NCP-CI-Azure Exam Dumps – Reliable Way to Pass and Get Certified

If you are looking for a reliable and comprehensive way to prepare for your NCP-CI-Azure certification exam, look no further than NCP-CI-Azure exam questions. These NCP-CI-Azure exam dumps questions are designed to help you assess your knowledge, identify your strengths and weaknesses, and improve your chances of passing the exam on the first try. These NCP-CI-Azure dumps questions cover all the topics and concepts that are essential for the NCP-CI-Azure exam, so you can be sure that you are fully prepared. Test Nutanix NCP-CI-Azure free dumps below.

Page 1 of 3

1. An organization want to use existing Azure resources to deploy NC2.

What is a valid requirement to use existing Azure resources for this task?

More than two DNS servers must be used.

A new Azure resource group must be created where all resources, such as VNets must be created.

Azure NAT gateway must be attached to the cluster management Prism Central, and external Flow Gateway subnets.

The fastpathenabled tag must be added after creating a NAT gateway.

 Loading...

2. Which service enables the monitoring of key metrics on various Azure services, including virtual networks, virtual machines, and bare metal hosts for an NC2 cluster?

Azure Monitor

Resource Manager

Azure Service Health

Azure Network Watcher

 Loading...

3. An administrator has recently deployed an NC2 on azure cluster, but does not have connectivity back to the on-premises environment. The administrator would like to start working on configuring the new cluster.

What is the best way to get access to Prism Central?

Deploy a Jump Host in an external VNet and peer the VNets for communication between Prism Central VNet and the Jump Host VNet.

Deploy a Jump Host instance in the same subnet as the bare-metal.

Deploy a Jump Host in an external VNet and peer the VNets for communication between bare-metal VNet and the Jump Host VNet.

Deploy a Jump HostInstanceIn the Prism Central VNet inside a delegated subnet

 Loading...

4. After creating a new Nutanix User VPC, what is needed to allow traffic to flow out of the Flow gateway VM when using the NATed Path?

Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.

Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.

Add a default route on the Nutanix User VPC of 0.0.0.0/0 to the External Overlay network.

Edit the External Flow Gateway Security Group on the External NIC to allow outbound traffic. Edit the Internal Flow Gateway Security Group on the internal NIC to allow outbound taffic

 Loading...

5. An administrator has noticed the company’s NC2 free trial expired 60 days ago.

What should the administrator do to continue using all of the NC2 features on existing clusters?

Switch to a paid subscription plan.

Nothing. The clusters will have full feature support.

Contact the cloud vendor.

Contact Nutanix support to redeploy the cluster.

 Loading...

6. An organization uses a Pay As. You Go subscription plan and wants to pay directly to Nutanix.

What is a valid payment method available to pay directly to Nutanix?

Via Wire Transfer

Via Credit Card

Via Physical Check

Via Online Payment Platform

 Loading...

7. An administrator is trying to determine which type of DNS server to deploy for a networking infrastructure in Azure.

Which DNS server option would require either VPN or ExpressRoute connectivity?

Cloudflare

Azure

On-premises

Google

 Loading...

8. Which console must be used to deploy a Nutanix cluster on Azure?

Prism Central Console

NC2 Console

Azure Console

Prism Element Console

 Loading...

9. An administrator has setup a routed external network (No NAT) to use for workload running in NC2 clusters on Azure.

The applications are network intensive, so four gateways VMs have been deployed to meet the high demands. One application server on the NC2 clusters is sending traffic to an outside Azure service.

How many flow gateway VMs will be used to distribute the traffic?

All four Flow Gateway instances will be used based on the ECMP default route that points 3 the external subnets in the Nutanix Transit VPC, but only for sending traffic. Return traffic by use one Flow Gateway V

two flow gateway instances will be used based on limitations from using MAC addresses to redistribute traffic.

Only one Flow Gateway instance will be used per source application running on NC2.

All four Flow Gateway instances will be used based on the ECMP default route that points to the external subnets in the Nutanix Transit VPC for sending and receiving traffic.

 Loading...

10. When selecting the NC2 subscription plan from the Nutanix billing portal, which options are available?

Pay-as-you-Go (payG), Bring your own License (BYOL)

Reserved instances, Cloud Provider Credits, Bring your own License (BYOL)

Reserved instances, Bring your own License (BYOL)

Pay-as-you-Go (PayG), Cloud Provider Credits, Bring you own License (BYOL)

 Loading...

Page 2 of 3

11. An administrator is planning to expand an NC2 on Azure cluster.

Which statement is true regarding prerequisites for expanding the cluster?

Cluster must be in a Cluster Stopped state.

Cluster must have at least three nodes.

Cluster must be in a Cluster Connected state.

Cluster must have at least five nodes.

 Loading...

12. A company needs to establish connectivity between the on-premises datacenter and Azure. The company does not have the infrastructure for a dedicated connection.

Which method will best satisfy this requirement?

Azure Virtual WAN

VPN

VNet Peering

ExpressRoute

 Loading...

13. A new subnet needs to be created within Flow Virtual Networking to accommodate a new type of workload in the company a’s NC2 Azure instance.

Which type of network will satisfy this task?

Underlay

Overlay

VPC

VNET

 Loading...

14. An administrator needs to extend an on-premises subnet to an NC2 cluster on Azure.

Which set of options should the administrator configure to complete this task?

Subnet Type: VPC subnets Traffic Type: IPv4 unicast traffic and ARP On-premises Hypervisor: ESXi, AHV, Hyper-V

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic IPv6 unicast traffic and ARP On-premises Hypervisor: ESXi and AHV

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv4 unicast traffic and ARP On-premises Hypervisor: AHV

Subnet Type: On-premises VLAN subnets and VPC subnets Traffic Type: IPv6 umcasi traffic and ARP On-premises Hypervisor: Hyper-V

 Loading...

15. An administrator needs to ensure API calls are executing successfully from NC2 to manage Azure resources.

Which cluster outbound to Azure connections are required to satisfy this task?

azure-support.nutan/x.com

portal.azure.com

managementazure.com

apikeys.nutanix.com

 Loading...

16. Which address must Azure Directory Service be able to resolve when deploying a new NC2 cluster?

Download.cloud.nutanix.com

Apikeys.nutanix.com

Gateway-external-api.cloud.nutanix.com

Gateway-internal-api-cloud.nutanix.com

 Loading...

17. An administrator is planning an NC2 deployment in Azure and wants to connect the company’s on-premises datacenter to the cloud environment.

What connectivity solution should the administrator use to avoid traffic between the locations flowing over the public internet?

ExpressRoute

Site-to-Site VPN

Point-to-Site VPN

VTEP Gateways

 Loading...

18. An administrator must ensure that certain NC2 VMs can access Azure resources. The NC2 VM traffic must not traverse the internet.

How would the administrator achieve this?

By creating an Azure Private Endpoint for VMs in a Delegated Subnet

By creating an Azure Private Endpoint for VMs in a NAT network via vWA

By creating an Azure Private Endpoint for VMs in a No-NAT network via vWA

By creating an Azure Private Endpoint for VMs in the host-mgmt subnet.

 Loading...

19. When configuring permissions for an Azure subscription, which role is required to delegate minimum permissions for the Azure AD App registration?

Azure user Access Administrator role

Azure Reader role

Azure Contributor role

Azure Custom role defined by Nutanix

 Loading...

20. An administrator is tasked with configuring connectivity between an on-premises datacenter and Azure.

Which two connectivity options are supported? (Choose two.)

VPN

Direct Connect

ExpressRoute

Leased Line

 Loading...

Page 3 of 3

21. Native Azure VMs exist in a subnet (10.20.80.0/20) in the Prism Central VNet that need access to the workload running on the Nutanix User.

What needs to be modified to allow access from the native Azure VMs to the workloads running in the Nutanix User VPC?

Remove the ERP value on the transit VPC and Nutanix User VP

Change the ERP value to the the subnet range of the native Azure VMs (10.20.80.0/20) on the Transit VPC and the Nutanix User VP

Adjust the Inbound Network Security Group on the Flow Gateway VM External NIC to allow traffic 102030.0/20.

Adjust the Inbound Network Security Group on the Flow Gateway VM Internal NIC to allow traffic 102030,0/20.

 Loading...

22. What action is performed in Azure when an instance is reported as being in a terminated state, but NC2 expects it to be in a running state?

NC2 restarts the AHV host.

NC2 alerts the administrator that a manual replacement is required.

NC2 automatically reconnects with the instance.

NC2 condemns the host and triggers replacement of the host.

 Loading...

23. Exhibit.





An administrator is trying to create an NC2 cluster in Azure, but does not see the required region in the drop-down list.

Which two steps could the administrator take to resolve this issue? (Choose two.)

Check the Azure subscription is created in the correct region.

Check the list of regions specified under the NC2 organization cloud account.

Check the NC2 Billing console to ensure the region is listed.

Ensure that the Azure region is whitelisted for use by Microsoft in the subscription.

 Loading...

 Loading...