log

25. A system administrator wants to remove and replace their operating system installation with a newer version. The administrator is using a Dell EMC Rack server with an iDRAC set up correctly.

Which tools are required to perform this operation?

iDRAC, SupportAssist, and Virtual Console

iDRAC, Virtual Console, and Virtual Media

iSM, Repository Manager, and Virtual Console

iDRAC, OMSA, and iSM

26. A user is reporting problems with a service on a Windows server. Where can the information about the service be found in the Event Viewer?

Windows Log > Application

Application and Services Logs

Service Log > Events

Windows Log > System

27. What is a backup process?

Copying files to a secondary site for preservation in case of equipment failure or other catastrophe.

Capturing historical records used for future reference and is not actively used by the server.

Moving data that is no longer actively used to a separate storage device, for long-term retention.

Using server technologies data from one computer node to another.

28. A system administrator recently hired by a company notices that the client systems are set with static IP addresses. The administrator wants the IP addresses automatically distributed to each computer.

Which server role is required to perform this task?

Web Server

DHCP

DNS

Active Directory

29. Which key is used to access the one-time boot menu when preparing a Dell EMC PowerEdge server?

F10

F11

F12

30. What is the IP address "xxx.xxx.xxx.0" reserved for?

Unicast address

Network ID

Broadcast address

Network gateway

Page 4 of 8

31. A company is planning a physical security solution for its branches worldwide.

Which danger are they trying to avoid?

Ransomware

Buffer Overflow

Phishing

Asset vandalism

32. A General Purpose GPU (GPGPU) is commonly installed in Dell EMC PowerEdge servers.

Which component does GPGPU complement when processing tasks?

iDRAC modules

Memory

Network Interface Cards

CPU

33. Which advance feature does a Dell EMC energy-smart power supply offer?

Ability to update firmware without the downtime

Provides thermal management of the supply

Reverse airflow to meet data center requirement

Throttles output to power-heavy components

34. Which network speed is known as Fast Ethernet?

10 Mbps

100 Mbps

1 Gbps

10 Gbps

35. What is a benefit of NVDIMM?

Accelerates workloads into the next generation server

Operates at higher voltages

Provides Auto-Rebuild

Provides data redundancy

36. A system administrator is configuring the file transfer role of a server. Important data needs to be accessed by end users.

Which file transfer service provides secure transfer of the data?

SNMP

FTP

SFTP

TFTP

37. A system administrator is installing Hyper-V on a Windows Server 2016. They receive an error message.

How can they solve the problem?

Verify that the virtualization feature is enabled

Check the installed processor is x86

Confirm essentials license is installed

Ensure minimum memory of 2 GB

38. An administrator received CPU thermal warning alerts from a Dell EMC PowerEdge server. The inlet temperature is normal.

What should they do?

Verify that memory shrouds are installed in the server

Lower the room air conditioning temperature

Increase the voltage of the fans via the iDRAC GUI

Check the Hot Aisle Containment

39. What should an administrator review, prior to deploying an operating system (OS), to confirm there are no hardware incompatibilities with the desired OS?

iDRAC SEL

HCL

BPA

LCC Log

40. Which solution is recommended for installing a hypervisor in a Dell EMC PowerEdge rack server or in a hyper-converged infrastructure (HCI) host?

FC HBA

BOSS

CPU

NVDIMM

Page 5 of 8

41. What is the main purpose of Virtual Memory?

Increase physical memory.

Increase system performance.

Add a layer of redundancy.

Add a copy of files.

42. A system administrator has deployed Windows Server 2016. They want to run the Best Practices Analyzer to check for any issues.

How would they access this tool?

Server Manager

SupportAssist Enterprise

Resource Monitor

OpenManage Server Administrator

43. Which association does the ARP service provide the operating system?

MAC and IP address

Subnet mask and VLAN ID

VLAN ID and MAC address

IP address and subnet mask

44. What is an example of a dedicated server?

Virtual Switch server

Clustered server

Database server

Secure Shell server

45. What is the correct sequence of message exchanges between a DHCP server and Client for a connection request?

46. Which types of data transfer interface are used by Dell EMC servers to connect mass storage devices?

USB, Ethernet, SSD, and CSI

SAS USB, Ether, and SSD

SSD, CSI, USB, and SAS

Ethernet, SSD, CSI, CSI, and SAS

47. An administrator is trying to install iSM on an operating system.

Why would the iSM blue installer box be grayed out in the iDRAC GUI?

iSM installation is in progress

iSM is not installed on the operating system

iSM is already installed

iSM is not supported on the operating system

48. A customer is doing the following types of compute.

- Compute-intensive applications

- Machine learning and Artificial Intelligence

- Data Analytics

Which type of server can fulfill these requirements in a reasonable time frame?

Tower Servers

Nano Servers

Accelerated Servers

Data Center Scalable Servers

49. What is a benefit of having an Uninterruptible Power Supply (UPS) attached to a server?

Provides permanent power to a server, eliminating the need for a wall outlet.

Replaces the need for power supplies in a server.

Keeps a server running during a long power outage

Provides short-term protection to allow a server to be shut down gracefully.

50. A system administrator encountered an issue with the DHCP service. It stopped without any user action. Where is it possible to gather information about the problem?

Windows Event Log > System

Windows Event Log > Application

Task Manager

Performance Monitor

Page 6 of 8

51. An administrator needs to directly enter the System Setup on their Dell EMC PowerEdge server while working onsite.

What key should be used during POST?

F10

F11

F12

52. Which document provides the computer hardware that has been tested to pass Microsoft standards of compatibility, reliability, security, and applications for all Dell EMC PowerEdge Servers?

HML

BCL

Quickspecs

HCL

53. An administrator needs to set up a RAID which requires high performance but no data protection.

Which RAID level fulfills these requirements?

RAID 0

RAID 1

RAID 5

RAID 6

54. A customer requires an external storage for their Dell EMC PowerEdge Server.

What type of storage will be the most cost-effective solution for the requirement?

DAS

NAS

CAS

SAN

55. Refer to the exhibit.

What is this system referred to?

HAC

FANS

CRAH

HVAC

56. What items must be included when compiling server documentation?

Inventory, network map, and firmware list

Firmware list, driver list, and service tags

Vendor list, network map, and action log

Network map, inventory, and action log

57. Which Ethernet cable type should be installed if high interference is a concern?

RJ45

802.11n

STP

UTP

58. What is the minimum number of hard disks required in a RAID 10 configuration?

59. A server administrator needs to change the settings of their iDRAC utilizing just the front panel.

Which configuration would allow this?

LED Only

LCD Only

Both LCD and LED

LED with Quick Sync 2

60. What is RAM used for in a Dell PowerEdge server?

Archive storage

RAID storage

NVMe cache

Volatile memory

Page 7 of 8

61. An administrator is scheduling a software patch in an enterprise environment.

What is a consideration for the administrator regarding potential impact to users?

Server Redundancy

Update file size

Disruption of workflow

Network Bandwidth

62. For which use case is Dell EMC OpenManage Essentials recommended for installation?

Comprehensive, one-to-one systems management solution for remote or local servers

Management console for one-to-many monitoring of Dell EMC infrastructure

Operation of hardware while iDRAC is non-functional

Management and integration of operating system updates across an entire environment

63. Which initial menu option should be chosen from the iDRAC Virtual Console to access System Setup?

Lifecycle Controller

Next Boot

Normal Boot

Virtual CD/DVD

64. A PowerEdge 14G server administrator has to shut down a server for urgent intervention.They don't want to risk any data loss but don't know the OS password.

What steps should be taken?

Connect to iDRAC > Dashboard tab > click Power Off System in the dropdown menu

Connect to iDRAC > Dashboard tab > click Graceful Shutdown

Connect to Lifecycle Controller > Server management > Power Off System

Connect to Lifecycle Controller > Server management > Send OS shutdown command

65. Which storage device was added as of 14G to Dell EMC PowerEdge servers and can be dedicated for hypervisor installation?

BOSS

vFlash

NVDIMM

DVD

66. What is an statement in reference to software RAID?

Software RAID does not have any data integrity issues

Software RAID requires a hardware license

Software RAID is an additional cost

Software RAID uses CPU resources

67. What is a role and responsibility of virtual memory?

Mapping process address space to disks

Enables unified PCI operations

Executes a sequence of stored instructions

Enables zero copy operating system operations

68. How much raw capacity will be available when deploying a new server that contains six, 3 TB hard drives in a RAID 10 configuration?

9 TB

12TB

15 TB

18 TB

69. Where in the iDRAC GUI can the iDRAC be reset to its default settings?

Maintenance > Troubleshooting

Troubleshooting > SupportAssist

Troubleshooting > Diagnostics

Maintenance > Diagnostics

70. What is the primary reason for a server emitting a greater heat load than a client system?

Smaller system fans in the server

Less space for air to circulate inside the server chassis

Higher ambient temperature in the data center

Increased power usage of the server components

Page 8 of 8

71. An MX7000 was purchased with minimal configuration.

What can an administrator add to make the MX7000 management interface fully redundant?

CMC module

MX9116n module

MX9002m module

Enterprise license

72. Where are the system settings of a Dell EMC PowerEdge server stored?

CMOS

vFlash

BIOS

UEFI

TAGS:

D-PE-FN-01, D-PE-FN-01 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-PE-FN-01 Dumps Full Version

Q&As: 238
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Get Certified Easily with Online D-PE-FN-01 Dumps

Related

Posts

Improve Your Knowledge with D-CIS-FN-01 Exam Dumps

D-VXR-DY-01 Dumps Questions – Effective Way to Get Certified

Study Online D-CIS-FN-01 Exam Dumps to Pass

Study Online D-NWG-DS-00 Exam Dumps to Pass

About Us

EMAIL

Services

Opening Hours