Hybrid Cloud Observability Network Monitoring Dumps Questions Increase Your Chance of Success

Category:

Comments:

0 Comments

Post Date:

December 10, 2023

Passing the Hybrid Cloud Observability Network Monitoring certification exam can be challenging, which is why practicing with Hybrid Cloud Observability Network Monitoring questions can greatly increase your chances of success. SolarWinds Hybrid Cloud Observability Network Monitoring dumps questions help you become familiar with the exam format. The Hybrid Cloud Observability Network Monitoring questions are designed to mimic the actual exam, which means that you'll get a feel for the types of questions you'll encounter, the difficulty level, and the time limit. All the Hybrid Cloud Observability Network Monitoring exam dumps questions are the latest version for you to study. Test free Hybrid Cloud Observability Network Monitoring exam questions below.

Page 1 of 5

1. A node has been added to hybrid cloud observability and shows an “unknown” status until the data is polled. The default interval for polling status is two minutes.

If the node stays in the “unknown” status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)

Ping device from assigned polling engine.

Run SNMP walk on the appropriate node.

Verify the appropriate polling method is set for this node.

Verify a ping response for this node is received through the ICM

2. Which two of the following requirements are needed to monitor an application on a server? (Choose two.)

Add application and ports using server as source and destination IP addresses.

Add the IP address of the server into an IP address group.

Click the monitor recommendation applications button.

Find the application to monitor in the list of available applications and enable it.

3. A device studio poller is being built for a router statistic. It is determined that its object ID (OID) does not exist in SolarWinds’ MIB database.

What is the best workaround for this situation?

consult vendor and add OID to the database

download database from customer portal

select manually define object identifier and specify SNMP

select SNMP and ICMP as the router's polling method

4. Which two of the following reasons explain why device MIB files are important for SNMP polling in hybrid cloud observability? (Choose two.)

MIB files contain all metrics available for polling on the device.

MIB files enable automatic discover/ of devices added to hybrid cloud

MIB files enable hybrid cloud observability to display the metric in a user-friendly format.

MIB files enable SolarWinds to create object IDs (OlDs) for customers to monitor.

5. The status of the parent node of several interfaces is showing red. It is determined that several operationally down and administratively shutdown interfaces are included for monitoring of the parent node.

Which menu in the node details summary page of SolarWinds’ platform allows users to remove interfaces that are operationally down and administratively shutdown?

add alert

edit node

List resources

polling settings

6. Which three of the following data points directly affect the precision of capacity forecasting? (Choose

three.)

amount of historical data used

exhaustion calculation method

polling interval

warning thresholds

7. Which statement depicts the relationship between device studio pollers’ supported technologies and universal device pollers’ (UDPs) supported technologies?

device studio pollers can poll for CPU utilization of SNMP enabled devices, UDPs cannot

device studio pollers can poll for node details of SNMP enabled devices, UDPs cannot

UDPs can poll for hardware status of SNMP enabled devices, device studio pollers cannot

UDPs can poll for memory utilization of SNMP enabled devices, device studio pollers cannot

8. What is a possible result of decreasing the top talking optimization value?

increased storage requirement

reduced database performance

reduced page load times

slower reporting speed

9. Some of the flows received are mapping to an IP address that does not match any of the nodes being monitored. It has been verified that all flow sources are also being monitored by NPM and SNMP polling. The known source nodes for these flows have the correct IP address.

What could be causing this issue?

flows are coming from a non-primary address and the setting to match the node by another IP is turned off

flows are IPv6 and the network monitoring does not recognize that version

IP address for the node is incorrect in SNMP polling but correct in the flows

source machine field in the flows is not configured and the setting to match the node by another IP is turned off

10. On which two of the following occasions do custom pollers need to be created? (Choose two.)

monitor equipment that does not support WMI

monitor special equipment

monitor specific metric that is not out-of-the-box

monitor unsupported object ID

Page 2 of 5

11. The status of the interfaces for a network switch shows as “unknown” in SolarWinds’ platform web console, although the node status is “up”.

What could be the reason?

hardware sensors are disabled on the node

ICMP is blocked between the node and the polling engine

interface details have changed on the device

interfaces are not managed in hybrid cloud observability (HCO)

12. Which two of the following statistics are available for network capacity planning? (Choose two.)

disk space forecast

memory usage data on nodes

node temperature

receive utilization on interfaces

13. If an IP address group is hidden in IP address groups management, what impact will it have on the data?

group historical data will be deleted

group will be shown in compliance reports

group will not be shown in charts or reports

group will not be shown in IPAM

14. Which two of the following flow sources are supported by hybrid cloud observability? (Choose two.)

Cisco

cFlow

J-Flow

NetStream

15. It is noted that the hardware health monitoring for a Cisco switch is generating false positives. It is verified that the alerted hardware issues are not occurring.

What is causing the issue?

Hardware sensors were incorrectly assigned to another switch.

MIB on the device is not the preferred MIB that is being polled.

Modify the widget thresholds to filter out the false positives.

Restart SNMP on the device to refresh the hardware statistics.

16. Which two of the following requirements must be met to detect duplex mismatches? (Choose two.)

nodes must be described in MIB

nodes must be in "up" status

nodes must be in 'warning' status

nodes must be monitored

17. Which three of the following flow protocols does hybrid cloud observability support? (Choose three.)

J-Flow

NetFlowv6

NetFlowv9

sFlow

18. Which three of the following steps should be taken to troubleshoot a ‘test failed’ result for SNMP nodes in hybrid cloud observability? (Choose three.)

Add remote site node and confirm firewall rules are configured to allow SNMP traffic.

Confirm the use ofSNMPv3 with authentication keys.

Verify the node can be pinged from the application server.

Verify the SNMP service on the node has been restarted after changing the community string.

19. SNMP traps are being received from several devices. While most of the traps are normal, traps from one of the devices contain fields that are unreadable. The device is not being monitored in any other way.

Which two of the following points should be checked? (Choose two.)

Verify the device is not using SNMFV3 and is added as a node.

Verity the device supports hybrid cloud

Verify the device supports SNMP and is added as a node.

Verify the device's MIBfile is in SolarWinds' MIB database.

20. Which two of the following statements explain creating alerts for NBAR2 applications? (Choose two.)

Applications and NBAR2 applications in top applications are sorted by bits.

Applications and NBAR2 applications in top applications are sorted by bytes.

It is not possible to combine applications and NBAR2 applications.

It is possible to combine applications and NBAR2 applications.

Page 3 of 5

21. A “no data” message is displayed in NetFlow charts.

How can this be resolved?

Confirm account has viewing permissions.

Refresh the current window.

Restart collector service.

Shorten the time for view and resource.

22. Which two of the following locations can be checked for network hardware health functionality? (Choose two.)

device view

node properties

list resources

manage sensors

23. Network wide node and interface changes were recently made to several fields including names and IP addresses on nodes, captions, and aliases for their interfaces. Those changes are not updated in the hybrid cloud observability web console, even if a new polling is forced.

What should be done to resolve the issue?

Delete and re-add each of the nodes and their interfaces.

Manually update the changed information in each poller.

Run a rediscovery on both nodes and interfaces to refresh the data.

Run a rediscovery on the node, which will also update the interfaces.

24. NetFlow and CBQoS monitoring can be disabled through web console settings. If NetFlow monitoring is disabled for a node or interface, the data collection is stopped.

Which two of the following statements are true regarding disabling NetFlow monitoring? (Choose two.)

enabling and disabling flow collection can result in gaps within NTA graphs

enabling and disabling flow collection will not cause gaps within NTA graphs

historical data is retained within the database

historical data is removed from the database

25. Which two of the following tasks must be accomplished to monitor servers and connections in a load-balancing environment? (Choose two.)

add Cisco Nexus device in network device configuration manager

add Cisco Nexus device in network health / performance monitoring

enable CLI polling

enable F5 iControl polling

26. One NetPath probe is showing a “no data found” error, however other probes are returning data without issue.

What is the most likely resolution?

add the probe ID to the engines table manually

delete the probe, reinstall the agent manually, and re-add the probe

probe was added in NetPath without an agent installed on its node

restart the SolarWinds agent service on the node

27. It is noted in flow source view that some devices are showing “never received” in the last received flow column. It is verified that the flows are not being blocked by a firewall.

What is the likely cause?

flows are IPv6 and not supported by the network monitoring features

interface is no longer monitored by the network monitoring features

node is no longer monitored by the monitoring features

a primary field of data is missing and being dropped

28. Upon logging into the web console to check node statuses, it is noted that several nodes display a “down” status when they are up and running.

Which two of the following situations are the likely causes of this issue? (Choose two.)

ICMP blocked from polling engine to target node

node status must be set to au management

nodes using incorrect SNMP credentials

polling interval set to value other than default

29. 1.Which three of the following actions are native log entry actions? (Choose three.)

add a tag to the log entry

continue rule processing but do not save

halt further rule processing for the log entry

send an email notification

30. A probe is to be built to test connections to Office 365 from two different locations.

How would this be accomplished?

Create a probe, duplicate it, and change the source agent to the agent in another location.

Create both probes on hybrid cloud observability (HCO) server and designate each location.

Create two probes and assign each to an agent in each location.

Create two probes and assign each to an agent in one location.

Page 4 of 5

31. Which two of the following Windows versions are supported for log collection in hybrid cloud observability? (Choose two.)

Windows 10

Windows server 2012

Windows server 2019

Windows Vista

32. Which two of the following requirements are needed to set up network devices and export NetFlow data? (Choose two.)

Each device can be optionally configured to export NetFlow data to SolarWinds’ NT

Each device that exports NetFlow data to SolarWinds’ NTA must be monitored in NC

Each device that exports NetFlow data to SolarWinds’ NTA must be monitored in NP

The interface through which a device exports NetFlow data must be monitored in NP

33. Which option is available when choosing the collect Windows events without an agent so that Windows event logs can be recognized?

Convert Windows events to log files with SolarWinds event log forwarder.

Convert Windows events to svslog with SolarWinds event log forwarder.

Convert Windows events to traps with SolarWinds event log forwarder.

Convert Windows events to VMware with SolarWinds event log forwarder.

34. Which tool is used to establish flow alerts?

create alert flows

create a flow alert panel

flow alert wizard

manage flow alert pane

35. What is the correct sequence of steps to create a device studio poller?

Assign the poller to node, select the technology, specify the data source, and save the poller.

Select the technology, assign the poller to node, specify the data source, and save the poller.

Select the technology, specify the data source, assign the poller to node, and save the poller.

Select the technology, specify the data source, save the poller, and assign the poller to node.

36. A new node has been added to hybrid cloud observability; however, certain data being polled on similar devices is not being polled on the new node.

How can this be resolved?

assign existing universal device poller (UDP) to new node

assign the new node to the same polling engine

UDP must be re-created for new node

verily the credentials for the new node are valid

37. On which two of the following port does log analyzer listen for TCP syslog messages? (Choose two.)

162

514

1463

6514

38. A network discovery profile for a network area completes with most devices discovered, except for a few SNMP enabled network devices. These undiscovered devices are verified to be operational and respond to SNMP queries.

What could be the cause?

device MIB is not in SolarWinds' MIB database

discovery timeout value is set too low

no SNMP pollers match the device

SNMP community strings in profile are invalid

39. Which three of the following data points does NetFlow use to confirm traffic is in the same flow? (Choose three.)

interface name

IP address

L3 protocol

port number

40. Which custom poller supports interface traffic, UPS battery status, and CPU temperature?

device studio

hardware health

universal device poller

visualization integration

Page 5 of 5

41. Which NetFlow component can be applied to an interface to track IPv4 traffic?

flow exporter

flow monitor

flow record

Iflow sampler

42. Which tool presents live flow traffic data sourced from / to a main polling engine server, providing basic insight into traffic on the main polling engine?

CBQoS/flow sources

collector service

flow navigator

local NetFlow source

43. How is HA mode monitored and configured for site-to-site VPN tunnels within a Cisco ASA firewall?

Agent > CLI Polling

SNMP > CLI Polling

SNMP > ICMP > CLI Polling

WMI > ICMP > CLI Polling

44. Which two of the following locations can hardware health be enabled? (Choose two.)

asset inventory

list resources

main settings

manage MIB

45. Which two of the following best practices are used when creating a universal device poller (UDP)? (Choose two.)

Call SolarWinds support for object ID (OID) options.

Consult vendor documentation for OI

Perform SNMPwalk to determine if OID exists.

Run WBemtest to test communication to OI

46. Which status rollup mode displays groups defined as collections of redundant or backup devices?

show best

show mixed

show worst

show zero

TAGS:

Hybrid Cloud Observability Network Monitoring, Hybrid Cloud Observability Network Monitoring exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

Valid SCP-NPM Exam Dumps are Your best Choice to Pass

If you are looking to take your career in SolarWinds Certified Professional to the next level, the SCP-NPM certification is...

Get Hybrid Cloud Observability Network Monitoring Dumps Full Version

Q&As: 151
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm