Pass 2V0-11.24 Exam to Get Vmware Certification

Category:

Comments:

0 Comments

Post Date:

December 30, 2024

The 2V0-11.24 exam is hot, and passing it requires a deep understanding of Vmware solutions. Practicing with Vmware 2V0-11.24 dumps questions can help you reinforce your knowledge and increase your chances of passing the exam. 2V0-11.24 dumps are available to help you prepare for the 2V0-11.24 exam. Using 2V0-11.24 exam dumps questions is one effective way to supplement your study plan and increase your chances of success on exam day. Test free VCP-VCF Administrator 2V0-11.24 exam dumps below.

Page 1 of 7

1. What is the first step in troubleshooting VMware Cloud Foundation deployment issues using vSphere?

Check the VMware Cloud Foundation logs

Review network connectivity settings

Ensure that the host is in maintenance mode

Verify that all components are properly installed

2. In the context of troubleshooting NSX issues in VMware Cloud Foundation, which of the following should be done first?

Reinstall NSX Manager

Verify network configuration for NSX components

Perform a firmware upgrade on NSX Edge devices

Check the vCenter Server logs for NSX-related errors

3. Match the VMware Cloud Foundation components to their respective functionalities.

VMware Cloud Foundation Component:

A) VMware NSX

B) VMware Aria Automation

C) VMware Tanzu

D) VMware vSAN

Functionality:

1) Automates cloud resource deployment

2) Provides network virtualization and security

3) Provides integrated Kubernetes clusters

4) Provides storage virtualization and management

A) 2, B) 1, C) 3, D) 4

A) 3, B) 1, C) 4, D) 2

A) 4, B) 3, C) 2, D) 1

A) 2, B) 3, C) 1, D) 4

4. Which of the following best practices should be followed when troubleshooting VMware Cloud Foundation SDDC Manager issues?

Reboot the entire SDDC Manager

Use the ‘sos’ CLI tool to collect logs

Check the vSphere HA settings for faults

Remove and reinstall SDDC Manager components

5. Which two components are integral for performing network optimization in VMware Cloud Foundation? (Select two)

VMware NSX

VMware Aria Operations for Networks

VMware vSAN

VMware vSphere

6. Which action is involved in configuring the NSX Edge Cluster during VMware Cloud Foundation installation?

Validate TEP configuration

Configure Data Center Network (DCN)

Deploy VMware vSphere using SDDC Manager

Install VMware vRealize Suite Lifecycle

7. Which two components are involved in scaling a VMware Cloud Foundation (VCF) environment?

Adding vCenter servers

Scaling the workload domains

Adding hosts to an existing cluster

Configuring NSX load balancer

8. Match the VMware Cloud Foundation component with its functionality.

VMware Cloud Foundation Component:

A) vSphere with Tanzu

B) vSAN

C) NSX

D) Aria Suite Lifecycle

Functionality:

1) Provides storage virtualization

2) Provides network virtualization

3) Provides compute and workload management

4) Automates lifecycle management for cloud applications

A) 2, B) 1, C) 3, D) 4

A) 3, B) 2, C) 1, D) 4

A) 3, B) 1, C) 2, D) 4

A) 1, B) 3, C) 2, D) 4

9. Which of the following components must be installed before deploying VMware Cloud Foundation management domain?

VMware vSphere only

VMware vCenter, vSAN, NSX, and SDDC Manager

VMware Aria Suite Lifecycle

Only the VMware vSphere management component

10. Which two use cases are supported by VMware Aria Operations for Logs in a VMware Cloud Foundation solution? (Select two)

Log management for monitoring and troubleshooting

Data replication between different VMware environments

Integration with AWS Lambda for cloud automation

Real-time log event analysis for performance optimization

Page 2 of 7

11. Which of the following is a primary component when configuring VMware Cloud Foundation networking for NSX integration?

NSX manager configuration

Storage policy configuration

Network segmentation for vCenter

Management network for ESXi hosts

12. During the deployment of a workload domain using SDDC Manager, which of the following is the primary consideration for storage configuration?

vSAN storage policy

Storage vMotion setup

Network connectivity configuration

Public cloud storage allocation

13. DRAG DROP

Arrange the steps in the correct order to resolve host connectivity issues.

14. How does VMware Cloud Foundation integrate NSX-T with vSphere?

NSX-T is deployed within the vSphere environment and manages vSphere networking

NSX-T replaces vSphere networking

NSX-T is used to manage storage within vSphere

NSX-T manages only external connections to vSphere resources

15. Deploy the vSAN cluster

16. What is the primary purpose of configuring Role-Based Access Control (RBAC) in vCenter?

To ensure vCenter runs on multiple operating systems.

To provide a method for vCenter to communicate with ESXi hosts.

To manage user access and permissions within the vCenter environment.

To enable vCenter integration with external storage systems.

17. When configuring a VMware Cloud Foundation NSX Edge cluster, which step must be performed first?

Configure the TEP (Tunnel Endpoint)

Add the edge transport nodes

Validate the BGP configuration

Install NSX Manager

18. As part of the preparation for deploying VMware Aria Suite Lifecycle, an administrator needs to create Application Virtual Networks (AVNs).

Which three steps are necessary to complete the configuration of AVNs? (Choose three.)

Setup routing policies for AVNs.

Configure the AVNs in the NSX Manager.

Assign AVNs to specific ESXi hosts.

Enable AVNs in the vCenter Server.

Define the IP address ranges for the AVNs.

19. When adding a host to a VMware Cloud Foundation domain, what must be pre-configured for the process to be successful?

Storage capacity and NSX-T configuration

Valid ESXi version and network settings

NSX Edge configuration and backup

vRealize Suite configuration and logging

20. A company wants to enhance the network virtualization and security capabilities within their VMware Cloud Foundation environment. The goal is to block traffic even between virtual machines connected to the same logical segment (L2 network) using micro segmentation.

Which component can achieve the company's goals?

VMware NSX Intelligence

Network Detection and Response

VMware vDefend

Intrusion Prevention System

Page 3 of 7

21. Which VMware Cloud Foundation solution is specifically designed for network operations within the cloud?

VMware NSX

VMware Aria Operations for Networks

VMware Tanzu

VMware HCX

22. What is the primary benefit of VMware Cloud Foundation using a stretched cluster across availability zones?

Reduces network latency between clusters

Provides high availability and disaster recovery

Improves virtual machine performance

Decreases the cost of storage management

23. An administrator has been tasked with creating a real-time view of key performance indicators for their VMware Cloud Foundation private cloud and an automated monthly report that shows the capacity consumed by each development team who use the environment.

Which VCF component should the administrator configure to complete their objectives?

VMware Aria Operations for Networks

VMware Aria Operations for Applications

VMware Aria Operations for Logs

VMware Aria Operations

24. What is the correct sequence of steps when planning the deployment of a VMware Cloud Foundation SDDC?

A) Validate the prerequisites for the deployment

B) Deploy the VMware Cloud Builder appliance

C) Deploy and configure the management domain

D) Validate the successful deployment of the VMware Cloud Foundation SDDC

B, A, D, C

A, B, C, D

A, B, D, C

B, C, A, D

25. DRAG DROP

Match each troubleshooting task with its relevant procedure or tool.

26. What must be validated before deploying a VMware Cloud Foundation management domain?

Available network bandwidth between ESXi hosts

The available version of VMware Aria Suite

Sufficient resources in the cloud for deployment

The prerequisites such as DNS, NTP, service accounts, and storage for the domain

27. When planning a workload migration to VMware Cloud Foundation, what is a crucial factor to evaluate before proceeding?

Virtual machines should not exceed 8 vCPUs for migration

The on-premises data center and VMware Cloud Foundation should share the same cloud provider

The migration should ensure that network connectivity is available to all necessary resources

Storage should always be migrated first before the virtual machines

28. DRAG DROP

Match each vSphere HA host state issue with its troubleshooting step.

29. An administrator has deployed a new VMware Cloud Builder appliance using the downloaded OVF file. While attempting to use the VMware Cloud Builder interface, the administrator discovers that no connection can be established to the appliance.

Which three configuration errors may have occurred? (Choose three.)

VLAN misconfiguration.

Incorrect DNS settings or inaccessible DNS servers.

Incorrect NTP settings or inaccessible NTP servers.

Incorrect Static IP configuration.

BGP routing misconfiguration.

Incorrect Dynamic IP configuration.

30. An administrator needs to secure an ESXi host in their environment by enabling lockdown mode.

What two steps should be taken to secure the ESXi host using lockdown mode? (Choose two.)

Navigate to the host's settings in the vSphere Client.

Enable "Strict Lockdown Mode" to restrict all direct access to the host.

Reboot the host to apply the lockdown settings.

Add the host to a dedicated security group in Active Directory.

Disable SSH and the ESXi Shell.

Page 4 of 7

31. What role does vSphere Lifecycle Manager play in managing VMware Cloud Foundation deployments?

Deploys additional NSX edge clusters

Automates the configuration of storage and network resources

Handles the lifecycle management of VMware Cloud Foundation components

Manages workload distribution between cloud providers

32. In a VMware Cloud Foundation deployment, which component must be configured first before starting the installation of VMware Aria Suite Lifecycle?

NSX Manager

vCenter Server

vSAN

vSphere

33. When configuring NSX Edge for a VMware Cloud Foundation deployment, which two components must be configured?

Uplink interfaces for NSX Edge

BGP routing settings

ESXi hosts

vSAN datastores

34. After deploying the VMware Cloud Foundation management domain, an administrator needs to configure backup for the components within the domain.

Which two steps are involved in configuring the backup of VMware Cloud Foundation management components? (Choose two.)

Configure an external SFTP backup repository on the SDDC Manager.

Manually export the NSX configuration to the SDDC Manager.

Enable the vCenter Server snapshot manager on the SDDC Manager.

Install a third-party backup solution on each ESXi host.

Create a backup schedule on the SDDC manager to automate taking regular backups.

35. Which command verifies the successful installation of the Tanzu CLI tools on a developer workstation?

vsphere -v

tanzu version

vicli version

vcli --check

36. An administrator's passwords for their NSX 'root', 'admin', and 'audit' accounts in the Cloud Foundation management domain expired. The administrator logged into the NSX Manager console and changed the passwords for all three accounts. The passwords are now showing a status of "Disconnected" in the SDDC Manager UI.

In order to correct this issue, how can SDDC Manager be updated with the new passwords?

In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Rotate.

In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Sync.

In SDDC Manager, navigate to Password Management and select the account with the password with a "Disconnected" status, click the vertical ellipsis (three dots), and click Remediate.

37. An organization requires granular control over vCenter permissions and they need to assign roles to specific user groups.

Which three steps must be followed to assign roles to users or groups in vCenter? (Choose three.)

Manually add each user to the role.

Navigate to the vSphere Client and choose the object for which they want to assign permissions.

Choose 'Add Permission' from the context menu.

Choose the role to assign from the predefined list of roles.

Assign the role to a user or group from the identity source.

38. While deploying the first VI workload domain in a VMware Cloud Foundation solution, which two steps will always be performed by SDDC Manager? (Choose two.)

Confiqure vSAN for the VI workload domain's storaqe needs.

Deploy and confiqure a newvCenter Server instance for the VI workload domain.

Deploy an NSX Edqe cluster and confiqure BGP routinq on the TO Gateway.

Connect a newvCenter Server instance to the Application Virtual Network.

Deploy a new NSX Manaqer instance for the VI workload domain.

39. When planning a VMware Cloud Foundation deployment, what is a key factor to consider for designing a solution optimized for capacity?

Use as many hosts as possible in a single cluster

Ensure storage resources are allocated based on workload demand

Prioritize high-availability options over workload isolation

Limit the number of virtual machines per host for better performance

40. What is the first task in Day 2 operations when upgrading VMware Cloud Foundation components?

Perform an update pre-check for all workloads

Download the update bundles

Perform a backup of all VMware Cloud Foundation components

Upgrade the SDDC Manager

Page 5 of 7

41. An administrator needs to configure Network IO Control (NIOC) on a Virtual Distributed Switch (VDS) to prioritize storage traffic over other types of traffic.

Which two steps should be followed? (Choose two.)

Disable all other traffic types to ensure storage traffic gets full bandwidth.

Navigate to the VDS settings in the vSphere Client and enable NIO

Migrate all VM traffic to a standard switch.

Create a new port group specifically for storage traffic.

Assign shares and limits to the new port group to prioritize the storage traffic.

42. Which two steps are necessary before deploying VMware Cloud Foundation management domain using VMware Cloud Builder?

Ensure VMware Aria Suite Lifecycle is set up

Validate vCenter Server, vSAN, and NSX availability

Prepare ESXi hosts with sufficient resources

Confirm NSX Edge Cluster configuration

43. Which feature of VMware Lifecycle Manager allows an administrator to manage the lifecycle of ESXi hosts by applying a consistent image across the hosts in a cluster? (Choose three.)

Configure a Key Management Server (KMS) and add it to vCenter

Create an encryption policy in vCenter.

Enable SSH on the ESXi hosts to manage encryption keys.

Enable the encryption feature on the ESXi hosts.

Apply the encryption policy to the existing VMs.

44. Which two actions are required to scale a VMware Cloud Foundation deployment by adding a new host? (Choose two)

Configure the storage policy for the new host

Ensure that the host has access to the same vSAN datastore

Add the host to the existing VMware Cloud Foundation domain

Update the SDDC Manager with the host's configuration

45. Which of the following prerequisites are required to deploy VMware Aria Suite Lifecycle in VMware Cloud Foundation? (Select two)

vCenter Server must be configured for multi-tenancy

Network and storage resources must be allocated

vSphere IaaS control plane must be enabled

Backup and recovery configurations must be set up

46. Which VMware vSphere feature provides the ability to define and apply datastore capabilities to ensure virtual machines meet specific performance and availability requirements?

Storage Policy Components

Storage Policies

Performance Service

Host Profiles

47. An organization wants to centralize its VM templates, ISO images, and scripts to streamline deployment processes across multiple sites using Content Libraries.

Which three steps are required to create a new Content Library? (Choose three.)

Configure the library to automatically sync with the vSphere Update Manaqer.

Choose "Create a new library" and enter a name and description for the library.

Select "Local content library" and choose the datastore to store the library contents.

Navigate to the Content Libraries section in the vSphere Client.

Add the necessary permissions to allow users to upload content to the library.

48. Arrange the steps in the correct sequence for deploying a VMware Cloud Foundation management domain using SDDC Manager.

A) Deploy the VMware Cloud Builder appliance

B) Validate prerequisites for VMware Cloud Foundation deployment

C) Deploy and configure vCenter, NSX, vSAN, and SDDC Manager

D) Prepare ESXi hosts for VMware Cloud Foundation deployment

B, A, D, C

A, B, C, D

C, D, B, A

D, A, C, B

49. Which two SDDC Manager operations can be executed on an NSX Edge cluster after it has been deployed? (Choose two.)

Redeploy

|Sync

Expand

Delete

Shrink

50. VMware Cloud Foundation APIs

A) Provides network virtualization and security features

B) Automates the deployment and lifecycle management of components

C) Manages storage resources and policies

D) Allows integration and communication with third-party solutions

1 - A: NSX provides network virtualization and security features. 2 - C: vSAN manages storage resources and policies. 3 - B: SDDC Manager automates the deployment and lifecycle management of components. 4 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions.

1 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions. 2 - B: SDDC Manager automates the deployment and lifecycle management of components. 3 - A: NSX provides network virtualization and security features. 4 - C: vSAN manages storage resources and policies.

1 - C: vSAN manages storage resources and policies. 2 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions. 3 - A: NSX provides network virtualization and security features. 4 - B: SDDC Manager automates the deployment and lifecycle management of components.

1 - B: SDDC Manager automates the deployment and lifecycle management of components. 2 - C: vSAN manages storage resources and policies. 3 - A: NSX provides network virtualization and security features. 4 - D: VMware Cloud Foundation APIs allow for integration with third-party solutions.

Page 6 of 7

51. A. The FQDN of the Aria Suite Lifecycle appliance

B. The FQDN of the Aria Suite Lifecycle cluster

C. A free IP address on the VMware NSX Tier 0

D. The password for the root account

E. A free IP Address within the cross-region virtual network segment

F. The password for the vcfadmin@local account

G. The password for the admin@local account

52. An administrator needs to perform lifecycle management for their VMware Cloud Foundation components, including upgrading the SDDC Manager.

Which three steps should be followed to successfully upgrade VMware Cloud Foundation? (Choose three.)

Backup all VMware Cloud Foundation components before starting the upgrade.

Disable DRS and HA on all clusters before initiating the upgrade.

Manually download the update bundles with a secure browser from the VMware website.

Perform a pre-check to ensure that all components are compatible with the new version.

Use the SDDC Manager Ul to initiate the upgrade process.

53. An administrator needs to ensure that their VMware Cloud Foundation-based private cloud solution can support multi-tenancy for different departments within their organization.

What two configurations and components are necessary to achieve this? (Choose two.)

Configure vSAN storage policies for each department.

Use vSphere Resource Pools to allocate resources to different departments.

Deploy Aria Automation to enable self-service provisioning for tenants.

Use NSX to create isolated network segments for each tenant.

54. When configuring vSAN in a VMware Cloud Foundation environment, which of the following tasks should be performed?

Create vSAN policies for performance and availability

Install vSAN hardware drivers on each host

Configure storage networking between all nodes

Enable data deduplication and compression

55. Which component is responsible for creating and managing virtual machines in VMware Cloud Foundation?

vSphere

vCenter

NSX-T

vRealize Operations

56. When troubleshooting vSAN performance in VMware Cloud Foundation, which two metrics are important to monitor? (Select two)

Latency

CPU usage

Disk health

Memory consumption

57. When performing Day 2 operations in VMware Cloud Foundation, which of the following is the correct procedure for upgrading VMware Cloud Foundation components?

Use the VMware Aria Suite Lifecycle to apply upgrades

Use SDDC Manager to download and apply update bundles

Manually upgrade components through vCenter Server

Use VMware vSphere Update Manager for upgrades

58. What is the impact of consolidating snapshots on a virtual machine?

It reverts the VM to the state of the first snapshot taken.

It disconnects the VM from the network temporarily.

It temporarily increases the available disk space consumption on the datastore while merging data.

It changes the VM’s hardware compatibility settings.

59. What are the correct steps for scaling a VMware Cloud Foundation deployment? Arrange the steps in the correct order.

A. Add hosts to an existing cluster.

B. Scale the management domain.

C. Deploy additional workload domains.

D. Validate prerequisites for scaling.

A. D, A, B, C

B. B, A, D, C

C. A, C, B, D

D. C, D, B, A

60. An administrator needs to create a custom role in vCenter Server that is part of VMware Cloud Foundation environment to grant specific privileges to a group of users.

Which two actions should be taken to create this custom role? (Choose two.)

Choose the privileges required for the custom role.

Navigate to the Roles section in the vSphere Client.

Apply the custom role to the root of the vCenter Server inventor/.

Assign permissions to the custom role before adding privileges.

Clone an existing role in SDDC Manager to create the custom role.

Page 7 of 7

61. An administrator has been tasked with expanding an existing VMware Cloud Foundation environment by adding a new workload domain. The environment currently has one management domain and one VI workload domain.

What options are available to the administrator for deploying NSX in the second VI workload domain?

The new workload domain can have its own dedicated NSX Fabric or it can join the existing NSX Fabric configured in the existing VI domain.

The new workload domain can have a dedicated NSX Fabric or it can join the existing NSX Fabric configured in either the management domain or existing VI domain.

The new workload domain can have its own dedicated NSX Fabric or it can join the existing NSX Fabric configured in the management domain.

The new workload domain must have a dedicated NSX Fabric.

62. Match the VMware Cloud Foundation component with its main function.

Component:

A) vSphere

B) vSAN

C) NSX

D) SDDC Manager

Function:

1) Manages virtual networking and security

2) Provides software-defined storage for VMs

3) Manages virtual infrastructure resources

4) Manages deployment and lifecycle of VMware Cloud Foundation components

A) vSphere -> 3) Manages virtual infrastructure resources B) vSAN -> 4) Manages deployment and lifecycle of VMware Cloud Foundation components C) NSX -> 2) Provides software-defined storage for VMs D) SDDC Manager -> 1) Manages virtual networking and security

A) vSphere -> 3) Manages virtual infrastructure resources B) vSAN -> 2) Provides software-defined storage for VMs C) NSX -> 1) Manages virtual networking and security D) SDDC Manager -> 4) Manages deployment and lifecycle of VMware Cloud Foundation components

A) vSphere -> 1) Manages virtual networking and security B) vSAN -> 3) Manages virtual infrastructure resources C) NSX -> 2) Provides software-defined storage for VMs D) SDDC Manager -> 4) Manages deployment and lifecycle of VMware Cloud Foundation components

A) vSphere -> 3) Manages virtual infrastructure resources B) vSAN -> 4) Manages deployment and lifecycle of VMware Cloud Foundation components C) NSX -> 1) Manages virtual networking and security D) SDDC Manager -> 2) Provides software-defined storage for VMs

63. Which components are involved in deploying a VMware Cloud Foundation management domain? (Select two)

vSphere vCenter

vRealize Automation

vSAN storage

NSX-T

64. What is the primary purpose of configuring VM storage policies in a VMware vSphere environment?

To manage network traffic between VMs.

To enforce specific storage requirements such as performance, availability, and redundancy.

To configure CPU and memory reservations for VMs.

To automate the backup of virtual machines.

65. What is the primary tool used for troubleshooting vSphere IaaS Control Plane (formerly vSphere with Tanzu) issues in VMware Cloud Foundation?

vRealize Operations Manager

vSphere CLI

vSphere Client

VMware Tanzu CLI

66. When troubleshooting vSAN connectivity issues in VMware Cloud Foundation, which of the following actions should be taken?

Check the status of the vSAN datastore

Reboot the ESXi hosts in the vSAN cluster

Reset the vSAN health alarms

Disable network IO control for the vSAN datastore

67. In VMware Cloud Foundation, what should you configure before enabling vSphere IaaS control plane?

vSAN storage policies

NSX-T overlay network

Overlay network and Ingress/Egress networks

vRealize Operations cloud instance

68. When deploying a VMware Aria Suite using SDDC Manager, what is the prerequisite?

VMware NSX must be fully configured before deployment

Application Virtual Networks (AVNs) must be configured

vSAN storage must be configured for resource allocation

A minimum of 3 ESXi hosts must be available for deployment

69. Which feature of VMware Data Services Manager enhances database security and compliance?

Automated workload migration

Database-Level Authentication

Network traffic optimization

Storage replication

TAGS:

2V0-11.24, 2V0-11.24 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get 2V0-11.24 Dumps Full Version

Q&As: 236
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Pass 2V0-11.24 Exam to Get Vmware Certification

Related

Posts

Pass 2V0-13.24 Exam to Get Vmware Certification

2V0-91.22 Online Dumps Boost Your Career

2V0-72.22 Dumps Guarantee You Pass 2V0-72.22 Exam Easily

2V0-41.24 Dumps Help You Study Objectives

About Us

EMAIL

Services

Opening Hours