Valid D-PST-DY-23 Exam Dumps are Your best Choice to Pass

Category:

Comments:

0 Comments

Post Date:

December 18, 2023

If you are looking to take your career in Dell Storage to the next level, the D-PST-DY-23 certification is an excellent option. To prepare for the D-PST-DY-23 exam, you need to have a deep understanding of DELL EMC products and how to configure them. The best way to prepare for the exam is by using D-PST-DY-23 exam dumps questions, which give you a better understanding of the format of the exam. This will help you become familiar with the types of questions you can expect on the actual D-PST-DY-23 exam, and it will give you a chance to practice your test-taking skills. Test free online D-PST-DY-23 exam dumps questions below.

Page 1 of 9

1. A PowerStore cluster generated a major alert regarding an appliance running out of space.

What does this alert indicate?

Used capacity is above 80%

Used capacity is above 90%

Forecast time to full is 14 days or less

Forecast time to full is 28 days or less

2. Refer to the Exhibit.

Which port location in the graphic is used for network management connectivity on a PowerStore T?

3. Which two statements are true of PowerStore File Migration import? (Choose two.)

PS arrays are supported with PowerPath.

Both SMB and NFS are supported, but cannot be mixed.

VNX2 arrays are supported with VD

Snapshots and snapshot schedules are migrated

The source file system can be a replica.

4. Which protocol is commonly used to provide ESXi host access to vVols in PowerStore environments?

NFS

iSCSI

vSAN

vVols

5. A PowerStore X system is being implemented using Dell EMC S5248F-ON Ethernet switching as data switches.

What is required when configuring the VLT interconnects on the data switches?

Assign the switch default route for the VLT traffic

Set the VLT connection to the switch default VLAN

On each switch, select the switch management port MAC as the VLT MAC

Configure the VLT MACs with a matching unique made-up address

6. What is the primary benefit of configuring remote replication for file storage resources in PowerStore?

Accelerating network performance

Reducing storage capacity requirements

Ensuring data availability in case of site failures

Simplifying authentication processes

7. Refer to the exhibit.

Which host initiator type can be added to the existing host group?

Solaris iSCSI

ESXi NVMe

Windows FC

ESXi iSCSI

Windows iSCSI

8. A PowerStore appliance is running out of storage capacity. The cluster consists of a PowerStore 5000T appliance with three NVMe expansion enclosures.

How can this issue be resolved?

Add additional SAS expansion enclosures.

Add an additional PowerStore appliance.

Enable advanced deduplication.

Add additional NVMe expansion enclosures.

9. Which IP network range does the PowerStore Discovery Network use?

128.221.0.0/16

192.168.1.200/24

169.254.0.0/16

128.221.1.249/25

10. Which SMB Version is disabled by default in a PowerStore T?

SMB 3.1.1

SMB 2

SMB 3

SMB 1

Page 2 of 9

11. What is the relationship between RPO and RTO in data protection?

They are interchangeable terms.

RPO defines data loss tolerance, while RTO defines downtime tolerance.

RPO and RTO have no relevance in data protection.

RTO defines data loss tolerance, while RPO defines downtime tolerance.

12. Refer to the exhibit.

Which SMB path is used to access the share from client side?

\SMB-FS07SalesHmarine_Sales

as-smb07.hmarine testSMB-FS07 Hmarine_Sales

\SMB-FS07Hmarine_Sales

as-smb07.hmarine.test Hmarine_Sales

13. A PowerStore T cluster has 3 appliances. Users are unable to access NAS services.

What might be the issue?

Master appliance is off-line

NAS appliance failover is incorrectly configured

Trial license is expired

Resource balancer service has failed

14. Which configuration step is required to install the ImportKit?

Select the network interface for the management control path.

Configure the MPIO active path and failover policy.

Configure the host iSCSI initiator connectivity to PowerStore.

Select the RSA key that the HTTPS certificate uses on the host data path.

15. What is the purpose of applying a protection policy to a block storage resource in PowerStore?

To define the amount of storage space allocated

To ensure data security through encryption

To automate backup and recovery processes

To optimize network bandwidth usage

16. An administrator received the following alert from PowerStore regarding a previously created NAS server?

Description: The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.

Which setting should the administrator change?

UDS

SMB

LDAP

NTP

17. SIMULATION

A storage admin is setting up a new protection policy with only snapshot rule for a new file system in PowerStore.

The administrator is given the below parameters.

- File system name: FS-1 on SMB-NAS Server.

- Size: 5TB

- New protection policy: Policy-1

- Snapshot rule: Snap-Rule only for Tuesdays on Hourly basis with default retention.

Use the simulator to perform the configuration task.

When you have finished continue to the next question.

18. What are two supported combinations of source and destination vVol Storage Containers when replicating Resource Groups on PowerStore? (Choose two.)

Multiple replications in different directions.

One-to-many replication volumes from one source PowerStore to multiple destination PowerStore appliances.

Cascade replication to three different sites.

One-to-one replication arouofrom source storage container to destination storage container.

19. An administrator is trying to connect to PowerStore using SSH with PuTTY and log in as the service user.

Which port do they need to SSH to?

443

8443

20. When planning rack layout, why should base enclosures be grouped together?

Power distribution requirements

Rack weight balance

Ease of cable management

Hot aisle requirement

Page 3 of 9

21. Which PowerStore configuration is designed for high-performance, enterprise-grade workloads?

PowerStore T

PowerStore S

PowerStore A

PowerStore M

22. What is required to establish client access to PowerStore file storage using NFS or SMB protocols?

World Wide Names (WWNs)

Host initiator software

IP addresses of clients

SNMP community strings

23. SIMULATION

Use the simulator to create a new 100 GB volume. Use a category of Other. Associate the new volume with a protection policy that includes a rule that takes a snapshot every hour Monday-Friday and retains it for 5 days.

When you have finished continue to the next question.

24. An NVMe host has four volumes that are directly provisioned. When setting up a new NVMe host group, the host is not shown in the available host list.

Why can the host not be added to the host group?

The host initiator type is incorrect

The host has mapped volumes

The host is part of another host group

The host is not using the same OS

25. Which storage type is typically used for storing user files, documents, and media in PowerStore?

Block storage

Object storage

Cloud storage

File storage

26. What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?

Select the folder location on the host for the program installation

Select the RSA key for configuring the control path HTTPS certificate

Configure the network port and interface for the host data path

Configure the network port and interface for the management control path

27. SIMULATION

You're absolutely right! I apologize for my previous response. I can definitely try to extract the text from the image.

Here's the "Task" as written in the image:

A storage administrator must provision local storage resources for his database as per the below requirements:

Create a new "Database" storage resource as a capacity of 5TB PowerStore under load must prioritize this workload

ESXi host called "ESXi3" is using iSCSI connectivity

The ESXi host must use the LUN number of 101

Use the simulator to make this configuration change.

28. Which drive configuration is available for the PowerStore Expansion Enclosure?

NVMe SSD (all slots)

NVMe SCM (all slots)

NVMe NVRAM (all slots)

SAS SSD (all slots)

29. Which file sharing protocols are available for the UNIX and Linux clients during NAS Server creation?

NFSv3 and Secure NFS

NFSv3 and SFTP

NFSv4 and Secure NFS

NFSv3 and NFSv4

30. A storage administrator has configured the addition of a VNX2 as a remote system for migration.

Which Import External Storage migration feature architectural components are now established?

Host iSCSI initiators are registered on the VNX2 storage system

Data path and management control path to the source storage system

Data path and management control path to the access host

Host Fibre Channel initiators are registered on the VNX2 storage system

Page 4 of 9

31. What is the primary goal of the PowerStore Migration feature?

Increasing CPU performance

Automating backup processes

Enabling cloud storage integration

Facilitating the movement of data between storage systems

32. What role does the migration target play in the PowerStore migration process?

It manages data deduplication.

It initiates the migration process.

It analyzes migration logs.

It receives and stores the migrated data.

33. Which three features are included in PowerStore X licensing? (Choose three.)

vSphere

Metro node

[Migration

Replication

Snapshots

34. Refer to the exhibit.

Use the simulator to assign a protection policy to the virtual machine “VM1”.

Use the following settings:

- Snapshots on Monday through Friday at 10:00 PM Eastern Time

- Retention of 10 days

When you have finished, continue to the next question.

35. What are two supported front end connectivity options for block storage access on PowerStore? (Select 2)

iSCSI

RDMA

RoCE

NVMe

InfiniBand

36. Which protocol is commonly used for client access to file storage in PowerStore environments?

iSCSI

NFS

SMB

Fibre Channel

37. Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?

REST

SOAP

VAAI

VASA

38. Install the host ImportKit

39. When adding an appliance to a cluster, what is the minimum number of additional IP addresses needed to configure the management network?

40. A PowerStore Administrator was tasked with provisioning block storage to hosts using iSCSI initiators. The Administrator configured iSCSI Auto Discovery IP address, but the iSCSI initiators are NOT automatically discovered in PowerStore Manager.

What is the issue?

IQN Auto Discovery is not enabled on the PowerStore cluster

An iSCSI embedded module is connected to the cluster

CHAP authentication is disabled

CHAP authentication is enabled

Page 5 of 9

41. What is the final step in the PowerStore migration process?

Cleaning the source servers

Decommissioning the source storage

Sending migration logs to support

Allocating more CPU resources

42. What does vVols stand for in the context of PowerStore VMware provisioning?

Virtual Volatile Storage

Virtual Viable Solutions

Virtual Volumes

Volatile Virtual Machines

43. Which two migration tasks are configured during a non-disruptive import in PowerStore? (Choose two.)

Host Cleanup

Refresh Volumes

Refresh Hosts

Start Copy

44. What is the default performance policy on PowerStore?

Medium

Low

Highest

High

45. What is the primary benefit of remote replication for disaster recovery in PowerStore?

Reducing CPU usage

Minimizing network traffic

Ensuring data availability and business continuity

Optimizing file storage allocation

46. Which two components of Port Group Policy, indicates that the initiator and target connectivity is set while provisioning a volume to an ESXi host using iSCSI connectivity? (Choose two.)

Active

1QN

ICompliant

MPIO

47. What does setting the alert threshold to 0 (zero) do when configuring replication rules?

A. Disables all alerts for any missed RPO cycles.

B. Generates an alert if the data saved during the RPO cycle exceeds 20% of the storage object capacity

C. Enables alerts if the RPO cycle was missed for three consecutive cycles.

D. Generates an alert if the synchronization time exceeds the RPO.

48. What is the role of PowerStore Manager in the context of VMware storage provisioning?

Allocating CPU resources to virtual machines

Creating vCenter clusters

Managing vVols and storage resources

Monitoring network traffic

49. A storage administrator has provisioned 10 × 2GB volumes. 400MB of data is written to each of the ten volumes.

What is the Thin Savings ratio for this configuration?

3:1

4:1

5:1

6:1

50. What is the main advantage of block provisioning over file provisioning in storage systems?

Better compatibility with cloud storage

More efficient use of storage capacity

Faster data retrieval times

Easier integration with virtualization technologies

Page 6 of 9

51. What does the remote replication Planned Failover operation do?

Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy

Fully synchronizes the source and destination data states and reverses the replication direction

Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state

Fully synchronizes the destination to the data state of the source and promotes the destination to production

52. An administrator is attempting to create a protection policy while creating an SMB share however the option is not available.

What is the reason?

The protection policy has been previously associated with a file system

The protection policy must be created before associating it with the volume resource

The protection policy must be created before associating it with the file system

The protection policy is only available with file level retention enabled

53. While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?

Type: Term-Based, Status: Active

Status: Perpetual, Type: Open

Type: Perpetual, Status: Active

Status: Term-Based, Type: Unlimited

54. What is the maximum number of appliances that can be connected to form a cluster?

1 in a PowerStore T cluster, 4 in a PowerStore X cluster

1 in a PowerStore T cluster, 1 in a PowerStore X cluster

4 in a PowerStore T cluster, 4 in a PowerStore X cluster

4 in a PowerStore T cluster, 1 in a PowerStore X cluster

55. What is the maximum supported retention time when using snapshot retention periods on PowerStore arrays?

90 days

120 days

365 days

730 days

56. A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects.

Which action could resolve the issue?

Configure VLT and Link Aggregation Control Protocol

Implement VLT and Dynamic Link Aggregation Group

Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group

Implement Dynamic Link Aggregation Group

57. After running an assisted migration PowerStore continues to generate alerts regarding space optimization on one of the four appliances.

What needs to be done to free more space on the affected appliance?

Add more hard drives

Run Assisted Migration again

Manual remediation

Add another appliance

58. What does a Storage Administrator need to consider about Resource Balance when assigning volumes?

Whether the Cluster is offline Node failure status I/O utilization

Whether the appliance is online Appliance failure status Cluster utilization

Whether the Node is offline Appliance failure status Node utilization

Whether the appliance is offline Appliance failure status Capacity utilization

59. Which requirement is important when considering the migration of data using PowerStore Migration?

Number of social media followers

Available Wi-Fi networks

Compatibility with source systems

Amount of RAM in the server

60. What does a Logical Unit Number (LUN) represent in PowerStore provisioning?

A physical storage disk

A network switch

A virtual storage volume

A backup schedule

Page 7 of 9

61. Which IP addresses are required when adding an appliance to the cluster?

DNS and NTP

Storage and NTP

Management and Storage

Management and DNS

62. What is a requirement for the Import External Storage migration feature?

PowerStore Global Storage Discovery IP address must be configured

PowerPath host-based multipathing software

PowerStore LACP bonded ports are tagged for replication

Direct Fibre Channel connections between storage systems

63. Which network topology is commonly used for connecting PowerStore nodes and switches?

Star topology

Bus topology

Ring topology

Mesh topology

64. A Storage administrator configured a read-only NFS export for a specific set of UNIX hosts and added the IP addresses to the host access list. There have been reports that unauthorized hosts are able to access the export.

What is the required setting to correct this problem?

Minimum security: Kerberos

Minimum Security: sys

Default access: read only

Default access: no access

65. Use the simulator to create an SMB NAS server using the following information:

• NAS and SMB computer name: payrollserver

• Network interface: BaseEnclosure-bond1

• IP address: 192.168.2.20

• Subnet: /24

• Gateway: 192.168.2.254

• VLAN: 1504

• AD/DNS: 192.168.2.50

• Windows domain name: company.com

• Domain administrator credentials: Administrator/password

When you have finished continue to the next question.

66. An administrator receives an alert on a PowerStore Cluster with three appliances:

The appliance A1 is projected to run out of space in 8 days Capacity utilization is above 90 percent

Which tools are available to assist the Administrator with a potential resolution?

Thin provision conversion wizard

System Optimization

Space reclamation wizard

Assisted Migration

67. Which of the following is a primary use case for Dell EMC PowerStore?

Running virtualized servers

Playing video games

3D rendering

Consolidated storage and data management

68. What is a potential challenge of remote replication in PowerStore?

Higher storage costs

Reduced network latency

Simplified management

Increased CPU usage

69. Order the steps for creating an SMB file share on a PowerStore.

Configure the NAS server. Provision the file system. Configure the server type. Create an SMB share.

Provision the file system. Configure the server type. Configure the NAS server. Create an SMB share.

Configure the server type. Configure the NAS server. Create an SMB share. Provision the file system.

Create an SMB share. Configure the server type. Configure the NAS server. Provision the file system.

70. What does the remote replication Failover operation do?

Fully synchronizes the source and destination data states and reverses the replication direction

Fully synchronizes the source and destination data states and stops the current replication session

Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state

Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy

Page 8 of 9

71. What are the two parameters defined in a PowerStore replication rule? (Choose two.)

Recovery Point Objective

Alert threshold

Recovery Time Objective

Date and time of creation

72. What is the purpose of configuring Ethernet switching for a PowerStore system?

To enable Wi-Fi connectivity

To optimize storage capacity

To manage power distribution

To establish network connectivity between storage nodes

73. Which network is used for storage migration between PowerStore T appliances?

Cluster

Management

vMotion

Storage

74. What are three requirements of asynchronous file replication? (Choose three.)

A. Create FC zoning between PowerStore.

B. Configure Data Storage Network.

C. Create bond 1 and Tag replication.

D. Create Remote System.

E. Configure File Mobility Network.

75. Which two pieces of information are required to create a new remote system connection? (Choose two.)

IP address of local system

Network Latency

IP address of remote system

Remote PowerStore name

Remote domain name

76. A PowerStore administrator is creating a host group.

Which two protocol types can be selected for a new host group? (Choose two.)

InfiniBand

iSCSI

NVMe/TCP

77. What is a result of removing a remote replication session?

Replica is deleted from the replication destination.

Remote system relationship is removed.

Replica remains on the replication destination.

Replica data state is preserved on source system snapshot.

78. Which three file replication operations are available in PowerStore Manager? (Choose three.)

Planned Failover

Reverse

Resume

Unplanned Failover

Resynchronize

79. What is the purpose of applying a protection policy to a virtual machine created on a vVol in PowerStore?

Defining CPU and memory allocation

Automating backup and recovery operations

Managing network switch configurations

Enhancing guest OS security

80. What is required for metro connectivity in a vSphere environment?

VMware SRM is enabled.

Stretched vSphere cluster

Host is located in local site

Host is located in remote site

Page 9 of 9

81. What role does a NAS server play in PowerStore file provisioning?

Allocating LUNs

Managing object storage

Hosting shared file systems

Creating virtual machines

82. What is the role of the migration source in the PowerStore migration process?

It defines the network settings.

It provides the destination storage.

It holds the data to be migrated.

It configures the target applications.

83. A storage administrator needs to group Volume-1 and Volume-2 for consistency. The group should have a snapshot every day that is retained for 25 hours.

Use the simulator to make this configuration change.

When you have finished continue to the next question.

84. A storage administrator has configured the addition of a VNX2 as a remote system for migration.

What is the result of this configuration?

PowerStore iSCSI initiators are registered on the VNX2 system

PowerStore Fibre Channel initiators are register on the VNX2 system

Import sessions from the VNX2 are started for all Windows host accessed LUNs

Import sessions from the VNX2 are scheduled for automatic cutover

85. What is the benefit of using quotas in PowerStore file provisioning?

Increasing data transfer speeds

Managing user authentication

Limiting storage usage per user

Reducing network latency

86. Refer to the Exhibit.

Which port location in the graphic is used for network management connectivity on a PowerStore X?

87. What is a benefit of using thin provisioning for block storage in PowerStore?

Improved host access speeds

Reduced storage capacity waste

Enhanced data encryption

Simplified network configurations

88. What administrative tasks are needed to increase the capacity of the vVols datastore without the use of the VSI plugin?

Change the storage container quota in PowerStore Manager and refresh the datastore capacity in vSphere

Change the storage container quota in PowerStore Manager and restart the VASA service in vSphere

Change the datastore capacity in vSphere and restart the VAAI service in PowerStore Manager

Change the datastore capacity in vSphere and refresh the storage container quota in PowerStore Manager

89. What technology does PowerStore leverage to pool and manage storage resources efficiently?

Fiber Channel

Network Attached Storage (NAS)

PowerScale

Storage Class Memory (SCM)

TAGS:

D-PST-DY-23, D-PST-DY-23 exam dumps

Notify of

Label

Name*

Email*

Website

Label

Name*

Email*

Website

0 Comments

Oldest

Newest Most Voted

Inline Feedbacks

View all comments

Get D-PST-DY-23 Dumps Full Version

Q&As: 284
Versions: PDF and Software Download Now

About Dumpsinfo

Dumpsinfo is a good platform providing the latest exam information and dumps questions for all IT certification exams. You can study all the latest exam dumps questions online.

[email protected]

Mon - Sat 9:00am - 6:00pm

Valid D-PST-DY-23 Exam Dumps are Your best Choice to Pass

Related

Posts

Advance Your Career by Using Online D-PSC-MN-01 Dumps

D-NWR-DY-01 Exam Dumps – Reliable Way to Pass and Get Certified

DELL EMC D-VXR-OE-23 Exam Questions Simulate Actual D-VXR-OE-23 Exam

Prepare D-SNC-DY-00 Exam with Using D-SNC-DY-00 Dump Questions

About Us

EMAIL

Services

Opening Hours