Pass D-PEMX-DY-23 Exam to Get DELL EMC Certification

Category:

Comments:

0 Comments

Post Date:

March 15, 2024

The D-PEMX-DY-23 exam is hot, and passing it requires a deep understanding of DELL EMC solutions. Practicing with DELL EMC D-PEMX-DY-23 dumps questions can help you reinforce your knowledge and increase your chances of passing the exam. D-PEMX-DY-23 dumps are available to help you prepare for the D-PEMX-DY-23 exam. Using D-PEMX-DY-23 exam dumps questions is one effective way to supplement your study plan and increase your chances of success on exam day. Test free Dell Server D-PEMX-DY-23 exam dumps below.

Page 1 of 5

1. What is the port configuration of an MX5108n switch?

16 x internal 25GbE ports 4 x 40GbE QSFP+ ports 2 x 100GbE QSFP28 ports 1 x 10GbE RJ45 Base-T port

8 x internal 25GbE ports 1 x 40GbE QSFP+ port 2 x 100GbE QSFP28 ports 4 x 10GbE RJ45 Base-T ports

8 x internal 25GbE ports 2 x 40GbE QSFP+ ports 1 x 100GbE QSFP28 port 4 x 10GbE RJ45 Base-T ports

16 x internal 25GbE ports 1 x 40GbE QSFP+ port 2 x 100GbE QSFP28 ports 4 x 10GbE RJ45 Base-T ports

2. What are the required components for a PowerEdge MX7000 Minimum to POST configuration?

Two power supply units One compute sled One input output module Two management modules Five front fans and four rear fans

Two power supply units One compute sled One input output module One management module Four front and five rear fans

One power supply unit One compute sled One input output module One management module Two front fans and two rear fans

3. The MDB chassis tub assembly vertical distribution board provides connectivity to which chassis components?

Five near fan modules

Four cooling fans and four fabric I/O modules

Power supplies, compute sleds, Management Modules, and two fabric I/O modules

Pear power supplies, compute sleds, Management Modules, and all fabric I/O modules

4. A PowerEdge MX7000 chassis was ordered with a factory-generated password. The customer needs to reset the PowerEdge MX7000 chassis configuration using the RACADM racresetcfg command.

What login credentials will the customer need to use to log on after running the command?

root / calvin

admin / password found on luggage tag

root / password found on luggage tag

admin / calvin

5. A system administrator must assign six of the MX5016s drives to a single MX750c compute node.

Which assignment mode accomplishes this task?

Multiple-assigned storage configuration

Drive-assigned storage configuration

PERC-assigned storage configuration

Enclosure-assigned storage configuration

6. A technician has replaced an MX chassis tub. They complete the tub installation and power on the chassis. They notice that the KVM is no longer functional.

What should the technician do after confirming the KVM feature is still enabled in OME-M?

Ensure all cables connecting the tub to the left ear control panel are connected properly

Ensure all power supplies are connected and powered-on

Ensure all cables connecting the tub to the right ear control panel are connected properly

Ensure all installed Management Modules are connected to the network

7. A system administrator wants to disable Lockdown Mode.

Which interface should be used?

iSM Interface

iDRAC UI

TPM Interface

BIOS

8. After a main board replacement, the easy restore process was not successful. A system administrator is not able to launch the Virtual Console.

What is the cause of this issue?

ActiveX is not installed.

Java is not installed.

Enterprise license is not installed.

KVM is not present.

9. What is the benefit of C22 power inlet connectors on the MX7000 chassis?

Meet higher power requirements

C22 connectors are now standard on PowerEdge

Allow for higher exhaust temperatures

Enable linking together power supplies

10. A technician replaces a failed Management Module in an MX7000 chassis group. After the technician leaves the site, the administrator reports that the lead chassis is no longer able to communicate with its members.

How can OME-M be used to confirm the cabling configuration?

View the health status of the lead Chassis Management Module

View the health status of the lead Chassis Management ports

View the I/O module topology map from the lead chassis

View the topology map from the Group Lead

Page 2 of 5

11. An MX7000 administrator has been tasked to perform the initial configuration of a new MX platform. The MX700 has seven MX740c, one MX5016s, two Management Modules (MMs), an LED-Only control panel, two MX9116n in Fabric A, two MX5108n in Fabric B, and two MX5000s in Fabric C.

What is a valid method to perform the initial MX platform configuration?

Use a serial DB9 / DB cable

Use KVM and racadm setniccfg command from MM configuration menu

Use Ethernet front panel port default DHCP address

Use QuickSync 2

12. What is the port configuration of the MX9116n FSE?

32 internal 25 GbE server facing ports 12 QSFP28-DD ports 2 100 GbE QSFP28 uplink ports 2 100 GbE QSFP28 unified ports

32 internal 25 GbE server facing ports 10 QSFP28-DD ports 4 100 GbE QSFP28 uplink ports 2 100 GbE QSFP28 unified ports

16 internal 25 GbE server facing ports 10 QSFP28-DD ports 4 100 GbE QSFP28 uplink ports 2 100 GbE QSFP28 unified ports

16 internal 25 GbE server facing ports 12 QSFP28-DD ports 2 100 GbE QSFP28 uplink ports 2 100 GbE QSFP28 unified ports

13. What are the correct CLI commands to configure the management IP Address on either the MX9116n or the MX5108n switches running SmartFabric OS10?

interface vlan 4020 no ip address ip address 192.168.1.10/24 no shutdown exit management route 0.0.0.0/0 192.168.1.1

interface mgmt 1/1/1 no ip address ip address 192.168.10.10/24 no shutdown exit management route 0.0.0.0/0 192.168.10.1

interface vlan 4020 no ip address ip address 192.168.1.10/24 no shutdown exit interface mgmt 1/1/1 no ip address ip address 192.168.1.10/24 no shutdown exit management route 0.0.0.0/0 192.168.1.1

interface vlan 4020 no ip address ip address 192.168.10.10/24 no shutdown exit interface mgmt 1/1/1 no shutdown exit management route 0.0.0.0/0 192.168.10.1

14. To which two components do the front fans of the MX7000 provide cooling?

(Select 2)

MMs

PSUs

IOMs

Servers

15. A PowerEdge MX7000 administrator is tasked to perform a chassis update using a catalog.

Which source options are used to create the catalog?

Newest validated stacks of chassis firmware on dell.com Latest component firmware versions on dell.com Network path

Latest component firmware versions on dell.com Dell Update Package Network path

Newest validated stacks of chassis firmware on dell.com Dell Update Package Local Directory path

Newest validated stacks of chassis firmware on dell.com Latest component firmware versions on dell.com Local Directory path

16. Refer to the exhibit.

What is shown?

MX5000s

MX5108n

MX5016s

MXG610s

17. What compute sled model best supports the following requirements?

4 Node Database Cluster Heavy transactional workload 16 Processors

24 TB of DDR4 Memory

40 TB of Disk Space Maximum of 200,000 IOPS

4 x MX840C 16 Processors 24 TB of DDR4 Memory 40 TB of Disk Space based on SAS SSD Drives

4 x MX840C 16 Processors 24 TB of DDR4 Memory 40 TB of Disk Space based on NVMe Drives

8 x MX750C 16 Processors 16 TB of DDR4 Memory 45 TB of Disk Space based on NVMe Drives

8 x MX740C 16 Processors 16 TB of DDR4 Memory 50 TB of Disk Space based on SAS SSD Drives

18. What can be used as the firmware update source for OME-M within an MX chassis?

Server Update Utility Baseline from a Catalog

Server Update Utility System Live Image (SLI)

Dell Update package System Live Image (SLI)

Dell Update Package Baseline from a Catalog

19. A network administrator must implement a 100 GbE network in their MX7000 chassis group.

Which two components satisfy this requirement?

(Select 2)

Z9432F-ON

MX7116n

Z9332F-ON

MX9116n

MX8116n

20. What is the maximum number of mezzanine cards that can be installed in an MX840c?

Page 3 of 5

21. What are the components of the control panel of a PowerEdge MX750c sled?

Power button USB 3.0 port micro DisplayPort iDRAC direct status LED

Power button USB 2.0 port micro DisplayPort iDRAC direct status LED

Power button USB 3.0 port iDRAC micro port iDRAC direct status LED

Power button USB 2.0 port iDRAC micro port iDRAC direct status LED

22. A system administrator must carry out a SupportAssist log collection on an MX750c sled using iDRAC that includes operating system logs.

What is required?

Enterprise License

iDRAC LOM NIC

OpenManage System Administrator

iDRAC Service Module Driver installed

23. Which two actions are possible using the Chassis Deployment Wizard?

(Select 2)

The LCD pin can be configured.

The administrator can use an existing chassis profile to configure the chassis.

The firmware catalog can be configured using the FTP protocol.

The network I/O Module password can be configured.

24. In addition to one compute sled, one management module, and one IOM, what is the minimum required HW configuration on the PowerEdge MX7000 to POST?

1 power supply unit 2 front cooling fans 3 rear cooling fans

1 power supply unit 1 front cooling fan 1 rear cooling fan

2 power supply units 4 front cooling fans 5 rear cooling fans

3 power supply units 4 front cooling fans 5 rear cooling fans

25. Refer to the exhibit.

How many internal server-facing ports are available on this I/O module for the MX7000 chassis?

26. What is the maximum supported drive configuration on a PowerEdge MX840c compute sled?

8 x 2.5” drives

2 x 2.5” drives and 4 x 3.5” drives

4 x 2.5” drives and 2 x 3.5” drives

6 x 3.5” drives

27. An administrator is asked to install and power on a new MX740c sled in a PowerEdge MX7000 chassis. The administrator inserts the sled and presses the power button. The power button LED is pulsating green. After a short time, the power button turns to solid green and the server turns on.

What operation was in progress when the power button was pulsating green?

iDRAC was booting

Management Module was updating its component inventory

IOM was booting

Lifecycle Controller was taking firmware inventory

28. Which is an invalid option for the PowerEdge MX7000 control panel?

LED with QuickSync 2

LCD with QuickSync 2

LED only

LCD only

29. What is the connection protocol between FReD and MM?

HDMI

Ethernet

I2C

30. What type of video connector is available for KVM connectivity on the PowerEdge MX7000 chassis?

Mini-DVI

DisplayPort

VGA

Mini DisplayPort

Page 4 of 5

31. Why is the backup lead configuration important in an MCM Group?

The configuration allows sharing of the lead chassis IOMs and Management Module databases.

The backup lead chassis facilitates management of systems when the existing lead chassis fails.

The backup chassis is promoted automatically if the lead chassis fails.

This configuration allows configuration changes from the backup chassis.

32. A systems administrator must extract log files from an MX7000. The logs cannot be saved locally and must only be stored on a secure file server.

Which share protocols can they use to save the logs?

NFS and HTTPS

CIFS and NFS

HTTPS and SFTP

HTTPS and SCP

SFTP and CIFS

33. What is a benefit of SmartFabric Services Mode?

Topology validation and self-healing

Load balancing for management layers

Load balancing for application layers

Automatic detection of packet collisions

34. What type of power cord connects to the PSU side of a PowerEdge MX7000?

C13

C15

C21

35. Which two main components comprise a Scalable Fabric?

MX9116n and the MX5108n

MX9116n and the MX7116n

MX9116n and the 25GbE PTM

MX7116n and the MX5108n

36. A data center team is working on a solution to monitor and manage data center devices from anywhere.

Which feature can be configured to perform these tasks?

OIDC

OME-M

QAT

OMM

37. Which MX7000 chassis components does the Vertical Power Distribution Board power?

IOMs Compute sleds Rear fans

Compute sleds Right and Left Control Panels Rear fans

IOMs Rear fans Front fans

38. Which I/O module is supported for Fabric B?

MX5016s

MSG610s

MX5000s

MX5108n

39. When a SAS IOM is power cycled, how much time does it take for the storage-IOM to display mapping information?

300 seconds

400 seconds

500 seconds

600 seconds

40. Which two-socket PowerEdge sled can support up to eight E3.s NVMe Gen 5 SSD drives?

MX740c

MX750c

MX760c

MX840c

Page 5 of 5

41. 1.What is a valid option when resetting iDRAC to factory defaults?

Preserve user and network settings

Preserve network and storage settings

Preserve identity and network settings

Preserve storage and user settings

TAGS:

D-PEMX-DY-23, D-PEMX-DY-23 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-PEMX-DY-23 Dumps Full Version

Q&As: 135
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Pass D-PEMX-DY-23 Exam to Get DELL EMC Certification

Related

Posts

Advance Your Career by Using Online D-PSC-MN-01 Dumps

D-NWR-DY-01 Exam Dumps – Reliable Way to Pass and Get Certified

DELL EMC D-VXR-OE-23 Exam Questions Simulate Actual D-VXR-OE-23 Exam

Prepare D-SNC-DY-00 Exam with Using D-SNC-DY-00 Dump Questions

About Us

EMAIL

Services

Opening Hours