HPE0-S59 Online Dumps Boost Your Career

Category:

HP Free Dumps

Comments:

0 Comments

Post Date:

October 22, 2024

The HPE0-S59 HPE Compute Solutions certification exam is challenging, and it's natural to feel anxious and nervous before taking the exam. Practicing with HPE0-S59 dumps questions can help alleviate this anxiety by boosting your confidence. As you practice and become more familiar with the exam format and content, you'll feel more confident in your abilities, which can help you perform better on the actual HPE0-S59 exam. Practicing with HPE0-S59 questions can increase your chances of success in the certification exam. Practice free HP HPE0-S59 exam dumps below.

Page 1 of 4

1. Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.

What must the customer do before migrating the application?

Migrate the application to a Logical JBOD and connect it to the new server

Copy the server profile and assign the clone to the new hardware

Edit the server profile and change server hardware type

Create a new server profile template and apply to the new hardware

2. What is one of me benefits of using HPE Composer 2?

HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system

HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy

The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup

A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer

3. Refer to the exhibit.

Which statement about this logical JBOD is true?

This logical JBOD can be connected to multiple systems to formulate a snared datastore.

After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created

After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done

This logical JBOD can be presented to the compute nodes in a different frame.

4. What is a restriction of using a RoCE network?

This network type does not support sFlow and remote port monitoring.

This network type does not support the smart link and private network features.

This network type is not supported with HPE Virtual Connect SE 100Gb F8 Module for HPE Synergy.

This network type by default is configured as untagged network and cannot be a part of a network set.

5. HOTSPOT

An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.

Click the parameter that the customer should configure within an uplink set to meet this requirement

6. Which statement about a new HPE SimpliVity deployment is true?

New HPE SimpliVity deployments give customer flexible choice of hypervisor

All new HPE SimpliVity models are based on AMD CPUs

All new HPE SimpliVity models support deduplication and compression

New HPE SimpliVity deployments are licensed per node not per physical socket

7. Which compute node parameters are captured within server hardware type?

Number of the CPUs

installed operating system

Mezzanine card configuration

Size of the memory Installed

8. Your customer plans to manage HPE Primera using HPE Oneview

Which storage management tasks can be completed using HPE OneView for this environment?

CPG management

Volume provisioning

Cache management

Replication setup

9. HOTSPOT

Click the area within the iLO management interface that will allow you to access workload Advisor.

10. DRAG DROP

Put the steps of the HPE infosight flow in the correct order.

Page 2 of 4

11. Which statement about login redistribution is true?

12. Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter.

The customer wants to use them to manage HPE Synergy Gen10 compute modules, HPE ProLiant Gen10 servers, and an MSA array.

Which statement about compatibility of the existing environment with the planned software components is true?

Both HPE Synergy Gen10 full-height compute modules plugins will require a license.

HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers.

Not all of HPE Storage Integration Pack for VMware vCenter features are supported with MSA arrays.

HPE ProLiant Gen10 systems require HPE OneView for VMware vCenter server licenses for each node.

13. Your customer plans to deploy VMware ESXi 7.0 U2, and they are looking for a hardware platform that will allow them to use up to 24 TB of physical memory.

Which HPE compute system meets the customer's requirements?

HPE Superdome Flex

HPE ProLiant DL380 Gen 10 Plus

HPE ProLiant DL580 Gen 10

HPE Synergy 480 Gen10 Plus

14. Your customer has the following HPE Synergy setup

- 3 HPE Synergy 12000 Frames

- 4 HPE Virtual Connect SE 100 Gb F32 Modules

- 2 HPE Synergy 50 GO Interconnect Link Modules

- 36 HPE Synergy 480 Gen10 Plus compute modules

- 2 HPE Composer 2 modules

Which statement about this setup is true?

To use all compute nodes, the customer must create at least two logical enclosures

To manage all frames, the customer must buy two additional HPE Composer 2 modules

The customer must buy 36 HPE OneView Advanced licenses to manage compute modules

The customer can add one D3940 storage Module to each of the frames

15. 1.A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?

Brocade 32GB Fibre Channel Switch Module for HPE Synergy

HPE virtual Connect SE 32 Gb FC Module for Synergy

HPE Virtual Connect SE 100 Gb F32 Module tor Synergy

HPE Synergy 12 Gb SAS Connection Module

16. Which statement about an HPE Oneview support dump is true?

Appliance support dump by default contains a logical enclosure support dump

Support dump is a binary file that can be opened only in a dedicated application

Support dump can be created if HPE Virtual Connect modules are installed in the frame

Preview support dump is available only when creating an appliance support dump

17. A junior architect designed a solution based on HPE Synergy that must meet the following requirements:

Support at least 30 HPE Synergy 480 Gen10 Plus compute modules

Interconnect modules must provide MAC and WWN virtualization

All HPE Synergy frames must formulate a single management entity

The management appliance should not be a single point of failure

Connectivity to FC array should be available to all compute nodes

The proposal consists of:

3 HPE Synergy 12000 frames

6 HPE Composer 2 modules

2 HPE Virtual Connect SE 100Gb F32 Module

4 HPE Synergy 50Gb Interconnect Link Module

Which statements about this proposed design are true? (Select two)

FC upgrade licenses for HPE Virtual Connect SE 100Gb F32 Module must be added.

HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100Gb F32 modules.

Remove 4 HPE Composer 2 modules from the design, as they are not required.

The selected interconnect modules do not provide the requested WWN virtualization.

The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules.

18. Refer to the exhibit.

Which statement about this logical interconnect group is true?

Both modules are located in different frames for redundancy

For an uplink set, ports from different modules can be selected

interconnect modules are installed in interconnect bays 1 and 4

An additional license is required to change the enclosure count 18/84

19. Your customer is trying to grow a VMware cluster using HPE OneView for VMware vCenter Server.

They get an error and cannot proceed.

Which tool should you use to troubleshoot the problem?

HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.

HPE OneView for VMware vCenter Server to verify if the server profile template is properly imported and registered.

vCenter Server to use the HPE OneView for VMware vCenter plugin to import the cluster for HPE OneView management.

iLO interface of a given HPE Synergy compute node to verify whether this node is registered within HPE OneView.

20. Which statement about HPE OneView milestone releases is true?

A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy

A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems

A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.

A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.

Page 3 of 4

21. Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer’s needs?

Rack Management Controller for nPar management

HPE Superdome Flex Grid licenses enabling connectivity between chassis

At least Tour HPE Persistent Memory DIMMs per nPar

One base chassis and three expansion chassis with licenses

22. What is a limitation when creating a server profile?

BIOS settings can be changed only when UEFI optimized is selected as boot mode

ILO management is limited to the integration with Active Directory or LDAP

Administrator cannot define more than 8 connections within a server profile

It is not possible to create shared volumes on demand through a server profile

23. You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures.

What will be the impact of that change?

All physical interconnects from affected logical interconnects will be placed in a maintenance mode

All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration

All logical interconnects configured using this logical Interconnect group will report inconsistency

All logical interconnects configured using this logical interconnect group will be automatically updated

24. Your customer plans to deploy VMware vSAN using D3940 Storage Modules.

Which statement about this solution is true?

The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.

To use the storage controller that will access D3940 storage modules, a second CPU must be installed.

For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.

All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured

25. Which statement about the HPE D3940 storage module is true?

Only one type of drives (SATA, SAS, SSD) can be installed in each module.

It is configured through CLI available from HPE Synergy console.

SATA drives require redundant IO adapters to be installed in this module.

Up to five modules can be installed in a single frame with Gen10 servers.

26. One of the administrators added some connections within a server profile that was created using a template. This server profile did not report inconsistency.

What is the most likely reason for this behavior?

The administrator removed FC connections that are not monitored by default.

Connections defined in the server profile are not monitored for compliance.

Consistency check for connections is set to Minimum or Not checked.

The server is in maintenance mode and does not report any issues.

27. Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).

What should you check during troubleshooting process?

If HPE OneView credentials are added in vCenter Server

If an compute nodes are added to the vCenter Server

If the HPE Oneview instance Is integrated with HPE OV4V

If vCenter Server is licensed in the HPE Oneview interface

28. Which statement about HPE Superdome Flex firmware updates is true?

RMC CLI can simultaneously update complex firmware for multiple HPE Superdome systems.

RMC CLI is the only tool that can be used to update HPE Persistent Memory firmware.

HPE OneView is the only tool that can be used to perform I/O updates.

HPE SUM is the only tool that can be used to update HPE Persistent Memory firmware.

29. Refer to the exhibit.

How will traffic for a given network be affected if the purpose is changed from General to VM Migration?

Changing this parameter to VM Migration will give higher priority for vMotion traffic.

Changing this parameter does not affect the behavior of the network or traffic.

If VM Migration is selected, all types of traffic other than vMotion will be blocked.

This parameter will allow an administrator to define a VMkernel port.

30. Which statement about the HPE OneView Update Readiness Checker is true?

It can be used to verify compatibility of a given Synergy Service Pack with a specific version of HPE OneView.

It can be used to evaluate the health of an HPE OneView appliance before proceeding with an appliance update.

It can be used to examine the firmware version installed on compute nodes and compliance with HPE OneView version.

It can be used to determine whether the latest milestone HPE OneView edition is currently installed.

Page 4 of 4

31. Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.

Which HPE compute system meets this customer's requirements?

HPE ProLiant DL380 Gen 10 Plus

HPE Synergy 480 Gen10 Plus

HPE ProLiant DL560 Gen10

HPE Superdome Flex 280

32. You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group

What should you check to fix the issue?

if both FiexNICs are configured with the same speed

If the logical enclosure is built on at least three HPE Synergy frames

if both FiexNICs are connected to different networks

if the logical enclosure is configured with redundant master modules

TAGS:

HPE0-S59, HPE0-S59 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get HPE0-S59 Dumps Full Version

Q&As: 104
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

HPE0-S59 Online Dumps Boost Your Career

Related

Posts

Valid HPE7-A06 Exam Dumps are Your best Choice to Pass

Valid HPE0-G03 Exam Dumps are Your best Choice to Pass

Study Online HPE0-J68 Exam Dumps to Pass

Improve Your Knowledge with HPE2-B01 Exam Dumps

About Us

EMAIL

Services

Opening Hours