HPE6-A85 Online Dumps Boost Your Career

The HPE6-A85 Aruba Certified Campus Access Associate Exam certification exam is challenging, and it's natural to feel anxious and nervous before taking the exam. Practicing with HPE6-A85 dumps questions can help alleviate this anxiety by boosting your confidence. As you practice and become more familiar with the exam format and content, you'll feel more confident in your abilities, which can help you perform better on the actual HPE6-A85 exam. Practicing with HPE6-A85 questions can increase your chances of success in the certification exam. Practice free HP HPE6-A85 exam dumps below.

Page 1 of 4

1. You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch.

What is the best technology to use for this task?

Rate limiting

DWRR queuing

QoS shaping

Strict queuing

 Loading...

2. What is the ideal mounting position for a typical Aruba indoor AP?

Horizontal, below a suspended ceiling

Under a office desk

Horizontal, above a suspended ceiling

Vertical, at a wall

 Loading...

3. Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnected with two cables between ports 1/1/1 and 1/1/2 All four ports have "no shutdown" and "no routing" commands.

How will STP forward or discard traffic on these ports?

The switch with the lower MAC address will forward on both ports, while the switch with the higher MAC address will forward on both ports

The switch with the lower MAC address will forward on both ports, while the switch with the higher MAC address will discard on one port

The switch with the lower MAC address will discard on one port, while the switch with the higher MAC address will forward on both ports

The switch with the lower MAC address will discard on one port, while the switch with the higher MAC address will discard on one port

 Loading...

4. What is indicated by a flashing amber global status indicator LED on an Aruba CX6200M?

The switch has a recoverable fault.

Self-test is in progress.

The firmware image is corrupt.

The switch is booting the firmware image.

 Loading...

5. Which of the following is a primary security feature supported by Aruba switches?

Built-in intrusion prevention system.

Web content filtering.

Role-based access control.

All are correct.

 Loading...

6. What are two advantages of a UXl? (Select two.)

A UXl can be used without any internet connection

A UXl helps to calculate the best WiFi channels in a remote location

A UXl behaves like a client/user

A UXl measures the Wi-Fi coverage of all APs in the given location.

A UXl can check different applications, such as HTTP VOIP or Office 365.

 Loading...

7. Describe the purpose of the administrative distance

Routes teamed via external BGP have a higher administrative distance than routes learned via OSPF

The administrative distance is used as a trust rating tor route entries

The administrative distance for a static route is 10

The higher administrative distance is preferred

 Loading...

8. What information is required when using the ClearPass self-service registration page to generate a Multiple Pre-Shared Key (MPSK) for headless devices?

The device's model number

The device's MAC address

The device's IP address

The device's OS type

 Loading...

9. You need to troubleshoot an Aruba CX 6300F switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

USB-C console port

RJ-45 console port

USB-A console port

Omgmt port using SSH

 Loading...

10. What does a slow amber-flashing Stack-LED indicate?

One switch has a stacking failure.

A port has a stacking failure Stacking mode Is not selected

Stacking mode selected

Stacking is synchronizing Please wait

 Loading...

Page 2 of 4

11. Based on the "show ip route" output on an Aruba CX 8325, what type of route is "10.20.0.0/22, vrf default via 10.1.1.1, [110/200]"?

connected

local

OSPF

static

 Loading...

12. When measuring signal strength, dBm is commonly used and 0 dBm corresponds to 1 mW power.

What does -20 dBm correspond to?

.-1 mW

.01 mw

10 mW

1mW

 Loading...

13. Which feature can network administrators use to centralized RF planning and optimization service when using an Aruba mobility master architecture?

Airwave

Client Match

AirMatch

Client Wave

 Loading...

14. What is an advantage of using Layer 2 MAC authentication?

MAC allow lists are easily maintained over time.

No setup is required on the client.

It matches user names to MAC address.

MAC identifiers are hard to spoof.

 Loading...

15. What are two characteristics of ClientMatch? (Select two.)

It optimizes channels of an A

An algorithm to adjust RF patterns.

It is used to locate a client.

It is an Aruba patented technology.

It helps to move sticky clients to another A

 Loading...

16. 1.What is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

ip-route 10.2.10.0/24 172.16.1.1

ip route 10.2.10.0.255.255.255.0 172.16.1.1 description aruba

ip route 10.2.10.0/24.172.16.11

ip route-static 10.2 10.0.255.255.255.0 172.16.1.1

 Loading...

17. A network administrator with existing IAP-315 access points is interested in Aruba Central and needs to know which license is required for specific features Please match the required license per feature (Matches may be used more than once.)

 Loading...

18. Which statement is correct when comparing 5 GHz and 6 GHz channels with identical channel widths?

5 GHz channels travel the same distances and provide different throughputs to clients compared to 6 GHz channels

5 GHz channels travel different distances and provide different throughputs to clients compared to 6 GHz channels

5 GHz channels travel the same distances and provide the same throughputs to clients compared to 6 GHz channels

5 GHz channels travel different distances and provide the same throughputs to clients compared to 6 GHz channels

 Loading...

19. Which type of device type and group persona is required to manage a Microbranch environment?

ArubaOS 10 AP Group Persona

ArubaOS 10 Branch Gateway Group Persona

ArubaOS 8 AP Group Persona

ArubaOS 8 Branch Gateway Group Persona

 Loading...

20. What is the recommended VSF topology? (Select two.)

Star

Daisy chain plus MAD

Full mesh

Full mesh plus MAD

Ring

 Loading...

Page 3 of 4

21. A network technician has successfully connected to the employee SSID via 802 1X.

Which RADIUS message should you look for to ensure a successful connection?

Authorized

Access-Accept

Success

Authenticated

 Loading...

22. Match the feature to the Aruba OS version (Matches may be used more than once.)

 Loading...

23. In which scenarios is Zero Touch Provisioning (ZTP) most beneficial? (Select two)

When deploying large scale networks rapidly.

In networks where configurations change frequently.

For small networks that do not have IT staff.

When high security is a concern and manual setup is required.

 Loading...

24. What does a wireless client do first when its countdown timer reaches zero and it receives a Transmit Opportunity (TXOP)?

It immediately sends its Data Frames and receives an ACK from the A

It sends a CTS-to-self announcement to the ESP gateway.

It sends a CTS-to-self announcement to the AP and all other clients.

It sends a reassociation request frame to the AP and sends its Data Frames.

 Loading...

25. Review the configuration below.





Why would you configure OSPF to use the IP address 10.1.200.1 as the router ID?

The IP address associated with the loopback interface is non-routable and prevents loops

The loopback interface state is dependent on the management interface state and reduces routing updates.

The IP address associated with the loopback interface is routable and prevents loops

The loopback interface state Is independent of any physical interface and reduces routing updates.

 Loading...

26. What is the recommended UXI monitoring solution in large logistic facilities?

Use a special ruggedized UXI sensor.

Use the UXI App on all handheld devices running on Windows C

Add a UXI sensor in every aisle of the logistic space.

Use the UXI App direct on Zebra scanning devices running on Android.

 Loading...

27. Which device configuration group types can a user define in Aruba Central during group creation? (Select two.)

ESP group

Security group

Ul group

Default group

Template group

 Loading...

28. What happens when the signal from an AP weakens by being absorbed as it moves through an object?

APs will use bonded channels to decrease latency to clients

Signal to Noise Ratio (SNR) increases

Signal to Noise Ratio (SNR) decreases

Aruba Central dynamically moves clients to neighboring APs

 Loading...

29. Refer to Exhibit.





Which server will receive the smallest quantity of data?

172.17.17.43

10.100.100.25

10.99.26.25

192.168.0.56

 Loading...

30. What is the correct order of the TCP 3-Way Handshake sequence?

 Loading...

Page 4 of 4

31. When does the 802.1x authentication process begin when connecting to a secured enterprise mode WLAN?

After the firewall policies are applied to the session

After the client completes 802.11 association

After the captive portal authentication completes

After the WPA 4-Way Handshake is completed

 Loading...

32. The customer requires two Aruba CX 6200F 48G switches to be connected to each other with a distance of 80m/252ft between wiring closets. Switches need to have reservation for VSF expansion with ring topology in each cabinet.

What is a valid configuration for a redundant link-aggregation port configuration?

Ports 1/1/49 and 1/1/50 with SFP28 for LAG

Ports 1/1/47 and 1/1/48 for LAG

Ports 1/1/1 and 1/1/2 for LAG

Ports 1/1/51 and 1/1/52 with SFP+ for LAG

 Loading...

33. You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports, 2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.

You need to provide an LACP connection to another identical stack with the maximum available bandwidth possible.

What should you configure?

a 16-member LAG using 2 SFP28 ports and 6 SR5 ports on each switch

an eight-member LAG using 4 SR5 ports on each switch

an eight-member LAG using 2 SFP28 ports and 2 SR5 ports on each switch

a four-member LAG using 2 SFP28 ports on each switch

 Loading...

34. What is a weakness introduced into the WLAN environment when WPA2-Personal is used for security?

It uses X 509 certificates generated by a Certification Authority

The Pairwise Temporal Key (PTK) is specific to each session

The Pairwise Master Key (PMK) is shared by ail users

It does not use the WPA 4-Way Handshake

 Loading...

 Loading...