Prepare D-PDD-DY-23 Exam with Using D-PDD-DY-23 Dump Questions

1. What are some possible network bottlenecks for a PowerProtect DD?

2. With DSP enabled on a PowerProtect DD appliance, which functions are performed on the backup host?

3. Which component executes the read/write requests in a backup environment consisting of a PowerProtect DD appliance and IBM Spectrum Protect?

4. A PowerProtect DD system is configured to with VTL. The backup application requires a minimum tape capacity of 1.5 TiB.

What is the minimum tape type to support this requirement?

5. An administrator is scaling Cloud Tier for a DD9900 by adding a second cloud unit.

What is the required amount of metadata storage (TB)?

6. An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.

What is the most likely cause of this behavior?

7. Which data movement system setting is available in PowerProtect DD File System Settings?

8. Refer to the exhibit:





If SAS HBA slot 1 port B is connected to Shelf 01 port BH, to which shelf and port should SAS HBA slot 2 port A be connected?

9. A backup administrator is using retention lock.

What happens when the retention period expires?

10. A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained.

Which PowerProtect DD systems meet the customer’s requirement?

11. An IBM Spectrum Protect administrator is configuring a device class with PowerProtect DD.

Following best practices, what is the recommended device type and mount limit?

12. A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.

What is causing these drives to be inaccessible?

13. A customer needs a backup system to protect 100 TB of mission-critical data.

What should be used to back up the system?

14. What is the order of steps to configure DD Boost on a PowerProtect DD appliance?

15. The finance department requires unused PDFs older than 90 days to be tiered into Azure Blob Storage.

Which data movement policy is used to archive the files?

16. An administrator notices that several disks on a shelf show as unknown.

What should be done to resolve this issue?

17. A customer's Power Protect DD system is full. No data can be written or deleted from the system

Which two actions can the customer take to make capacity available on the system? (Select 2)

18. A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 4 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 200 GB. The initial backup requires 800 GB with a 10 percent increase in the data each day.

Incremental backups are 400 GB. After data reduction, each incremental backup is 40 GB.

What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?

19. What are the settings for serial communication when connecting to a PowerProtect DD appliance?

20. A system administrator wants to configure the log level when configuring the protocol CIFS.

Which log level is set by default?

21. Which command displays the RAID group information for the active tier of each shelf?

22. Which feature helps to ensure that data immutability is maintained on a PowerProtect DD system?

23. A PowerProtect administrator wants to enable encryption on one of two existing cloud units.

Which statement is true regarding the encryption?

24. What is a key differentiator of Dell PowerProtect DD systems in terms of data handling during the write process?

25. SIMULATION

Task 5

Use the simulator to configure a new MTree with a path of /data/col1/oracle. The MTree size must not be allowed to exceed 200 TiB.

When you have finished, continue to the next question.

26. Which backup application can back up data to a PowerProtect DD system using DD Boost over FC?

27. What is enabled by the following command? authorization policy set security-officer enabled

28. An administrator is configuring a Google Cloud Provider cloud unit on their DD9900.

Which certificate must be imported before adding the cloud unit?

29. A customer has stored the data that is in the cloud using PowerProtect DD. For security reasons, encryption will be applied to the data.

What is the required action to achieve the customer's goal?

30. What is the Backup Data packet flow from the Amavar Client to the PowerProtect DD appliance?

31. A customer needs to configure a pair of PowerProtect DD6900 systems to use high availability.

Which expansion shelf is required?

32. A customer is going to manage access to PowerProtect DD and wants to know which authentication methods are available in DD System Manager.

Use the simulator to explore the system.

Which authentication method is supported? Note: It is necessary to close (x) the simulator window before you can select a response to this question.

33. What system role is required to create the second security officer for a PowerProtect DD?

34. A customer needs an upgrade on their DD6900 to use HA.

Which expansion shelf is required?

35. In a PowerProtect DD backup environment, what is used for writing to and reading from the backup targets in Veritas Backup Exec?

36. What is the data reduction ratio that can be predicted when applying best practices for deduplicating data on a PowerProtect DD?

37. SIMULATION

Task4

An administrator needs to create a new non-admin user and a storage unit for their Oracle 'abc123' department.

Use the simulator to:

- Create a new user: 'DDBoostOracle' with password: Password123, management role: none, with Password Aging Policy: Minimum Days: 0, Maximum Days: 180, Warn Days: 15 days

- Assign the user to the ddboost users.

- Create a new storage unit called: SU_Oracle and assign new user to the storage unit.

38. A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.

The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.

What is the weekly burn rate (GB) after four daily incremental backups and one weekly backup?

39. A systems administrator wants to change encryption.

Which user role is needed to log in, and what command must be run to enable the security policy?

40. What type of replication does DDVE support?

41. SIMULATION

Task 7

An engineer is implementing a new PowerProtect DD system. Retention Lock Compliance Edition is required.

Use the simulator to ensure that the account asterix1 with the password password2 is in place and the correct role assigned. Set the password to be required to change after 180 days.

When you have finished, continue to the next question.

42. What is a use case of BoostFS

43. A backup administrator is reviewing the Active Tier of a DD6900 in DDSM with a customer. The customer asks how the Local-Comp Factor value is calculated.

Which is the correct response?

44. Which protocols are supported by PowerProtect DD appliances for data movement to the Cloud Tier?

45. DRAG DROP

Which is the correct implementation order for a VTL environment?

46. What is the maximum number of CIFS shares that the PowerProtect DD system supports?

47. DRAG DROP

What is the correct order of operations for the Data Invulnerability Architecture (DIA) elements?

48. A PowerProtect DD administrator must optimize TCP/IP performance on AIX host, what setting must be used for each NIC interface?

49. A backup administrator notices that the backups and replication are exceeding their backup window. The system is also utilizing the DD Boost protocol.

They notice the system is experiencing slow performance and want to monitor performance in real-time.

Which command best accomplishes this task?

50. What are valid states for the DD VTL process?

51. Which command is used to check if NFS is enabled?

52. A PowerProtect DD with two ES40 expansion shelves was just installed. An error message is received.

What is the most likely reason?

53. What is the maximum number of PowerProtect DD systems that can be used in a Smart Scale data center?

54. Which deduplication steps are offloaded when DSP is used?

55. What is the maximum capacity for an on-premises DDVE with no cloud storage?

56. Which backup applications create their own storage units when they are configured to use a PowerProtect DD appliance as a backup target?

57. What is a use case of BoostFS?

58. After adding expansion shelves, an administrator verifies the state of the new disks with the command disk show state is unknown.

Which command will make these disks available?

59. If ES40 SAS shelves are on the same chain as a DS60, what is the maximum number of possible shelves on that chain?