Study Online D-NWG-DS-00 Exam Dumps to Pass

D-NWG-DS-00 dumps questions can help you identify areas where you need to focus your studies. As you answer questions, you will be able to see which topics you are comfortable with and which ones you need to spend more time studying. DELL EMC D-NWG-DS-00 dumps questions provide realistic practice for the certification exam. D-NWG-DS-00 dumps are designed to simulate the actual exam environment, and they will give you a chance to practice answering questions under time pressure. Study free DELL EMC D-NWG-DS-00 online dumps below.

Page 1 of 4

1. Which component of network documentation is essential to ensure the design meets security policies?

Network Topology Diagram

VLAN Assignment Template

Security Policy Checklist

Post-Deployment Verification

 Loading...

2. What is a key reason for using templates during the network design documentation process?

To automate network configuration

To reduce the time required for documenting repetitive tasks

To replace the need for network monitoring tools

To dynamically assign IP addresses

 Loading...

3. Which two buttons are available for Order List inside Financial Force?

Order Products Shipment Status

Order Services

Order Products All

Order Products Services

 Loading...

4. Which tasks are typically included in the scoping phase of a network design project?

Identifying business objectives

Installing network devices

Estimating project costs

Defining deliverables

 Loading...

5. What is the primary role of deployment support in a network design project?

To provide ongoing configuration updates

To assist with the installation and setup of network devices

To generate network traffic reports

To design network security policies

 Loading...

6. Which of the following is a key element of Post-Deployment Verification?

Configuring VLANs

Verifying that the network's performance matches the design specifications

Assigning IP addresses

Installing network cables

 Loading...

7. A project design requires documenting FCoE for an MX7000 chassis.

What section should be used for defining the FCoE feature enablement on server NIC card?

Chassis Sleds

Server Profiles

NPAR

SmartFabric

 Loading...

8. What is the Financial Force tool used for?

Sales Planning

Architect Designing

Order Tracking

Project Management

 Loading...

9. Which tasks are performed during the scoping phase to align the network design with business requirements?

Implementing network security policies

Identifying project requirements and constraints

Scheduling network monitoring solutions

Installing routers and switches

 Loading...

10. What is a characteristic of DAC?

DAC does not provide visible serial numbers in the CL

The serial numbers should be identical on both ends of the network

The transmitting side and the receiving side have different serial numbers.

 Loading...

Page 2 of 4

11. What three actions is a Design Architect responsible for during the Remote Connectivity planning?

Designing a dedicated management network for remote connectivity

Ensuring the customer implements Secure Connect Gateway

Confirming if Dell should configure switches for remote connectivity

Collecting name and IP address of the configured gateways

 Loading...

12. Which of the following are critical in planning for network segmentation using Layer 2 technologies?

Subnetting and routing protocols

VLAN segmentation and MAC address management

Fibre Channel zoning and thin provisioning

IP address allocation and subnetting

 Loading...

13. Which of the following are common components of a network design template?

IP addressing scheme

Network topology diagram

VLAN configurations

Software patching schedule

 Loading...

14. Which of the following are key considerations during Layer 3 (L3) network planning?

Routing protocols

IP address allocation

VLAN segmentation

Network topology

 Loading...

15. Which deployment support issue is most likely to occur during the installation of network devices?

Incorrect routing protocols

Mismatched cabling and connectivity issues

IP address conflicts

Software licensing expiration

 Loading...

16. What are two roles of the accounts team on a network project?

The account technical sales representative works with the customer to prepare high-level design.

An inside sales representative prepares high-level network design.

Network sales representative prepares a high-level network design.

The account executive is the leader of the accounts team.

 Loading...

17. An engineer is deploying and configuring an OS10 switch. They tried to resend the license to an internal email from the Digital Licensing and Fulfillment Portal. The subject line in received email shows the product name. There was no license that is attached to the email when the engineer opened the email.

Why was the license not attached to the email that the engineer received?

The license must be bound to a service tag before sending the email.

The license can only be sent to the email address it was registered to.

The license should be sent from the DEE portal instead.

The account team must be involved to quote a new license first.

 Loading...

18. Which document is essential for verifying that all network components meet design specifications after installation?

Post-Deployment Verification Template

Pre-Deployment Checklist

Security Policy Document

VLAN Assignment Sheet

 Loading...

19. What is the main benefit of utilizing the EPS tool in a networking design project?

It provides real-time network traffic analytics

It helps automate the network configuration process

It calculates the power and environmental needs for the network equipment

It schedules daily network backups

 Loading...

20. A customer purchased the following:

- Two Dell PowerSwitch S5248-ON Top of Rack Switches

- One Dell PowerSwitch S3148-ON Management Switch

- One PowerStore 500T with 4x 25 GbE ports

Which three VLANs should be configured on the PowerSwitch S5248-ON Top of Rack switches?

SDNAS

PowerStore Storage

PowerStore Management

Remote Discovery

Internal Discovery

 Loading...

Page 3 of 4

21. What are two methods to configure FCoE?

Perform zoning at the OS10 switch in NPG mode.

Configure the server port using DCB where FCoE connects.

Use FSB mode when it connects to an upstream FCoE Switch.

Use NPG when upstream is an FC switch.

 Loading...

22. Match the following scripting tools with their respective functions in network design:

Tool

FastScript

Unisphere for PowerMax

Solve Online

EPS Tool

Function

A) Automates network configuration tasks

B) Monitors and manages network performance

C) Provides step-by-step guidance for maintenance

D) Estimates power and environmental requirements

FastScript - A Unisphere for PowerMax - B Solve Online - C EPS Tool - D

FastScript - A Unisphere for PowerMax - C Solve Online - B EPS Tool - D

FastScript - A Unisphere for PowerMax - C Solve Online - D EPS Tool - B

FastScript - D Unisphere for PowerMax - B Solve Online - C EPS Tool - A

 Loading...

23. In the context of network replacement planning, which step is critical to ensure minimal downtime?

Installing additional access points

Performing a detailed network assessment prior to replacement

Increasing the number of network devices

Replacing all switches simultaneously

 Loading...

24. What is a critical consideration during storage network planning?

Assigning VLAN IDs

Calculating environmental and power requirements

Ensuring proper Fibre Channel zoning and redundancy

Installing wireless access points

 Loading...

25. What is the main function of the Financial Force tool during the scoping phase of a networking design project?

It manages network performance monitoring

It helps in calculating the financial budget and costs associated with the project

It generates scripts for network deployment

It tracks network traffic analytics

 Loading...

26. What key aspect of the scoping phase helps ensure that the network design meets financial and technical requirements?

Hardware configuration

Cost estimation using Financial Force

Network monitoring tools

Cable management

 Loading...

27. A customer is looking for 25 GbE connectivity to meet the heavy server and storage demands in their virtualized environment.

What port type provides this connectivity?

RJ45

SFP28

SFP+

QSFP+

 Loading...

28. Who should attend the low-complexity network planning calls?

Design Architect, customers, and partners

Account team, Design Architect, and Project Manager

Customers, Project Manager, and partners

Project Manager, Design Architect, and customers

 Loading...

29. In which phase of a network design project would the FastScript tool be most useful?

Physical planning phase

Deployment phase

Documentation phase

Pre-deployment checklist phase

 Loading...

30. A Delivery Engineer experiences hardware issues that they cannot resolve during a network deployment.

Which resource should they contact first for support?

Dell ProSupport

Project Manager

Design Architect

 Loading...

Page 4 of 4

31. In which phase of networking design is the EPS tool most useful?

During the deployment phase when devices are being installed

During the scoping phase when identifying business needs

During the planning phase to estimate environmental and power requirements

During the testing phase to verify performance metrics

 Loading...

32. Which troubleshooting technique is typically used to resolve connectivity issues during network deployment?

Rebooting the network devices

Verifying cable connections and port configurations

Upgrading firmware versions

Disabling VLAN assignments

 Loading...

33. Which of the following steps should be taken when modifying a network design template for a specific project?

Reuse the template from a previous project without changes

Customize the template to reflect the unique requirements of the current project

Use a generic template without customization

Add all devices to a single VLAN

 Loading...

34. Match the following roles in networking design with their corresponding responsibilities:

Role

Network Architect

Network Administrator

Security Engineer

Systems Engineer

Responsibility

A) Designs the entire network structure

B) Manages day-to-day network operations

C) Implements firewalls and intrusion detection

D) Manages servers and network services

Network Architect - A Network Administrator - B Security Engineer - C Systems Engineer - D

Network Architect - C Network Administrator - D Security Engineer - A Systems Engineer - B

Network Architect - D Network Administrator - B Security Engineer - C Systems Engineer - A

Network Architect - A Network Administrator - B Security Engineer - D Systems Engineer - C

 Loading...

35. Verify the MTUs

 Loading...

 Loading...