Online FCP_FAZ_AD-7.4 Dumps Help You Understand Questions Well

Category:

Comments:

0 Comments

Post Date:

October 6, 2024

If you're interested in pursuing the FCP in Network Security certification, it's important to understand the exam format and the types of questions you can expect. This is where FCP_FAZ_AD-7.4 questions come in. FCP_FAZ_AD-7.4 exam dumps questions are designed to simulate the actual certification exam, providing you with a deeper understanding of the exam format and what to expect on test day. By taking practice exams and reviewing FCP_FAZ_AD-7.4 questions, you can identify areas where you may need to focus your studying. Study free FCP_FAZ_AD-7.4 exam dumps below.

Page 1 of 6

1. Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.

What is the most likely problem?

CPU resources are too high

Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device

The total disk space is insufficient and you need to add other disk

The ADOM disk quota is set too low, based on log rates

2. Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)

License type

Disk size

Total quota

RAID level

3. Which statement when you are upgrading the firmware on an HA cluster made up of three FortiAnalyzer devices is true?

You can perform the firmware upgrade using only a console connection.

All FortiAnalyzer devices will be upgraded at the same time.

Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade.

First, upgrade the secondary devices, and then upgrade the primary device.

4. Which statement is true about sending notifications with incident updates?

Notifications can be sent only when an incident is updated or deleted.

If you use multiple fabric connectors, all connectors must have the same notification settings

Notifications can be sent only by email.

You can send notifications to multiple external platforms

5. In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.

How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?

Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve

Configure # set resolve-ip enable in the system FortiView settings

Configure local DNS servers on FortiAnalyzer

Resolve IP addresses on FortiGate

6. What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server? (Choose two.)

SFTP, FTP, or SCP server

Mail server

Output profile

Report scheduling

7. Which statement about the communication between FortiGate high availability (HA) clusters and FortiAnalyzer is true?

If devices were registered to FortiAnalyzer before forming a cluster, you can manually add them together.

FortiAnalyzer distinguishes each cluster member by the IP addresses in log message headers.

If the HA primary device becomes unavailable, you must remove it from the HA cluster list on FortiAnalyzer.

The FortiGate HA cluster must be in active-passive mode in order to avoid conflict.

8. What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?

There is no need to do anything because the disk will self-recover.

Run execute format disk to format and restart the FortiAnalyzer device.

Perform a hot swap of the disk.

Shut down FortiAnalyzer and replace the disk.

9. You need to upgrade your FortiAnalyzer firmware.

What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?

FortiAnalyzer uses log fetching to retrieve the logs when back online

FortiGate uses the miglogd process to cache the logs

The logfiled process stores logs in offline mode

Logs are dropped

10. View the exhibit.

What does the data point at 14:35 tell you?

FortiAnalyzer is dropping logs.

FortiAnalyzer is indexing logs faster than logs are being received.

FortiAnalyzer has temporarily stopped receiving logs so older logs’ can be indexed.

The sqlplugind daemon is ahead in indexing by one log.

Page 2 of 6

11. An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.

What can be the problem?

ADOM mode is configured with Advanced mode.

A trusted host is configured.

fortinet is assigned the default Standard_User administrative profile.

fortinet is assigned the default Restricted_User administrative profile.

12. In a Fortinet Security Fabric, what can make an upstream FortiGate create traffic logs associated with sessions initiated on downstream FortiGate devices?

The traffic destination is another FortiGate in the fabric.

The upstream FortiGate is configured to do NAT

Log redundancy is configured in the fabric.

The downstream device cannot connect to FortiAnalyzer.

13. Which two statements are true regarding fabric connectors? (Choose two.)

Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer AP

Fabric connectors allow to save storage costs and improve redundancy.

Storage connector service does not require a separate license to send logs to cloud platform.

Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob, and Google Cloud.

14. Which log will generate an event with the status Contained?

An IPS log with action=pass.

A WebFilter log with action=dropped.

An AV log with action=quarantine.

An AppControl log with action=blocked.

15. Which two actions should an administrator take to view Compromised Hosts on FortiAnalyzer? (Choose two.)

Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer.

Make sure all endpoints are reachable by FortiAnalyzer.

Enable device detection on an interface on the FortiGate devices that are connected to the FortiAnalyzer device.

Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.

16. Which two statements about log forwarding are true? (Choose two.)

Forwarded logs cannot be filtered to match specific criteria.

Logs are forwarded in real-time only.

The client retains a local copy of the logs after forwarding.

You can use aggregation mode only with another FortiAnalyzer.

17. What does the disk status Degraded mean for RAID management?

One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the operating system.

The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array fault tolerant.

The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard drive to an optimal state.

The hard driveiIs no longer being used by the RAID controller

18. Refer to the exhibit.

Which image corresponds to the packet capture shown in the exhibit?

A)

Option A

Option B

Option C

Option D

19. After generating a report, you notice the information you were expecting to see is not included in it.

What are two possible reasons for this scenario? (Choose two.)

You enabled auto-cache with extended log filtering.

The logfiled service has not indexed all the expected logs.

The logs were overwritten by the data retention policy.

The time frame selected in the report is wrong.

20. What remote authentication servers can you configure to validate your FortiAnalyzer administrator logons? (Choose three)

RADIUS

Local

LDAP

PKI

TACACS+

Page 3 of 6

21. An administrator has configured the following settings:

What is the purpose of executing these commands?

To record the hash value and authentication code of log files.

To encrypt log transfer between FortiAnalyzer and other devices.

To create the secure channel used by the OFTP process.

To verify the integrity of the log files received.

22. Which two statements about FortiAnalyzer operating modes are true? (Choose two.)

When in collector mode, FortiAnalyzer offloads the log receiving task to the analyzer.

When in analyzer mode, FortiAnalyzer supports event management and reporting features.

For the collector, you should allocate most of the disk space to analytics logs.

Analyzer mode is the default operating mode.

23. What is required to authorize a FortiGate on FortiAnalyzer using Fabric authorization?

A FortiGate ADOM

The FortiGate serial number

A pre-shared key

Valid FortiAnalyzer credentials

24. Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)

ADOMs are enabled by default.

ADOMs constrain other administrator’s access privileges to a subset of devices in the device list.

Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per ADO

All administrators can create ADOMs--not just the admin administrator.

25. In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered search results.

Similarly, which feature you can use for FortiView?

Export to Report Chart

Export to PDF

Export to Chart Builder

Export to Custom Chart

26. If you upgrade your FortiAnalyzer firmware, what report elements can be affected?

Output profiles

Report settings

Report scheduling

Custom datasets

27. An administrator has moved FortiGate A from the root ADOM to ADOM1. However, the administrator is not able to generate reports for FortiGate A in ADOM1.

What should the administrator do to solve this issue?

Use the execute sql-local rebuild-db command to rebuild all ADOM databases.

Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.

Use the execute sql-report run ADOM1 command to run a report.

Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.

28. Which statement about sending notifications with incident updates is true?

Notifications can be sent only when an incident is created or deleted.

You must configure an output profile to send notifications by email.

Each incident can send notifications to a single external platform.

Each connector used can have different notification settings.

29. You finished registering a FortiGate device. After traffic starts to flow through FortiGate, you notice that only some of the logs expected are being received on FortiAnalyzer.

What could be the reason for the logs not arriving on FortiAnalyzer?

FortiGate was added to the wrong ADOM type.

This FortiGate model is not fully supported.

FortiGate does not have logging configured correctly.

This FortiGate is part of an HA cluster but it is the secondary device.

30. A play book contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed.

What will be the status of the playbook after its execution?

Success

Failed

Running

Upstream_failed

Page 4 of 6

31. What does the disk status Degraded mean for RAID management?

The hard drive is no longer being used by the RAID controller.

One or more drives are missing from the FortiAnalyzer unit.

The device is writing data to the disk to restore the volume to an optimal state.

FortiAnalyzer determined that the parity data in the disk is not valid.

32. What are two advantages of setting up fabric ADOM? (Choose two.)

It can be used for fast data processing and log correlation

It can be used to facilitate communication between devices in same Security Fabric

It can include all Fortinet devices that are part of the same Security Fabric

It can include only FortiGate devices that are part of the same Security Fabric

33. An administrator has moved FortiGate A from the root ADOM to ADOM1.

Which two statements are true regarding logs? (Choose two.)

Analytics logs will be moved to ADOM1 from the root ADOM automatically.

Archived logs will be moved to ADOM1 from the root ADOM automatically.

Logs will be presented in both ADOMs immediately after the move.

Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.

34. A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see what activity was performed by that rogue administrator on FortiAnalyzer.

What can you do on FortiAnalyzer to accomplish this?

Click FortiView and generate a report for that administrator.

Click Task Monitor and view the tasks performed by that administrator.

Click Log View and generate a report for that administrator.

View the tasks performed by the rogue administrator in Fabric View.

35. Which two statements express the advantages of grouping similar reports? (Choose two.)

Improve report completion time.

Conserve disk space on FortiAnalyzer by grouping multiple similar reports.

Reduce the number of hcache tables and improve auto-hcache completion time.

Provides a better summary of reports.

36. If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?

Hot swap the disk

Replace the disk and rebuild the RAID manually

Take no action if the RAID level supports a failed disk

Shut down FortiAnalyzer and replace the disk

37. Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally? (Choose two.)

Mail server

Output profile

SFTP server

Report scheduling

38. Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)

Logs from registered devices

Database snapshot

Report information

System information

39. What is the recommended method of expanding disk space on a FortiAnalyzer VM?

From the VM host manager, add an additional virtual disk and use the #execute lvm extend command to expand the storage

From the VM host manager, expand the size of the existing virtual disk

From the VM host manager, expand the size of the existing virtual disk and use the # execute format disk command to reformat the disk

From the VM host manager, add an additional virtual disk and rebuild your RAID array

40. Which two methods are the most common methods to control and restrict administrative access on FortiAnalyzer? (Choose two.)

Virtual domains

Administrative access profiles

Trusted hosts

Security Fabric

Page 5 of 6

41. Which daemon is responsible for enforcing raw log file size?

logfiled

oftpd

sqlplugind

miglogd

42. View the exhibit.

Why is the total quota less than the total system storage?

3.6% of the system storage is already being used.

Some space is reserved for system use, such as storage of compression files, upload files, and temporary report files

The oftpd process has not archived the logs yet

The logfiled process is just estimating the total quota

43. Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy.

What is the most likely problem?

The total disk space is insufficient and you need to add other disk.

CPU resources are too high.

The ADOM disk quota is set too low based on log rates.

Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.

44. How can you configure FortiAnalyzer to permit administrator logins from only specific locations?

Use static routes

Use administrative profiles

Use trusted hosts

Use secure protocols

45. Which three RAID configurations provide fault tolerance on FortiAnalyzer? (Choose three.)

RAIDO

RAID 5

RAID1

RAID 6+0

RAID 0+0

46. For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)

Principal

Service provider

Identity collector

Identity provider

47. What statements are true regarding disk log quota? (Choose two)

The FortiAnalyzer stops logging once the disk log quota is met.

The FortiAnalyzer automatically sets the disk log quota based on the device.

The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.

The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based on the reserved system space.

48. The connection status of a new device on FortiAnalyzer is listed as Unauthorized.

What does that status mean?

It is a device whose registration has not yet been accepted in FortiAnalvzer.

It is a device that has not yet been assigned an ADO

It is a device that is waiting for you to configure a pre-shared key.

It is a device that FortiAnalvzer does not support.

49. How are logs forwarded when FortiAnalyzer is using aggregation mode?

Logs are forwarded as they are received and content files are uploaded at a scheduled time.

Logs and content files are stored and uploaded at a scheduled time.

Logs are forwarded as they are received.

Logs and content files are forwarded as they are received.

50. What are the operating modes of FortiAnalyzer? (Choose two)

Standalone

Manager

Analyzer

Collector

Page 6 of 6

51. 1.Which two statements regarding ADOM modes are true? (Choose two.)

In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advanced mode, the disk quota of the ADOM is flexible.

You can change ADOM modes only through the CL

In an advanced mode ADOM, you can assign FortiGate VDOMs from a single FortiGate device to multiple FortiAnalyzer ADOMs.

Normal mode is the default ADOM mode.

52. If you upgrade the FortiAnalyzer firmware, which report element can be affected?

Custom datasets

Report scheduling

Report settings

Output profiles

53. Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)

When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs in the original binary format.

Collector mode is the default operating mode.

When in collector mode. FortiAnalyzer supports event management and reporting features.

By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you can improve the overall performance of log receiving, analysis, and reporting

54. What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?

The endpoint is marked as Compromised and. optionally, can be put in quarantine.

FortiAnalyzer flags the associated host for further analysis.

A new Infected entry is added for the corresponding endpoint.

The detection engine classifies those logs as Suspicious

55. Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?

Log upload

Indicators of Compromise

Log forwarding an aggregation mode

Log fetching

TAGS:

FCP_FAZ_AD-7.4, FCP_FAZ_AD-7.4 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get FCP_FAZ_AD-7.4 Dumps Full Version

Q&As: 171
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Online FCP_FAZ_AD-7.4 Dumps Help You Understand Questions Well

Related

Posts

Test Online NSE7_SDW-7.2 Dumps Questions to Be Certified

FCP_ZCS_AD-7.4 Dumps Help You Study Objectives

Improve Your Knowledge with FCSS_NST_SE-7.4 Exam Dumps

FCP_FAZ_AN-7.4 Dumps Questions Increase Your Chance of Success

About Us

EMAIL

Services

Opening Hours