NSE6_FSW-7.2 Dumps Questions Increase Your Chance of Success

Passing the NSE6_FSW-7.2 certification exam can be challenging, which is why practicing with NSE6_FSW-7.2 questions can greatly increase your chances of success. Fortinet NSE6_FSW-7.2 dumps questions help you become familiar with the exam format. The NSE6_FSW-7.2 questions are designed to mimic the actual exam, which means that you'll get a feel for the types of questions you'll encounter, the difficulty level, and the time limit. All the NSE6_FSW-7.2 exam dumps questions are the latest version for you to study. Test free NSE6_FSW-7.2 exam questions below.

Page 1 of 2

1. Refer to the configuration:





Which two conditions does FortiSwitch need to meet to successfully configure the options shown in the exhibit above? (Choose two.)

The FortiSwitch model is equipped with a maximum of 54 interfaces

FortiSwitch would need to be rebooted.

The split port can be assigned to a native VLA

The Dort full speed prior to the split was 100G QSFP+.

 Loading...

2. Exhibit.





The exhibit shows the current status of the ports on the managed FortiSwitch.

Access-1.

Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?

Port23 is a member of a trunk that uses the Access-1 FortiSwitch senal number as the name of the trunk.

Port23 is configured as the dedicated management interface.

A standalone switch with the showm serial number is connected on por123.

Ports connect to adjacent FortiSwitch devices will show their.serial number as the na-tive VLAN

 Loading...

3. How are the 'by VLAN redirect MAC address quarantine' mode and the 'by redirect MAC address quarantine' mode on FortiGate similar?

Both modes move quarantined devices to the quarantine VLA

Both modes require firewall policies to block inter-VLAN traffic.

Both modes add quarantined device MAC addresses to the blocked firewall address group.

Both modes block intra-VLAN traffic by FortiGate automatically.

 Loading...

4. Which statement about 802.1X security profiles using MAC-based authentication mode is true?

FortiSwitch allows connectivity to all hosts connected to a port, if one host is authenticated.

FortiSwitch can grant each device a different access level based on the credentials provided

FortiSwitch performs faster when using this security mode on the ports.

FortiSwitch must communicate with the RADIUS server to authenticate devices

 Loading...

5. What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?

POE with high density FortiSwitch

FortiGate managing FortiSwitch

FortiSwitch functioning as standalone

HA backup FortiGate managing FortiSwitch

 Loading...

6. Which two statements about DHCP snooping enabled on a FortiSwitch VLAN are true? (Choose two.)

Enabling DHCP snooping on a FortiSwitch VLAN ensures requests and replies are seen by all DHCP servers.

switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks.

By default, all FortiSwitch ports are set to forward client DHCP requests to untrusted ports.

Settings related to DHCP option 82 are only configurable through the CLI

 Loading...

7. In which two ways can you assign a FortiSwitch port to a VDOM using multi-tenancy setup? (Choose two.)

Switch the FortiLink interface to the target VDO

Remove the managed FortiSwitch and allocate ports directly on FortiSwitch.

Create a virtual port pool on the FortiGate CL

Assign a port to a VDOM directly on the managed FortiSwitch.

 Loading...

8. Exhibit.





Which configuration change will allow the managed FortiSwitch to accept SNMP requests from any source?

Create a new local access profile for SNMP only.

Enable SNMP on the internal interface of the switch.

Configure an SNMP host to send SNMP traps.

Add SNMP service on the management interface of the switch.

 Loading...

9. What type of multimode transceiver can be used to split a 40G port?

QSFP+ transceiver

SFP transceiver

QSFP transceiver

SFP+ transceiver

 Loading...

10. Which statement about the quarantine VLAN on FortiSwitch is true?

Quarantine VLAN has no DHCP server

Users who fail 802.1X authentication can be placed on the quarantine VLA

It is only used for quarantined devices if global setting is set to quarantine by VLA

FortiSwitch can block devices without configuring quarantine VLAN to be part of the allowed VLANs.

 Loading...

Page 2 of 2

11. How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?

FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces.

FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.

FortiGate configures and enables flow sampling on FortiSwitch but does not change existing sampling settings of interfaces.

FortiGate configures and enables egress sampling on all management interfaces.

 Loading...

12. Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)

All hosts behind an authenticated port are allowed access after a successful authentica-tion.

A security policy is used to apply 802.1 authentication on a port.

A local user database must be used to authenticate devices using the 802.1X authentica-tion protocol.

All devices connecting to FortiSwitch must support 802.1X authentication.

 Loading...

13. Which statement about using MAC, IP, and protocol-based VLANs on FortiSwitch is true?

It is a scalable and secure solution in comparison to other Layer 2 security measures.

FortiSwitch uses only the Ethernet type to assign traffic to VLANs.

It provides benefits that can be obtained when using 802.1X authentication.

Endpoints are required to use the same FortiSwitch port to remain members of the VLA

 Loading...

14. Exhibit.





What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)

The FortiSwitch model is equipped with a maximum of 54 interfaces.

The CLI commands are enabling a splitport into four 10Gbps interfaces.

The port full speed prior the split was 100G SFP+

The split port can be assigned to native VLAN

 Loading...

15. How does FortiSwitch perform actions on ingress and egress traffic using the access control list (ACL)?

Only high-end FortiSwitch models support AC

ACL can be used only at the prelookup stage in the traffic processing pipeline.

Classifiers enable matching traffic based only on the VLAN I

FortiSwitch checks ACL policies only from top to bottom.

 Loading...

16. Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network devices and determine their characteristics?

Network policy

Power management

Location

Inventory management

 Loading...

17. To enhance service in emergency situations, to which LLDP-MED Type-Length-Values does Forti-Switch advertise to IP phones?

Network policy

Inventory management

Location

Power management

 Loading...

 Loading...