Online CFPS Exam Dumps Help You Build Confidence

Category:

Comments:

0 Comments

Post Date:

October 3, 2024

Practicing with Fire Protection Specialist CFPS exam dumps questions can help you build confidence and reduce exam anxiety. By familiarizing yourself with the types of questions you can expect to see on the CFPS Certified Fire Protection Specialist (CFPS) exam and mastering the concepts and skills required to answer them, you can approach the exam with greater confidence and a sense of calm. Besides, CFPS dumps questions can help you achieve this level of knowledge and confidence. Study free NFPA CFPS exam dumps below.

Page 1 of 6

1. The total complex of douses factories offices and schools in which we live and work is commonly known as______.

The community

The built environment

The engineering domicile

The designed environment

2. What is the occupancy factor used by the Insurance Services Office (ISO) for computing required fire flow for C-3 (Combustible)?

0.75

0.85

1.00

1.15

3. What type of detector is constructed using a stainless steel tubing or outer later over a ceramic thermistor core protecting a center conductor?

Line-type/bnear heat detector

Spot heat detector

Fiber optic neat detector

Bimetallic neat detector

4. OSHA requires fire fighter training in hazardous materials, respiratory protection, and

emergency communications.

communicable diseases.

live fire training.

emergency medical services.

5. Zebra mussel pipe obstructions are largely concentrated around the Great Lakes and

Colorado River areas.

Mississippi River areas.

Lake Mead areas.

Salt Lake areas.

6. The three levels of capability lot Technical Rescue Services ate Awareness, Operations and

Master

Specialist

Technician

Journeyman

7. Special occupancies per NFPA 13 include___________.

Laboratories

Theaters

Hospitals

Wood product assembly

8. How many additional switches or circuit breakers are allowed for a separate service?

9. Which extinguishing agent can break down during flame extinguishment to form a weak acid that can cause respiratory and eye irritations?

Inert clean agent

Carbon dioxide

Water

Halocarbon clean agents

10. What NFPA code contains requirements for the installation of gas-tired restaurant cooking appliances?

101

105

Page 2 of 6

11. Which limit point is considered the total head of a fire pump characteristic curve when it is operating at rated speed and there is no flow into the fire protection system?

Net positive suction head

Shutoff pressure

Rated flow and pressure

Overload point

12. Response Time Index (RTI) is a value applicable to

Amount of time required for water to reach the most remote sprinkler.

Measure of thermal sensitivity of the air evacuation device of a dry pipe sprinkler system.

Measure of thermal sensitivity of a sprinkler's activation.

Measure of thermal sensitivity of a wet pipe sprinkler system's alarm device.

13. Which of the following clean fire extinguishing agents has an ISO Class B minimum extinguishing concentration of 36.2%?

HFC-23

IG 541

IG 55

Halon 1301

14. How many extra sprinklers should be kepi for a system size of more than 1000?

6 sprinklers

12 sprinklers

14 sprinklers

48 sprinklers

15. Which type of fire alarm system transmits signals that are permanently recorded at a constantly attended supervising station located either at the protected premises or at another location of the property owner?

Proprietary

Auxiliary

Central station

Remote station

16. Fire alarm systems utilize what three (3) basic types of circuits?

IDC, SLC, and NAC

Class A,

and C

LEL, HEL, and MEL

IDP, SIP, and NAP

17. The Class of an unstable reactive gas that readily undergoes violent chemical change at elevated temperatures and pressures is

18. Wildfires can have far-reaching impacts on the natural environment.

Which tool can help land managers to create plans for landscape repair to minimize post-fire impacts on water supplies and other sensitive ecosystems?

Early detection cameras

Satellite imagery

Deployable heat detectors

Electronic data collection

19. What are the minimum secondary power supply requirements for a protected premises system?

24 hours of standby power followed by 2 hours of emergency operation

24 hours of standby power followed by 15 minutes at maximum connected load

24 hours of standby power followed by 1 hour of emergency operation

24 hours of standby power followed by 5 minutes of alarm

20. The incident command system (ICS) under the National Incident Management System (NIMS) has how many major functional areas?

Page 3 of 6

21. Wn.cn class of fire-retardant roof coverings are effective against light fire exposures, and afford at least a slight degree of fire protection to the root decks?

Class A coverings

Class B coverings

Class C coverings

Class D coverings

22. Typical fire pump drivers reach maximum brake horsepower between

65-85% of rated capacity.

90-100% of rated capacity.

110-125% of rated capacity.

140-170% of rated capacity.

23. What type of automatic sprinkler system has piping that is tilted with water all the time?

Manual-wot system

Automatic-wet system

Manual-dry system

Semiautomatic-wet

24. Which NFPA Standard provides requirements for the storage and handling of aluminum powders, flakes, and pastes?

491

484

495

472

25. in health care occupancies what percentage of fires are confined to the room of origin?

83%

96%

26. Below what population density will individuals move at their own speed independent of the speed of others around them?

0.025 person/ft2 (0.27 person/m2)

0.025 person/ft2 (0.54 person/m2)

0.025 person/ft2 (0.27 person/m2)

27. Of the sot loads and forces anticipated by building codes, which does not exert direct force on the structure?

Fire

Wind forces

Dead loads

Earthquaker forces

28. Which OSHA regulation addresses storage and handling of liquefied petroleum gas?

1910.107

1910.108

1910.110

1910.119

29. The primary design approach to mitigate the effect of wind on smoke movement in high-rise buildings is based on

outside temperature.

height of the building.

tightness of the building.

fire department access.

30. Fire alarm visible appliance source intensity is measured in

lux.

candela.

lumen.

foot candle.

Page 4 of 6

31. What are the two classes of fire models?

Open and closed

Field and laboratory

Physical and mathematical

Behavioral and theoretical

32. When evaluating the hydraulic properties of water for fire protection system, what is the

measurement of a fluid's

resistance to flow?

Velocity

Viscosity

Pressure

Density

33. Between 2014 and 2018 on average there were 464 civilian injuries in high-rise building fires, with what percentage occurring in a hospital hospice or nursing home?

34. What is the leading cause of home fires?

Heating equipment

Smoking

Electrical

Cooking

35. The temperature rating of an extra high sprinkler head with a purple glass bulb color is_______.

135-170’F(57-77X)

175-225'F(79-107'C)

250-300"F(121-149'C)

325-375’F(163-191"C)

36. All of the following Road Tunnel fire model types are used EXCEPT

field models.

zone models.

one-dimensional models.

two-dimensional models.

37. if a visual notification device (strobe) with an effective intensity of 60 candela effective (cd eff) was placed on the wall of a 20 ft x 20 ft (6.1 m x 6.1 m) room, what is the illumination in lumens/ft2 on the opposite wall?

A)

Option A

Option B

Option C

Option D

38. in public operating mode how many decibels above the 24-hour average must the sonic pressure level (SPL) produced by a fire alarm system reach?

5 db

12 db

15 db

20 db

39. Fire tests typically relate to two types of fire properties, fire resistance and

length of fire.

reaction to fire.

flame spread.

smoke spread.

40. Which of the following is a fixed-temperature Deal detector composed of eulectic metals that melt rapxliy at a predetermined temperature and are used as operating elements for heat detection''

Bimetalic type

Fiber optic linear type

Continuous line type

Fusible-element type

Page 5 of 6

41. Environmental Protection Agency standards require solid waste be treated as hazardous if it is a listed waste and/or meets the characteristics prescribed by the standard for toxicity, reactivity, corrosivity, and

solubility.

compactability.

ignitability.

treatability.

42. For combustion to take place, a combustible material, an oxidizing agent, and an ignition source are required. The exception is

dielectric heating.

spontaneous combustion.

conduction transfer.

radiation diffusion.

43. What is me rue alarm audibility goal tor a public operating mode for the sound pressure level (SPL)?

5 dB or 15 dB above ambient

15 dB or 25 dB above ambient

25 dB or 35 dB above ambient

There is no minimum

44. What percent of fire departments surveyed participate in the delivery of emergency medical services?

38%

61%

79%

90%

45. A value system designed to have a duration of four (4) hours would allow a maximum fire flow of______.

2.500gpm(9,463L/min)

3, 500 gpm (13.248 L/min)

4, 500 gpm (17.033 L/min)

5, 500 spm (20.818 L/min)

46. What type of standpipe system provides 2 1/2 in. (65 mm) hose connections at designated locations in a building for use by the fire department?

Class IV

Class III

Class II

Class I

47. How long must an emergency voice alarm communications system be capable of operating at maximum connected load (an input devices and output appliances operating) after a 24- hour standby period?

15 minutes

30 minutes

45 minutes

60 minutes

48. Sound meters used to test notification appliances in fire alarm systems shall comply with which standard?

NFPA 70

NFPA 72

ANSI S12.13

ANSI S1.42

49. When using water mist as an extinguishing mechanism, the effectiveness of a fine mist depends on

the ability of the mist to directly spray on the fire.

how much mist diverts to the compartment boundaries.

how much conductive heat the mist system will absorb.

the momentum and direction of the spray relative to the fire.

50. What type of process hazard analysis program addresses the prevention of flammable and hazardous materials released from containment?

Fault tree

Process safety

Management of change

Mechanical integrity

Page 6 of 6

51. In the field of Fire and Lite Safely Education, which type of message is designed to persuade the receiver to behave in a certain way?

Information message

Behavioral message

Awareness message

Reactional message

52. The greatest number of civilian home fire deaths can be attributed to what area of fire origin in the home?

Kitchen or cooking area

Heating equipment room

Garage or vehicle storage area

Common room, living room

53. The three basic calculation methods used to determine rate of fire flow are the Royer/Nelson. US National Fire Academy, and_________.

Hazen Williams

Venturi principle

Sprinkler calculations

Bernoulli calculation

54. At what temperature do cellulose nitrate products begin to decompose?

581° F (305° C)

425° F (218° C)

350° F (177° C)

300° F (150° C)

55. NFPA 1982 requites PASS devices to_________.

Automatically activate when the air supply is turned on

Display a readout snowing residual power

Allow wearer control when outside of the hot zone

To be integrated as part of the SCBA backplate

56. NFPA 25 requires initial testing of representative samples of fast response sprinklers after

5 years.

10 years.

20 years.

50 years.

57. At what temperature do cellulose nitrate products begin to decompose?

581° F (305° C)

425° F (218° C)

350° F (177° C)

300° F(150°C)

TAGS:

CFPS, CFPS exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Posts

CWBSP Dumps Questions – Effective Way to Get Certified

If you're in the field of NFPA, you know how important it is to stay up-to-date with the latest knowledge...

Get CFPS Dumps Full Version

Q&As: 189
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm